VCDS VAG COM VAGCOM?10.6 HEX CAN USB

Read before you order:

1. VAGCOM 10.6 has the same function as VAGCOM 908 and VAGCOM 912, it just support more car models than vagcom 908 and vagcom 912, not other updates.

• 2. Almost VW, AUDI cars before 2010 year are supported! We can NOT guarantee on all 2010 year cars. And we can NOT 100% guarantee it supports your car, as we can not test every models. Consider before you order it, we can NOT offer you a correct support car list now.


• 3. We only have English version software. We only guarantee it works well on Windows XP.? Please use the software provide by our disk only, do NOT use original software which will disable the cable.


• 4. Our vagcom cables can only read and erase error codes, can NOT programming or make parameter adaptions

?

Install tips: -

1. Make sure that software and drivers are installed correctly from the supplied disc.

2. Connected cable to computer, but NOT connect to car, make sure you see [picture 1] as showed below.

3. Run the software, in the option menu press test and save.

4. Close the VCDS software and connect to car., put the ignition key on, without starting engine.

5. Start VCDS software and make the test again.

6. Enjoy it.

?

If occur error while test, like "interface not found", no response, please try following changes: -

7. Change system time befor November of 2008, for example 20/10/2008

8. Change computer for test.

?

If unfortunatley all tries are fail, please contact us for help. Please tell us which steps you failed, and capture a screen shot for us. Don't worry, we are here to help you.

?

?

[picture 1]

1. Use a Windows XP computer.
2. Change the computer date into 2009 Feb 5.
3. Close the antivirus software.
4. Don't update the cable with original software.

Our software only works well with 32bit Windows XP. Windows Vista or Windows 7, 64bit computer may not support well. (though some customer has success install the cable on Vista and work well(specify the USB driver manually), but we can not guarantee)

Please do NOT use original software of 10.6. It will disable the cable! Only use the software we provide.

Por favor no utilice el software original de 10.6. Se deshabilita el cable! S??lo el uso del software que ofrecemos.

Prega di non utilizzare software originale di 10.6. Esso consente di disattivare la cavo! Utilizzare solo il software che offriamo.

S'il vous pla?t n'utilisez pas le logiciel original de 10.6. Il d??sactivera le c?ble! Utilisez uniquement les logiciels que nous fournissons.

Bitte nutzen Sie die Original-Software von 10.6. Es wird deaktivieren Sie die Kabel! Verwenden Sie nur die Software, die wir liefern.

Beta versions contain new features and functions that have not yet been as fully tested as have Release versions. If you use a Beta, you may find bugs or problems and you are expected to report them to us so that we can fix them before making a new Release. Please be sure that you have also installed the latest version on your computer as well so that you can revert back to using that if you encounter problems with the Beta.

Beta 10.6 includes the following new features and improvements:

Basic Settings for latest Control Modules using UDS/ODX/ASAM protocols.

As is the case for other functions under UDS, there are no longer any channel or group numbers. Instead, the Basic Setting to be performed must be selected from a drop-down list:

On UDS control modules which offer "Instructions", VCDS will automatically display them:

In addition, UDS Measuring Values can be displayed simultaneously:

Added ability to view Measuring Values during UDS Output Tests. This can be handy to verify that certain outputs are functioning as intended:

Improved Readiness screen, now shows name of script in title bar and under [Set Readiness] button, or gives a reason why [Set Readiness] is disabled when that is the case:

Support for new and revised models such as the face-lifted 2010 T5 van.

New, revised and expanded ODX/ASAM data set, supporting Basic Settings function and additional new control modules under UDS.

Works only with Intelligent Interfaces (HEX, KEY and Micro-CAN).

Works on Windows 2000, XP, Vista and 7. Windows 95, 98 and ME are no longer supported.

Keywords:
VCDS V10.6, vag com10.6, BETA V10.6, VAG 10.6, vag 10.6, vag com 10.6, vag com 10.6, vag-com, vag com, vag V10.6, vag v10.6, vag com v10.6, vag com v10.6