VCDS VAG 908.1 updated ODX data for 2010 models

VAGCOM?10.6 is available, see if you need it.

http://www.dandebiz.com/vcds-vag-com-vagcom-106-hex-can-usb_p17320.html

VAG 908.1 updated ODX data for 2010 models

?1. Use a Windows XP computer.
2. Change the computer date into 2009 Feb 5.
3. Close the antivirus software.
4. Don't update the cable with original software.

Our software only works well with 32bit Windows XP.? Windows Vista or Windows 7, 64bit computer ?may not support well. (though some customer has success install the cable on Vista and work well(specify the USB driver manually), but we can not guarantee)

Please do NOT use original software of 908.1. It will disable the cable! Only use the software we provide.

Por favor no utilice el software original de 908,1. Se deshabilita el cable! S鐠愮珮o el uso del software que ofrecemos.

Prega di non utilizzare software originale di 908,1. Esso consente di disattivare la cavo! Utilizzare solo il software che offriamo.

S'il vous pla?t n'utilisez pas le logiciel original de 908,1. Il d閼煎嵒activera le c?ble! Utilisez uniquement les logiciels que nous fournissons.

Bitte nutzen Sie die Original-Software von 908,1. Es wird deaktivieren Sie die Kabel! Verwenden Sie nur die Software, die wir liefern.

Almost VW, AUDI cars before 2010 year are supported! We can not guarantee on 2010 year cars. And we can not 100% guarantee it supports your car, as we can not test every models. Thank you for your understanding!

?

Following steps to install: -
1. Make sure that software and drivers are installed correctly from the supplied disc.
2. Connected cable to computer, but NOT connect to car.
3. Run the software, in the option menu press test and save.
4. Close the VCDS software and connect to car., put the ignition key on, without starting engine.
5. Start VCDS software and make the test again.
6. Work ok.

If occur error while test, like "interface not found", no response, please try following changes: -
1. Change system time befor Apr 2009
2. Change computer for test.
3. Change software to test

www.dandebiz.com/freedownload/VAG908_Installer_v100.zip

www.dandebiz.com/freedownload/VAG908_Installer_v150.zip

If unfortunatley all tries are fail, please contact us for exchange! Very sorry!

?

Supports Measuring Values, Output Tests, and Adaptations on control modules using the new UDS/ODX/ASAM protocol.

Adds new UDS addresses and updated ODX data for 2010 models.

Includes support for TP1.6 protocol which is required for the 6J Ibiza and speeds up access on many modules in other models.

The Select Control Module screen now shows "Installed Modules" rather than "Common Modules" if the car being worked on is new enough to have a proper CAN Gateway.
Modified SRI Screen to show more info and force user to select a job before proceeding.
Adds drop-box function selection in Basic Settings and Adaptation.
Reads Mileage stored in many EDC16 ECUs.
New CODES file, now with over 13, 000 fault code and measuring value texts.
New USB drivers for enhanced PC compatibility and stability.
New firmware for HEX interfaces required for compatibility with 6J Ibiza
Updated Label files; better documentation for new and existing models.



Keywords:

VCDS V908, vag com908, BETA V908, VAG 908.1, vag 908, vag com 908.1, vag com 908, vag-com, vag com, vag V908, vag v908.1, vag com v908, vag com v908

- <david> :?2011 A4 support?, September 8, 2010

Hi, does this cable/supplied software work the 2011 A4 models? Specifically a US spec A4. -Thanks

Reply by Dandebiz Team:
Hi David, This cable only can do 2010 models. Any other question, please feel free to contact us. Regards, Michelle

- <Jose> :?very cheap, December 10, 2009

very cheap, work well with my car. It\'s my second time buying from dandebiz. thank you.

- <Sergio> :?i order 5 pcs, January 5, 2010

i order 5 pcs this time and will introduce my friend to you as talked. pls offer some discount to me next time. thank you.

- <Nancy> :?good communication, January 22, 2010

thanks for nikko\'s good communication. the cable works very well.

- <Giulio> :?Everything OK !, January 25, 2010 ( FEATURED REVIEW )

Works perferctly on Ibiza 6J, execellent communication and very fast shipment / delivery. Thanks !!

- <Stephane> :?Nice product, January 29, 2010

Workes flawlessly with my Passat TDI 2005

- <Stephane> :?Nice product, January 29, 2010

Workes flawlessly with my Passat TDI 2005

- < Ginis> :?mechanic, January 30, 2010

Dear sirs, I am interested on this item VAG 805.1. This is the latest version of the VAGCOM? With the cable comes also the software in a disc? Does the software comes in the Greek language? This supports all the group vag models? Please answer me as soon as possible. My email adress is sxxxxgong@hotmail.com. Thank you in advance for your help. Best Regards Spiros Ginis (We have contact you via Email. Thank you! --Nikko)

- < loup> :?obd 2, February 1, 2010

bonsoir, juste savoir si le cable est compatible avec LEON 1P et POLO VW 1999-2001 ? (No estamos seguros de algunos modelos de autom鐠愮iles antiguos, si son 16 pines de interfaz, es compatible. For question, please send email to us. --Nikko)

- < few problems> :?conection probl. with the car, February 2, 2010

Hi Thank you for the product. I installed the soft and hooked up to the car, it seems like the pc and car does not connect. i tried on a different laptop, same problem. Did anyone else had that probl? (Please send your quetion to info@dandebiz.com, we will contact you for solution. We can not contact with you if you leave message here. --Nikko)

- < Mierlut> :?fair deal, February 10, 2010 ( FEATURED REVIEW )

As the person with \'few problems\', it happened to me too. But it was my fault. So, first make sure that software and drivers are installed correctly from the supplied disc (in the option menu press test - cable connected ok but no car connection). Close the vcds software and connect CAN to car connector, put the ignition key on, without starting engine - start vcds software and make the test again - this time will work ok, but in this order: pc, car, ignition, software. As for the deal, shipping was fast, cables arrived in perfect condition, price is ok (not the cheapest, but fair) and support is great. Will buy again with pleasure. Thank you. (Thank you so much for your professional comment. It\'s great help for all visitors. --Nikko)

- <Bj?rn> :?Very good Interface, February 11, 2010

This Interface is so nice to use, works well on my Skoda Octavia 2 (1Z).

- <Cruis> :?very good cable, March 9, 2010

good communication, good product. will buy again.

- < zRt.> :?Perfect solution, March 11, 2010 ( FEATURED REVIEW )

In two weeks I received the package. Installation was without any issue. I tested it on a Passat B6 and an Audi Q7 - both were perfect, working fine. Thank you.

- <khalidassrory> :?VCDS VAG 908.1 , March 12, 2010

iwant to get VCDS VAG 908.1

- <Nick> :?VAGCOM 908.1, March 16, 2010 ( FEATURED REVIEW )

Works like a charm, good communication, very pleased with the product, will buy again, Thanks Nikko :) Car: Audi A4 B8

- <george> :?vagcom, March 22, 2010

hi im george from greece and iam an electrician iam intrested for vag com diagnostic tool but i want it for all models 1995-2010 i want to tell me how will cost to come to greece. thank you . [vagcom 908 support most 1995-2009 cars (16 pin interface, not all 2010 cars tested, we can not guarantee), VW, Audi. Ship by airmail to Greece cost about $8.9. Please contact info@dandebiz.com. --Nikko]

- <Raimond> :?VAGCOM 908.1, March 23, 2010

Works great, fast shiping. Thanks

- < michel> :?compra, March 24, 2010

soy de la ciudad de mexico D.F. com le puedo hacer para comprar mi software saludos [P鐠愮珱gase en contacto con nosotros info@dandebiz.com Gracias. --Nikko]

- <Udo> :?VAGCOM908, March 25, 2010

funktioniert super einwandfrei

- < ??????? > :?588501, March 26, 2010

?????? ?????

- <RalphMalph> :?Change settings ?, April 2, 2010

Hello, I would like to know if you can change settings and update without a problem ? Greetings, RalphMalph [can NOT update via internet -Nikko]

- <jerome> :?vagcom 908.1, April 7, 2010

marche nickel sur une passat b6 tdI 140 de 2005

- <coolwater> :?Audi A4 2010 B8 8K, April 10, 2010

Great price. Fast shipping. Worked the first time on my A4 B8. Made some changes to add remote control for windows and gauge sweep. Will be doing my bi-xenon conversion soon.

- <Kenton> :?well receive, April 28, 2010

well receive. work rightly.

- <Pembroke> :?so well, May 4, 2010

so well

- <Franklin> :?Bon vendeur merci , May 6, 2010

Bon vendeur merci

- < ragab> :?engneering, May 7, 2010

thank you

- <?nal> :?Works good, May 14, 2010

Works great, fast shiping. Thanks But i have the software vcds 908.0 in English I need the Software VCDS 908.1 in German. [Hi ?nal, thanks for support. But the software for 908.1 is English only. Other things we could help? Send email to us info@dandebiz.com. Have a nice day.- Michelle]

- < aur閼煎崹ie> :?Es que le logiciel est en fran?ais?, May 25, 2010

Es que le logiciel est en fran?ais? [Uniquement en anglais. D\'autres questions, pls n\'h閼煎嵒itez pas 閼?nous contacter.-Michelle]

- <elijah> :?well received, June 25, 2010

well received

- <Softalino> :?software version, July 9, 2010

Just received the VCDS VAG tool and it is working perfect. But I ordered the 908.1 version but received the 908.0 version. Can I download the 908.1 version somewhere??? Thank you!!![Hi Softalino, There\'s no difference between 908 & 908.1 crack version. Different version of software just for different batch of cables(hardware). So, please use software provided in your CD. Other version may be not suitable for your cable. And, DO NOT use original software which will disable your cables. Any other questions, pls feel free to contact us via info@dandebiz.com. - Michelle]

- <martin> :?want to buy, July 13, 2010

hi,i d like to know,how much will be total price for wag 908.1 hex cable include postage i pounds.i saw 59us dollars,but u dont have there the postage to united kingdom.many thanks martin

Reply by Dandebiz Team:
Hi Martin, You can change currency in Currencies area and estimate shipping cost in the Estimate Shipping Costs area after you add the product to cart. Total Cost is ?49.13 shipped by Standard Air Mail or ?59.74 shipped by Expedited Express. It come with the diagnostic software. Regards, Michelle

- < Francisco> :?Brazilians cars, August 26, 2010

Hello,this equipment works on flex Brazilians?which the price of a piece with shipping to Brazil?

Reply by Dandebiz Team:
Hi Sergio, Cable 908.1 can only do VW/Audi. Is flex Brazilians your local brand? We haven\'t heard of it. Maybe you can ask your dealer what tool is needed and see if we have it or not. Any other question, please feel free to contact us. Regards, Michelle

- <Eugene> :?Audi A4 2008, January 6, 2011

Hello, can this do my Audi A4 2008 闁?

Reply by Dandebiz Team:
Dear Eugene, Yes, it can do your car. Any other question, please feel free to contact us via info@dandebiz.com. Regards, Michelle

- <Martin> :?windows 7, February 1, 2011

When do you have a update that works with windows 7? Kind regards Martin

Reply by Dandebiz Team:
Dear Martin, There is no version for Win 7 now. When there is any update, we will notice you by email. Regards, Michelle

- < manuel de huelva> :?golf VI, February 16, 2011

this product works for golf VI 2010?and for windows 7?

Reply by Dandebiz Team:
Dear Jose, We would like to recommend this for you: http://www.dandebiz.com/vcds-vag-com-vagcom-106-hex-can-usb_p17320.html Only work on Windows XP computer. For futher information, please feel free to contact us via info@dandebiz.com. Regards, Michelle