VAGCOM 912 is available, see if you need it.

http://www.dandebiz.com/vcds-vag-com-vagcom-912-hex-can-usb_p7963.html

VAG 908.1 is out of stock now. VAGCOM 912 will be sent instead.

VAG 908.1 updated ODX data for 2010 models

Our software only works well with 32bit Windows XP. Windows Vista or Windows 7, 64bit computer may not support well. (though some customer has success install the cable on Vista and work well(specify the USB driver manually), but we can not guarantee)

Please do NOT use original software of 908.1. It will disable the cable! Only use the software we provide.

Por favor no utilice el software original de 908,1. Se deshabilita el cable! Sólo el uso del software que ofrecemos.

Prega di non utilizzare software originale di 908,1. Esso consente di disattivare la cavo! Utilizzare solo il software che offriamo.

S'il vous plaît n'utilisez pas le logiciel original de 908,1. Il désactivera le câble! Utilisez uniquement les logiciels que nous fournissons.

Bitte nutzen Sie die Original-Software von 908,1. Es wird deaktivieren Sie die Kabel! Verwenden Sie nur die Software, die wir liefern.

Almost VW, AUDI cars before 2010 year are supported! We can not guarantee on 2010 year cars. And we can not 100% guarantee it supports your car, as we can not test every models. Thank you for your understanding!

Following steps to install: -
1. Make sure that software and drivers are installed correctly from the supplied disc.
2. Connected cable to computer, but NOT connect to car.
3. Run the software, in the option menu press test and save.
4. Close the VCDS software and connect to car., put the ignition key on, without starting engine.
5. Start VCDS software and make the test again.
6. Work ok.

If occur error while test, like "interface not found", no response, please try following changes: -
1. Change system time befor Apr 2009
2. Change computer for test.
3. Change software to test

www.dandebiz.com/freedownload/VAG908_Installer_v100.zip

www.dandebiz.com/freedownload/VAG908_Installer_v150.zip

If unfortunatley all tries are fail, please contact us for exchange! Very sorry!

Supports Measuring Values, Output Tests, and Adaptations on control modules using the new UDS/ODX/ASAM protocol.

Adds new UDS addresses and updated ODX data for 2010 models.

Includes support for TP1.6 protocol which is required for the 6J Ibiza and speeds up access on many modules in other models.

The Select Control Module screen now shows "Installed Modules" rather than "Common Modules" if the car being worked on is new enough to have a proper CAN Gateway.
Modified SRI Screen to show more info and force user to select a job before proceeding.
Adds drop-box function selection in Basic Settings and Adaptation.
Reads Mileage stored in many EDC16 ECUs.
New CODES file, now with over 13, 000 fault code and measuring value texts.
New USB drivers for enhanced PC compatibility and stability.
New firmware for HEX interfaces required for compatibility with 6J Ibiza
Updated Label files; better documentation for new and existing models.



Keywords:

VCDS V908, vag com908, BETA V908, VAG 908.1, vag 908, vag com 908.1, vag com 908, vag-com, vag com, vag V908, vag v908.1, vag com v908, vag com v908

VAGCOM 912 is available, see if you need it.

http://www.dandebiz.com/vcds-vag-com-vagcom-912-hex-can-usb_p7963.html

VAG 908.1 is out of stock now. VAGCOM 912 will be sent instead.

VAG 908.1 updated ODX data for 2010 models

Our software only works well with 32bit Windows XP. Windows Vista or Windows 7, 64bit computer may not support well. (though some customer has success install the cable on Vista and work well(specify the USB driver manually), but we can not guarantee)

Please do NOT use original software of 908.1. It will disable the cable! Only use the software we provide.

Por favor no utilice el software original de 908,1. Se deshabilita el cable! Sólo el uso del software que ofrecemos.

Prega di non utilizzare software originale di 908,1. Esso consente di disattivare la cavo! Utilizzare solo il software che offriamo.

S'il vous plaît n'utilisez pas le logiciel original de 908,1. Il désactivera le câble! Utilisez uniquement les logiciels que nous fournissons.

Bitte nutzen Sie die Original-Software von 908,1. Es wird deaktivieren Sie die Kabel! Verwenden Sie nur die Software, die wir liefern.

Almost VW, AUDI cars before 2010 year are supported! We can not guarantee on 2010 year cars. And we can not 100% guarantee it supports your car, as we can not test every models. Thank you for your understanding!

Following steps to install: -
1. Make sure that software and drivers are installed correctly from the supplied disc.
2. Connected cable to computer, but NOT connect to car.
3. Run the software, in the option menu press test and save.
4. Close the VCDS software and connect to car., put the ignition key on, without starting engine.
5. Start VCDS software and make the test again.
6. Work ok.

If occur error while test, like "interface not found", no response, please try following changes: -
1. Change system time befor Apr 2009
2. Change computer for test.
3. Change software to test

www.dandebiz.com/freedownload/VAG908_Installer_v100.zip

www.dandebiz.com/freedownload/VAG908_Installer_v150.zip

If unfortunatley all tries are fail, please contact us for exchange! Very sorry!

Supports Measuring Values, Output Tests, and Adaptations on control modules using the new UDS/ODX/ASAM protocol.

Adds new UDS addresses and updated ODX data for 2010 models.

Includes support for TP1.6 protocol which is required for the 6J Ibiza and speeds up access on many modules in other models.

The Select Control Module screen now shows "Installed Modules" rather than "Common Modules" if the car being worked on is new enough to have a proper CAN Gateway.
Modified SRI Screen to show more info and force user to select a job before proceeding.
Adds drop-box function selection in Basic Settings and Adaptation.
Reads Mileage stored in many EDC16 ECUs.
New CODES file, now with over 13, 000 fault code and measuring value texts.
New USB drivers for enhanced PC compatibility and stability.
New firmware for HEX interfaces required for compatibility with 6J Ibiza
Updated Label files; better documentation for new and existing models.



Keywords:

VCDS V908, vag com908, BETA V908, VAG 908.1, vag 908, vag com 908.1, vag com 908, vag-com, vag com, vag V908, vag v908.1, vag com v908, vag com v908

This product is English version only.

How to install VAG COM 812.4 in my computer? (Guideline)

VAG-COM 812.4

Features:

Compatible with the newest cars which require a direct CAN connection for diagnostics including all Golf-5 platform cars and latest Audi A3, A6 and A8,Q7,etc.

Protocol timing indistinguishable from a real VAG/VAS tool. Works reliably even with "difficult" control modules such as the 1991-1994 1Z Audi TDIs and the 1993-1994 Audi 2.6L with Hella ECU. Built-In VAG-Saver functionality -- instantly alerts the user if either the K/K1 line or the L/K2 line is shorted to Ground or Vbatt.

Full support for dual-K lines found in "new" (B6/8E chassis Audi A4 and 2002+ Audi A6,A8,etc.

1. USB connector plugs into most modern laptops!

2. Compatible with the latest cars which require a direct CAN connection for diagnostics including all Golf-5 platform cars and latest Audi A3, A6 and A8.

3. Protocol timing indistinguishable from a real VAG/VAS tool. Works reliably even with "difficult" control modules such as the 1991-1994 1Z Audi TDIs and the 1993-1994 Audi 2.6L with Hella ECU.

4. Built-In VAG-Saver functionality -- instantly alerts the user if either the K/K1 line or the L/K2 line is shorted to Ground or Vbatt.

5. Full support for dual-K lines found in "new" (B6/8E chassis Audi A4 and 2002+ Audi A6 -- no VAS-6017 required -- no manual switches!

6. Fully backwards compatible with older cars using a single K-line or K plus L.

7. Bi-Color (red/green) status/activity LED

The product description:

OBDII Can USB with the latest cars which require a direct CAN connection for diagnostics including all Golf-5 platform cars and latest Audi A3, A6 and A8,Q7.

Protocol timing indistinguishable from a real VAG/VAS tool.

The possibility that software is complete is on the xxxxx renewal, function all of, support the car type to 2007.

Diagnostics Type including:

All Golf-5 platform cars (A5 platform) including:

• 2003+ VW Touran (1T chassis)
• 2004+ VW Golf (1K chassis)
• 2004+ VW Caddy (2K chassis)
• 2004+ Audi A3 (8P chassis)
• 2004+ Seat Altea (5P chassis)
• 2004+ Skoda Octavia (1Z chassis)
• 2005+ Seat Toledo (5P chassis)
• 2005+ Golf Plus (5M chassis)
• 2005+ Seat Leon (1P chassis)
• 2005.5+ Jetta (1K chassis)
• 2006+ Eos (1F chassis)
• 2003+ Audi A8 and A8L (D3 platform, 4E chassis)
• 2005+ Audi A6 (C6 platform, 4F chassis)
• 2005+ Audi A4 ("B7" platform) (some control modules)
• 2005.5+ VW Passat (B6 Platform, 3C chassis)
• 2006+ Audi Q7 (4L chassis)
• 2007+ Audi R8 (42 chassis)
• 2007+ Audi TT (8J chassis)
• 2007+ VW Touareg (7L6 chassis) ("facelift", built after Nov. 30 2006)

This product is English version only.

How to install VAG COM 812.4 in my computer? (Guideline)

VAG-COM 812.4

Features:

Compatible with the newest cars which require a direct CAN connection for diagnostics including all Golf-5 platform cars and latest Audi A3, A6 and A8,Q7,etc.

Protocol timing indistinguishable from a real VAG/VAS tool. Works reliably even with "difficult" control modules such as the 1991-1994 1Z Audi TDIs and the 1993-1994 Audi 2.6L with Hella ECU. Built-In VAG-Saver functionality -- instantly alerts the user if either the K/K1 line or the L/K2 line is shorted to Ground or Vbatt.

Full support for dual-K lines found in "new" (B6/8E chassis Audi A4 and 2002+ Audi A6,A8,etc.

1. USB connector plugs into most modern laptops!

2. Compatible with the latest cars which require a direct CAN connection for diagnostics including all Golf-5 platform cars and latest Audi A3, A6 and A8.

3. Protocol timing indistinguishable from a real VAG/VAS tool. Works reliably even with "difficult" control modules such as the 1991-1994 1Z Audi TDIs and the 1993-1994 Audi 2.6L with Hella ECU.

4. Built-In VAG-Saver functionality -- instantly alerts the user if either the K/K1 line or the L/K2 line is shorted to Ground or Vbatt.

5. Full support for dual-K lines found in "new" (B6/8E chassis Audi A4 and 2002+ Audi A6 -- no VAS-6017 required -- no manual switches!

6. Fully backwards compatible with older cars using a single K-line or K plus L.

7. Bi-Color (red/green) status/activity LED

The product description:

OBDII Can USB with the latest cars which require a direct CAN connection for diagnostics including all Golf-5 platform cars and latest Audi A3, A6 and A8,Q7.

Protocol timing indistinguishable from a real VAG/VAS tool.

The possibility that software is complete is on the xxxxx renewal, function all of, support the car type to 2007.

Diagnostics Type including:

All Golf-5 platform cars (A5 platform) including:

• 2003+ VW Touran (1T chassis)
• 2004+ VW Golf (1K chassis)
• 2004+ VW Caddy (2K chassis)
• 2004+ Audi A3 (8P chassis)
• 2004+ Seat Altea (5P chassis)
• 2004+ Skoda Octavia (1Z chassis)
• 2005+ Seat Toledo (5P chassis)
• 2005+ Golf Plus (5M chassis)
• 2005+ Seat Leon (1P chassis)
• 2005.5+ Jetta (1K chassis)
• 2006+ Eos (1F chassis)
• 2003+ Audi A8 and A8L (D3 platform, 4E chassis)
• 2005+ Audi A6 (C6 platform, 4F chassis)
• 2005+ Audi A4 ("B7" platform) (some control modules)
• 2005.5+ VW Passat (B6 Platform, 3C chassis)
• 2006+ Audi Q7 (4L chassis)
• 2007+ Audi R8 (42 chassis)
• 2007+ Audi TT (8J chassis)
• 2007+ VW Touareg (7L6 chassis) ("facelift", built after Nov. 30 2006)

BMW Carsoft 6.5

MCU controlled Interface for Carsoft 6.5 which is compatible with the original interface. Fully digital line switchings and MCU controlled service reset timing.

Main Functions
Digital total test: It gives you a complete idea of the overall condition of the car
Digital single test: It gives you detailed information about the appropriate control unit. Stored errors will be shown in a written report. This report has a short info-text which help you to eliminate the error.

Special functions for some models: Including service interval reset, component activation, live data, LCM reading, sync. EWS and ECU, adaptation values, and coding

Applications list
• E30 - 3 Series
• DME ALL
• DDE ALL
• AB From 1998
• BC/MID ALL
• DWA ALL
• E36-3 Series
• DME ALL
• DDE ALL
• KOMBI Except kompakt
• AB ALL
• ABS ALL
• ASC ALL
• BC/MID ALL
• DWA ALL
• ZKE From 1994
• ZVM Till 1994
• HKL ALL
• EGS ALL
• EWS ALL
• E46 - 3 Series
• DME ALL
• DDE ALL
• KOMBI ALL
• AB ALL
• ABS ALL
• ASC ALL
• DSC ALL
• ZKE ALL
• HKL ALL
• EGS ALL
• EWS ALL
• LCM ALL
• CCM ALL
• PDC ALL
• CVM ALL
• Z3
• DME ALL
• AB ALL
• ABS ALL
• ASC ALL
• ZKE ALL
• HKL ALL
• EGS ALL
• EWS ALL
• E34 - 5 Series
• DME ALL
• DDE ALL
• KOMBI From 02/98
• AB ALL
• ABS From 1992
• ASC From 1992
• BC/MID ALL
• DWA ALL
• ZKE ALL
• HKL ALL
• EGS ALL
• EWS ALL
• E39 - 5 Series
• DME ALL
• DDE ALL
• KOMBI ALL
• AB ALL
• ABS ALL
• ASC ALL
• DSC ALL
• ZKE ALL
• ZVM ALL
• HKL ALL
• EGS ALL
• EWS ALL
• LCM ALL
• CCM ALL
• PDC ALL
• E53 - X5
• DME ALL
• DDE ALL
• KOMBI ALL
• AB ALL
• ABS ALL
• ASC ALL
• DSC ALL
• ZKE ALL
• ZVM ALL
• E32 - 7 Series .... E38, E31, E52

BMW Carsoft 6.5

MCU controlled Interface for Carsoft 6.5 which is compatible with the original interface. Fully digital line switchings and MCU controlled service reset timing.

Main Functions
Digital total test: It gives you a complete idea of the overall condition of the car
Digital single test: It gives you detailed information about the appropriate control unit. Stored errors will be shown in a written report. This report has a short info-text which help you to eliminate the error.

Special functions for some models: Including service interval reset, component activation, live data, LCM reading, sync. EWS and ECU, adaptation values, and coding

Applications list
• E30 - 3 Series
• DME ALL
• DDE ALL
• AB From 1998
• BC/MID ALL
• DWA ALL
• E36-3 Series
• DME ALL
• DDE ALL
• KOMBI Except kompakt
• AB ALL
• ABS ALL
• ASC ALL
• BC/MID ALL
• DWA ALL
• ZKE From 1994
• ZVM Till 1994
• HKL ALL
• EGS ALL
• EWS ALL
• E46 - 3 Series
• DME ALL
• DDE ALL
• KOMBI ALL
• AB ALL
• ABS ALL
• ASC ALL
• DSC ALL
• ZKE ALL
• HKL ALL
• EGS ALL
• EWS ALL
• LCM ALL
• CCM ALL
• PDC ALL
• CVM ALL
• Z3
• DME ALL
• AB ALL
• ABS ALL
• ASC ALL
• ZKE ALL
• HKL ALL
• EGS ALL
• EWS ALL
• E34 - 5 Series
• DME ALL
• DDE ALL
• KOMBI From 02/98
• AB ALL
• ABS From 1992
• ASC From 1992
• BC/MID ALL
• DWA ALL
• ZKE ALL
• HKL ALL
• EGS ALL
• EWS ALL
• E39 - 5 Series
• DME ALL
• DDE ALL
• KOMBI ALL
• AB ALL
• ABS ALL
• ASC ALL
• DSC ALL
• ZKE ALL
• ZVM ALL
• HKL ALL
• EGS ALL
• EWS ALL
• LCM ALL
• CCM ALL
• PDC ALL
• E53 - X5
• DME ALL
• DDE ALL
• KOMBI ALL
• AB ALL
• ABS ALL
• ASC ALL
• DSC ALL
• ZKE ALL
• ZVM ALL
• E32 - 7 Series .... E38, E31, E52

Device Description:

Processor: ELM327 USB

OBD-II Protocols: ISO15765-4 (CAN)

ISO14230-4 (KWP2000)

ISO9141-2

J1850 VPW

J1850 PWM

Output protocol: RS232

Baud rate: 9600 or 38400

Indicator LEDs: OBD Tx/Rx, RS232 Tx/Rx, Power

Operating voltage: 12V, internal protection from short circuits/overvoltages

Nominal idle current: 45 mA



Description:

OBD-II Software for ELM327 USB is a free program that allows you to use your PC and a hardware interface to get the information from your car's computer.

The program is very user-friendly, and easy to learn. It is also very easy to install: simply extract the files into a folder on your computer's hard drive, and you're ready to go. To uninstall the program, simply delete the entire contents of the folder where the program resides.

The software supports two platforms - DOS and Windows.



Features:

The program lets you perform the following operations:

Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).

Clear trouble codes and turn off the MIL ("Check Engine" light)

Display current sensor data, including:

Engine RPM

Calculated Load Value

Coolant Temperature

Fuel System Status

Vehicle Speed

Short Term Fuel Trim

Long Term Fuel Trim

Intake Manifold Pressure

Timing Advance

Intake Air Temperature

Air Flow Rate

Absolute Throttle Position

Oxygen sensor voltages/associated short term fuel trims

Fuel System status

Fuel Pressure

Many others...



Upcoming Features:

Data graphing and logging

Freeze Frame data

Continuous and Non-Continuous Oxygen Sensor test results

Free software:

Scantool.net

GM Mode 22 Scan Tool by Terry

OBD Gauge for PalmOS and Pocket PC by Dana Peters

OBD Logger by Jonathan Senkerik

OBD-II ScanMaster by Wladimir Gurskij (ScanMaster 3.52 - local copy)

obd2crazy.com

OBD2 Scantool by Ivan Andrewjeski

OBDII for ELM322 by David Huffman

pyOBD by Donour Sizemore for MacOSX and Linux

RDDTC by Pete Calinski

Real Scan by Brent Harris

ScanTest for Pocket PC by Ivan Ganev aka a-ser

wOBD by WDT



Aavailable cars:

Benz 2001/02/03 W203 C200K (ISO)

BMW X5 2002 (ISO) Chevrolet Aveo (ISO)

Citroen C3 2004 (ISO) ? Daihatsu YRV 2005 (ISO)

Daihatsu YRV Turbo 2006 (ISO)

Fiat Tipo 2002 (ISO)

Ford New?ocus 2006(CAN)



Honda Accord 2006 JDM (ISO)

Honda Accord Euro R 2004 JDM (ISO)

Honda City GD8 (ISO)

Honda Civic ES 1.6A (ISO)

Honda Integra Type R DC5 JDM (ISO)

Honda Jazz 1.4M (ISO)



Hyundai Accent 2004 (ISO)

Hyundai Getz 1.3A 2004 (ISO)

Hyundai Getz 1.6M 2004 (ISO)

Hyundai Matrix 2004 (ISO)

Hyundai Santa Fe 2.4A (ISO)

Hyundai Sonata GLS (ISO)

Hyundai Sonata 2005 (ISO)

Hyundai Tuscani FX (ISO)

Kia Carens 2005 (ISO)

Kia Magentis 2005 (ISO)

Kia Rio LS (ISO)

Kia Sorento SUV 2005 (ISO)

Lexus es300 Mazda 2 (CAN)

Mazda 5 (CAN)

Mazda 6 (CAN)

Mazda Premacy 2001 (ISO)

Mazda RX8 (CAN)

Mitsubishi Colt 2003 (ISO)

Mitsubishi Colt Plus 2005 (ISO)

Mitsubishi Eclipse(GST-----Turbo Car can be tested for the year 1995-2000 ；RS/GS----1994-1996 GS all can do；Turbo Car for the year 1996-2000,only have speed and TPS，can clear the DTCS)

Mitsubishi Lancer Evolution IX 2006 (ISO)

Mitsubishi Pajero 3.5 V6 2006 (ISO)

Nissan Sunny B14 (ISO)

Nissan Sunny VIP FB15 (ISO)

Nissan X-Trail 2.0L 2004 (ISO)

Nissan X-Trail 2.5L 2004 (ISO)

Peugeot 206 2001 –Only can show RPM

Peugeot 206 (ISO)

Peugeot 307 (ISO)

Peugeot 407 (ISO)

Renault Megane II 2005 (ISO)

Renault Kangoo 2006 (ISO)

Subaru Impreza 1.6TS 2002 (ISO)

Subaru Impreza WRX 2005 (ISO)

Toyota Camry 2.0A 2004 (ISO)

Toyota Camry 2.4A 2005 (ISO)

Toyota Corolla Altis 1.6A 2005 (ISO)

Toyota Corolla GLXi G8 1999 (ISO)

Toyota Corolla G9 2002 (ISO)

Toyota Vios 2004 (ISO)



Not available veichles:

Mazda 323 Protege 2003 (OBD-I)

Mitsubishi Lancer 1.6M 2006

Nissan Sunny (N16)

Nissan Cefiro (Teana) 2005

Nissan sentra 1.8 2000/2005

Nissan Cefiro (Teana) 2005

Proton Perdana V6

Subaru Legacy GT 2005

Toyota camry 2002

Toyota Wish JDM (Missing Pin 5 in DLC)

Toyota IST JDM (Missing Pin 5 in DLC)

Toyota altis 1.8 2004

Peugeot 206 2000

Suzuki Jimny 1.3 2000

Diesel engine



Package includes:

Elm327 main unit

One com interface

One USB cables

One CD software

FAQ: What is the difference of V.15 ELM327, Plastic ELM327 and Bluetooth ELM327?

There have the same functions. The only difference is the interface:-

The V1.5 ELM327 has both usb and com interface,

The Plastic ELM327 has usb interface only,

The Bluetooth ELM327 has no cable, it works via bluetooth wirelessly.

ELM327 USB Scanner Tool CAN-BUS OBD II (Plastic)

ELM327 V1.5 USB COM OBD2 CAN-BUS Scanner

Our Price:
US$29.98

ELM327 Bluetooth Scanner Tool CAN-BUS OBD II (Wireless Bluetooth)

EOBD2 FLASHER Galletto 1260

EOBD2 FLASHER 1260 is an easy hardware for auto chip tuning.

Working on EDC16,EDC15, MEx.x ,DELCO and many more engine4s ecu. It is compatible with the newest modern diesel TDi, HDi, JTD, and petrol cars.

Supports more cars than any other obd2, eobd tuning tools


Compatible with:
AUDI VW SEAT SKODA

VW BOSCH_EDC15V 29F400BT R/W A3 1.9 TDI 90CV
Rotating Pump A3 1.9 TDI 110CV
A4 1.9 TDI 90CV
A4 1.9 TDI 110CV
A6 1.9 TDI 110CV

Bora 1.9 TDI
Golf 4 1.9 TDI
New Beeatle 1.9 TDI
Passat 1.9 TDI
Sharan 1.9 TDI

Skoda Fabia 1.9 TDI
Skoda Octavia 1.9 TDI
Skoda Superb 2.5 TDI V6

VW BOSCH_EDC15V 29F400BT R/W A2 1.4 TDI 75CV
Polo 1.4 TDI 75CV

AUDI BOSCH_EDC15P 29F400BT R/W A2 1.4 TDI 80CV
A3 1.9 TDI 101CV
A3 1.9 TDI 130CV
A4 1.9 TDI 101CV
A4 1.9 TDI 115CV
A4 1.9 TDI 130CV
A6 1.9 TDI 101CV
A6 1.9 TDI 130CV

Bora 1.9 PD
Golf 4 1.9 PD
Lupo 1.2 / 1.4 PD
New Beeatle 1.9 PD
Passat 1.9 PD
Polo 1.4 / 1.9 PD
Sharan 1.9 PD

Skoda Fabia 1.9 PD
Skoda Octavia 1.9 PD

AUDI BOSCH_ME7.5.5 / ME7.1.5 29F400BT R/W A3 1.8 TURBO 20V 150CV
29F800BT A3 1.8 TURBO 20V 180CV
A3 S3 1.8 TURBO 20V 225CV
A4 1.8 TURBO 20V 150CV
A4 1.8 TURBO 20V 180CV
A6 1.8 TURBO 20V 150CV
A6 1.8 TURBO 20V 180CV
TT 1.8 TURBO 20V 150CV
TT 1.8 TURBO 20V 180CV
TT 4X4 1.8 TURBO 20V 225CV

Bora 1.8 Turbo
Golf 4 1.8 Turbo
New Beeatle 1.8 Turbo
Passat 1.8 Turbo
Sharan 1.8 Turbo

Skoda Octavia 1.8 Turbo
Skoda Superb 1.8 Turbo

AUDI BOSCH_EDC15V P40 V6 2500 E3 29F400BT R/W A4 2.5 TDI V6 155/180CV
A6 2.5 TDI V6 155/180CV
A8 2.5 TDI V6 155/180CV

Passat 2.5 V6 155CV

AUDI BOSCH_EDC15V P40 V6 2500 E4 29F800BT R/W A4 2.5 TDI V6 155/180CV
A6 2.5 TDI V6 155/180CV
A8 2.5 TDI V6 155/180CV

Passat 2.5 V6 155CV

AUDI VW BOSCH_EDC16U1 29BL802CB R/W A3 2.0 TDI 140 CV
A4 2.0 TDI 140 CV
A6 2.0 TDI PD

Caddy 1.9 TDI 105 CV
Caddy 2.0 TDI
Golf 5 2.0 TDI 140 CV
Golf 5 1.9 TDI 105 CV
Touran 1.9 / 2.0 TDI 105 CV
Tuareg 2.5 TDI 185 CV

Skoda Octavia 1.9/2.0 TDI PD

VW BOSCH_EDC16U1.2.1 E4 2 ECU 29BL802CB R/W Tuareg 5.0 V10 Read & Write 2 ECU


AUDI VW BOSCH_EDC16U31 M58BW0160 R/W A3 2.0 TDI 140 CV
A4 2.0 TDI 140 CV

Golf 5 1.9 TDI 105 CV
Golf 5 2.0 TDI 140 CV
Tuareg 2.5 TDI 185 CV

AUDI VW BOSCH_EDC16CP34 M58BW0160 R/W A4 3.0 TDI 217 CV
A4 3.0 TDI 4X4 231 CV
A6 2.7 TDI
A6 3.0 TDI 4X4 231 CV
A8 3.0 V6 TDI 215 CV E4

Tuareg 3.0 TDI 217 CV

AUDI BOSCH_ME7xx Boot Mode 29F400BB R/W TUTTE LE AUDI ME7 Boot Mode, pin 24 Flash to mass, see PDF in doc.

AUDI BOSCH_ME7xx Boot Mode 29F800BB R/W TUTTE LE AUDI ME7 Boot Mode, pin 24 Flash to mass, see PDF in doc.


BMW

BMW 320D 136 CV BOSCH_EDC15 2 PLCC 29F010 R/W Serie 3 (E46) 2.0 D EDC15
Serie 5 (E39) 2.0 D EDC15

BMW 330D BOSCH_EDC15 29F400BT R/W Serie 3 (E46) 3.0 D DDE4.0
Serie 5 (E39) 2.5 D DDE4.0
Serie 5 (E39) 3.0 D DDE4.0
Serie 7 (E38) 3.0 D DDE4.0
Serie X5 (E53) 3.0 D DDE4.0

BMW 330D BOSCH_EDC15 Complete 29F400BT R/W Serie 3 (E46) 3.0 D Only at the table
Serie 5 (E39) 2.5 D Only on the table
Serie 5 (E39) 3.0 D Only on the table
Serie 7 (E38) 3.0 D Only on the table
Serie X5 (E53) 3.0 D Only on the table

BMW MS41 SIEMENS 29F200BB R/W Serie 3 (E36) 2.0 i MS41
Serie 3 (E36) 2.5 i MS41
Serie 3 (E36) 2.8 i MS41
Serie 5 (E39) 2.0 i MS41
Serie 5 (E39) 2.5 i MS41
Serie 7 (E38) 2.8 i MS41
Z3 Roadster 2.0 MS41
Z3 Roadster 2.8 MS41

BMW MS42 SIEMENS 29F400BB R/W Serie 3 (E36) 2.0i Ms42
Serie 3 (E36) 2.3i Ms42
Serie 3 (E36) 2.5i Ms42
Serie 3 (E36) 2.8i Ms42
Serie 3 (E36) 3.0i Ms42
Serie 3 (E36) 3.2i Ms42
Serie 5 (E39) 2.0i Ms42
Serie 5 (E39) 2.5i Ms42
Serie 5 (E39) 2.3i Ms42
Serie 5 (E39) 2.8i Ms42
Serie 5 (E39) 3.0i Ms42
Serie 5 (E39) 3.2i Ms42

BMW MS43 SIEMENS 29F400BB R/W Serie 3 (E46) 2.0i Ms43
Serie 3 (E46) 2.3i Ms43
Serie 3 (E46) 2.5i Ms43
Serie 3 (E46) 2.8i Ms43
Serie 3 (E46) 3.0i Ms43
Serie 3 (E46) 3.2i Ms43
Serie 5 (E39) 2.0i Ms43
Serie 5 (E39) 2.3i Ms43
Serie 5 (E39) 2.5i Ms43
Serie 5 (E39) 2.8i Ms43
Serie 5 (E39) 3.0i Ms43
Serie 5 (E39) 3.2i Ms43

BMW 318 IS 16V BOSCH M52 MICRO CC460 R/W Serie 3 (E36) 1.8 i ME5.2.1b
Z3 Roadster 1.9 ME5.2.1b

BMW 318 IS BOSCH BMS46 29F200BB R/W Serie 3 (E46) 1.9 BMS46
Z3 Roadster 1.9 BMS46

BMW M3 E36 MSS50 SIEMENS 2 28F200BXB R/W M3 3.2 E36 MSS50
Z3 M 3.2 MSS50

BMW M3 E46 MSS52 SIEMENS 2 29F200BB R/W M3 3.2 E46 MSS52/53
M5 5.0 V8 MSS54
Z8 5.0 V8

BMW M3 E46 CSL MSS53 SIEMENS 2 29F400BB R/W M3 CSL (E46) 370CV MSS54

BMW ME71 BOSCH MOTRONIC 29F400BB R/W Serie 5 (E39) 4.4 D ME7.1
Serie 7 (E38) 4.4 D ME7.1
Serie X5 (E53) 4.4 D ME7.1


CHRYSLER

CHRYSLER BOSCH_EDC15 C2 29F400BT R/W Grand Cherokee 2.7 CRD
Jeep Cherokee 2.5 CRD
Jeep Cherokee 2.8 CRD
PT Cruiser 2.2 CRD
Voyager 2.5 CRD


CITROEN

CITROEN BOSCH_EDC15 C2 29F400BT R/W Berlingo 2.0 HDI
C5 2.0 HDI
C5 2.2 HDI
C8 2.0 HDI
C8 2.2 HDI
Evasion 2.0 HDI
Jumper 2.0 HDI
Jumper 2.2 HDI
Jumper 2.8 HDI
Jumpy 2.0 HDI
Picasso 2.0 HDI
Synergie 2.0 HDI
Xantia 2.0 HDI
Xsara 2.0 HDI
Xsara Picasso 2.0 HDI

Phedra 2.0 JTD
Phedra 2.2 JTD
Ulysse 2.0 JTD 16V
Ulysse 2.2 JTD 16V

CITROEN BOSCH_EDC16 C2 29BL802CB R/W Berlingo 2.0 HDI
C5 2.0 HDI
C5 2.2 HDI
C8 2.0 HDI
Evasion 2.0 HDI
Jumper 2.0 HDI
Jumper 2.2 HDI
Jumper 2.8 HDI
Jumpy 2.0 HDI
Picasso 2.0 HDI
Synergie 2.0 HDI
Xantia 2.0 HDI
Xsara 2.0 HDI
Xsara Picasso 2.0 HDI

CITROEN BOSCH_EDC16+ C34 M58BW0160 R/W Berlingo 2.0 HDI
C3 1.6 16V HDI
C4 1.6 16V HDI
C5 1.6 16V HDI
C5 2.0 HDI
C5 2.2 HDI
C8 1.6 16V HDI
C8 2.0 HDI
Evasion 2.0 HDI
Jumper 2.0 HDI
Jumper 2.2 HDI
Jumper 2.8 HDI
Jumpy 2.0 HDI
Picasso 2.0 HDI
Synergie 2.0 HDI
Xantia 2.0 HDI
Xsara 2.0 HDI
Xsara Picasso 2.0 HDI

CITROEN BOSCH_ME744 29F400BB R/W C2 1.6 16V E3
C3 1.6 16V E3
C4 1.6 16V E3
Saxo 1.6 16V E3

CITROEN BOSCH_ME745 R/W C3 1.6 16V E4 1-8
C4 1.6 16V E4

CITROEN MARELLI IAW 48P 29F200BB W Saxo 1.6 16V E3 Only Write

CITROEN MARELLI IAW 48P2 29F400BB R/W Saxo 1.6 16V E4

CITROEN_SAGEM2000_14 29F200BB TSOP R/W C1 1.4 8V E3
C2 1.4 8V E3
C3 1.4 8V E3

CITROEN SIEMENS SID 881/801 29F400BB R/W Berlingo 2.0 8V HDI 90CV E Read in Boot Mode, pin 28 Flash to mass
2.0 90CV C5 2.0 8V HDI 90CV E4 Read in Boot Mode, pin 28 Flash to mass
Picasso 2.0 8V HDI 90CV E4 Read in Boot Mode, pin 28 Flash to mass
Xantia 2.0 8V HDI 90CV E4 Read in Boot Mode, pin 28 Flash to mass
Xara 2.0 8V HDI 90CV E4 Read in Boot Mode, pin 28 Flash to mass

CITROEN SIEMENS SID 804 29F400BB R/W C2 1,4 8V HDI 70CV E4 Read in Boot Mode, pin 28 Flash to mass
1.4 70CV C3 1,4 8V HDI 70CV E4 Read in Boot Mode, pin 28 Flash to mass
Saxo 1,4 8V HDI 70CV E4 Read in Boot Mode, pin 28 Flash to mass

CITROEN SID 881/801//804/806 29F400BB R/W Berlingo 2.0 8V HDI 90CV E Boot Mode, pin 28 Flash to mass
1.4 70 CV & 2.0 90CV Boot Mode C1 1,4 8V HDI 70CV E4 Boot Mode, pin 28 Flash to mass
C2 1,4 8V HDI 70CV E4
C3 1,4 8V HDI 70CV E4 Boot Mode, pin 28 Flash to mass
C5 2.0 8V HDI 90CV E4 Boot Mode, pin 28 Flash to mass
Picasso 2.0 8V HDI 90CV E4 Boot Mode, pin 28 Flash to mass
Saxo 1,4 8V HDI 70CV E4 Boot Mode, pin 28 Flash to mass
Xantia 2.0 8V HDI 90CV E4 Boot Mode, pin 28 Flash to mass
Xara 2.0 8V HDI 90CV E4 Boot Mode, pin 28 Flash to mass


FERRARI

FERRARI M52 BOSCH MOTRONIC MICRO CC460 W 355 E 456 M5.2 CC460

FERRARI 360 MODENA BOSCH ME7 IBRIDA R/W Modena 3.6 Bosch ME7.3H4 Boot Mode, pin 20 Flash to mass

FERRARI 430 BOSCH ME7.3.2 29F800BB R/W 430 4.3 V8 Bosch ME7.3.2 Read in Boot Mode, see PDF in doc.


ALFA FIAT LANCIA

Alfa Fiat Lancia BOSCH_EDC 15C E2 R/W Alfa 145 1.9 JTD EDC15C5
Alfa 146 1.9 JTD EDC15C5
Alfa 156 1.9 JTD EDC15C5
Alfa 156 2.4 JTD EDC15C5
Alfa 166 2.4 JTD EDC15C5
Fiat Bravo/a 1.9 JTD EDC15C5
Fiat Multipla 1.9 JTD EDC15C5
Fiat Marea 1.9 JTD EDC15C5
Fiat Marea 2.4 JTD EDC15C5
Lancia K 2.4 JTD EDC15C5
Lancia Lybra 1.9 JTD EDC15C5
Lancia Lybra 2.4 JTD EDC15C5
Lancia Z 2.0 JTD EDC15C5

Alfa Fiat Lancia BOSCH_EDC 15C E3 29F400BT R/W Alfa 147 1.9 JTD 16V EDC15C7
Alfa 147 1.9 JTD 8V EDC15C7
Alfa 156 1.9 JTD EDC15C7
Alfa 156 2.4 JTD EDC15C7
Alfa 166 2.4 JTD EDC15C7
Fiat Bravo/a 1.9 JTD EDC15C7
Fiat Doblo 1.9 JTD EDC15C7
Fiat Ducato 2.0 JTD EDC15C7
Fiat Ducato 2.3 JTD EDC15C7
Fiat Ducato 2.8 JTD EDC15C7
Fiat Marea 1.9 JTD EDC15C7
Fiat Marea 2.4 JTD EDC15C7
Fiat Multipla 1.9 JTD EDC15C7
Fiat Palio 1.9 JTD EDC15C7
Fiat Scudo 2.0 JTD EDC15C7
Fiat Stilo 1.9 JTD EDC15C7
Lancia Lybra 1.9 JTD EDC15C7
Lancia Lybra 2.4 JTD EDC15C7
Lancia Thesis 2.4 JTD EDC15C7

FIAT PUNTO BOSCH_EDC15 C6 29F400BT R/W Fiat Punto 1.9 JTD EDC15C6
Fiat Punto 1.9 JTD EDC15C7

FIAT BOSCH_EDC 16C8 IBRIDA R/W Alfa 147 1.9 16v MJ E4DC16C8
Alfa 156 1.9 16v MJ E4DC16C8
Alfa 156 2.4 16v MJ E4DC16C8
Alfa 166 2.4 16v MJ E4DC16C8
Fiat Stilo 1.9 16v MJ E4DC16C8

FIAT BOSCH_EDC 16C9 29BL802CB R/W Alfa 147 1.9 16v MJ E4DC16C9
Alfa 156 1.9 16v MJ E4DC16C9
Alfa 156 2.4 16v MJ E4DC16C9
Alfa 166 2.4 16v MJ E4DC16C9
Fiat Stilo 1.9 16v MJ E4DC16C9
Fiat Idea 1.9 16v MJ E4DC16C9

FIAT BOSCH_EDC 16+ C39 M58BW0160 R/W Alfa 147 1.9 16v MJ E4DC16C8
Alfa 156 1.9 16v MJ E4DC16C8
Alfa 159 1.9 16v MJ E4DC16C8
Alfa 156 2.4 16v MJ E4DC16C8
Alfa 166 2.4 16v MJ E4DC16C8
Alfa 159 2.4 16v MJ E4DC16C8
Alfa 159 2.4 16v MJ E4DC16C8
Fiat Croma 1.9 16V
Fiat Croma 2.4 20V
Idea 1.9 16v MJ EDC16 C39
Fiat Stilo 1.9 16v MJ E4DC16C8

FIAT 1300 Multiget IAW MJD6JFH MPC555 R/W Punto 1.3 MULTIGET
Idea 1.3 MULTIGET
Panda New 1.3 MULTIJET

ALFA FIAT BOSCH M155 IBRIDA W Alfa 145 1.4 Bosch M1.5.5 Only Write, pin 10 Conn. A to 12 volts, see PDF in doc.
Alfa 145 1.6 Bosch M1.5.5 Only Write, pin 10 Conn. A to 12 volts, see PDF in doc.
Alfa 146 1.4 Bosch M1.5.5 Only Write, pin 10 Conn. A to 12 volts, see PDF in doc.
Alfa 146 1.6 Bosch M1.5.5 Only Write, pin 10 Conn. A to 12 volts, see PDF in doc.
Alfa 146 1.8 Bosch M1.5.5 Only Write, pin 10 Conn. A to 12 volts, see PDF in doc.
Alfa 146 2.0 Bosch M1.5.5 Only Write, pin 10 Conn. A to 12 volts, see PDF in doc.
Alfa 156 1.6 Bosch M1.5.5 Only Write, pin 10 Conn. A to 12 volts, see PDF in doc.
Alfa 156 1.8 Bosch M1.5.5 Only Write, pin 10 Conn. A to 12 volts, see PDF in doc.
Alfa 156 2.0 Bosch M1.5.5 Only Write, pin 10 Conn. A to 12 volts, see PDF in doc.
Alfa 166 2.0 Bosch M1.5.5 Only Write, pin 10 Conn. A to 12 volts, see PDF in doc.
Alfa 166 2.0 Bosch M1.5.5 Only Write, pin 10 Conn. A to 12 volts, see PDF in doc.
Alfa GTV 1.8 TS 16V M1.5.5 Only Write, pin 10 Conn. A to 12 volts, see PDF in doc.
Alfa GTV 2.0 TS 16V M1.5.5 Only Write, pin 10 Conn. A to 12 volts, see PDF in doc.
Alfa GTV 3.0 TS 16V M1.5.5 Only Write, pin 10 Conn. A to 12 volts, see PDF in doc.
Alfa Spider 1.8 TS M1.5.5 Only Write, pin 10 Conn. A to 12 volts, see PDF in doc.
Alfa Spider 2.0 TS 16V M1.5.5 Only Write, pin 10 Conn. A to 12 volts, see PDF in doc.
Alfa Spider 3.0 TS 16V M1.5.5 Only Write, pin 10 Conn. A to 12 volts, see PDF in doc.
Fiat Bravo/Brava 1.2 M1.5.5 Only Write, pin 10 Conn. A to 12 volts, see PDF in doc.

FIAT MARELLI_IAW 4AF 59F IBRIDA R/W 500 1.0/1.1 E3 IAW 59F
MICRO ST10F186 600 1.0/1.1 E3 IAW 59F
Doblr 1.2 8v MPI E3 IAW 59F
Panda 1.0/ 1.1 E3 IAW 59F
Punto 1.2 8v MPI E3 IAW 59F


FIAT MARELLI_IAW 49F /4EF IBRIDA R/W Bravo 1.6 16V IAE 49F
Bravo 1.6 16V IAE 4EF
Stilo 1.6 16V IAE 5NF
Multipla 1.6 16V IAE 5NF

ALFA BOSCH_ME2.1 IBRIDA W Alfa 156 2.0 ME2.1 Only Write
Alfa 166 2.0 V6 Turbo ME2.1 Only Write
Alfa 166 2.5 V6 24V ME2.1 Only Write
Alfa 166 3.0 V6 24V ME2.1 Only Write
Fiat Bravo/Brava 2.0 ME2.1 Only Write
Fiat Bravo/Brava 2.0 20V ME2.1 Only Write
Fiat Coupe 2.0 20V ME2.1 Only Write
Fiat Marea 2.4 MDI 20V ME2.1 Only Write
Lancia Lybra 2.0 i 20V ME2.1 Only Write

ALFA BOSCH_M2.1 28F200BXB R/W Alfa 156 2.5 M2.1
Alfa 166 2.0 V6 Turbo M2.1
Alfa 166 2.5 V6 24V M2.1
Alfa 166 3.0 V6 24V M2.1

MARELLI_IAW 59F /5NF IBRIDA R/W Multipla 1.6 16V IAE 5NF Read in Boot Mode, see PDF in documents
MICRO MOTOROLA New Panda 1.2 16V IAW 5NF Read in Boot Mode, see PDF in documents
Panda 1.2 8V IAW 5NF Read in Boot Mode, see PDF in documents
Punto 1.2 8V IAW 59F
Stilo 1.6 16V IAW 5NF Read in Boot Mode, see PDF in documents

FIAT BOSCH_ME73H4 EURO 4 IBRIDA R/W Fiat Punto 1.2 Bosch ME7.3.1 Boot Mode, pin 20 to mass
Boot Mode Fiat Stilo 2.4 Bosch ME7.3.1
Lancia Y 1.2 Bosch ME7.3.1 Boot Mode, pin 20 to mass

FIAT BOSCH_ME7.2.1 EURO3 IBRIDA R/W Fiat Punto 1.2 ME7.2.1 Euro3 Boot Mode, pin 20 to mass
Boot Mode Lancia Y 1.2 ME7.2.1 Euro3 Boot Mode, pin 20 to mass

ALFA BOSCH_ME7.2.1 EURO 3 IBRIDA R/W Alfa 156 2.0 ME2.1 Boot Mode, pin 20 to mass
Boot Mode Alfa 166 2.5 V6 24V ME2.1 Boot Mode, pin 20 to mass
Alfa GTV 3.0 V6 24V ME2.1 Boot Mode, pin 20 to mass
Alfa Spider 3.0 V6 24V ME2.1 Boot Mode, pin 20 to mass
Fiat Bravo/a 2.0 ME2.1 Boot Mode, pin 20 to mass
Fiat Bravo/a 2.0 20V ME2.1 Boot Mode, pin 20 to mass
Fiat Coupe 2.0 20V ME2.1 Boot Mode, pin 20 to mass
Fiat Marea 2.4 MDI 20V ME2.1 Boot Mode, pin 20 to mass
Lancia Lybra 2.0 i 20V ME2.1 Boot Mode, pin 20 to mass

ALFA BOSCH_ME7.3.1HA EURO

Package included:

1 pc x Galletto 1260 cable

1 pc Driver CD

FAQ:

Q: what is the difference between DigiProg OBD and Galletto 1260?

A: They are both ECU Chip Tuning machine,but they compatible with different cars.

ECU Tuning DigiProg OBD ECU-Flasher

ECU Tuning EOBD2 Galletto 1260 FLASHER

Our Price:
US$29.98

EOBD2 FLASHER Galletto 1260

EOBD2 FLASHER 1260 is an easy hardware for auto chip tuning.

Working on EDC16,EDC15, MEx.x ,DELCO and many more engine4s ecu. It is compatible with the newest modern diesel TDi, HDi, JTD, and petrol cars.

Supports more cars than any other obd2, eobd tuning tools


Compatible with:
AUDI VW SEAT SKODA

VW BOSCH_EDC15V 29F400BT R/W A3 1.9 TDI 90CV
Rotating Pump A3 1.9 TDI 110CV
A4 1.9 TDI 90CV
A4 1.9 TDI 110CV
A6 1.9 TDI 110CV

Bora 1.9 TDI
Golf 4 1.9 TDI
New Beeatle 1.9 TDI
Passat 1.9 TDI
Sharan 1.9 TDI

Skoda Fabia 1.9 TDI
Skoda Octavia 1.9 TDI
Skoda Superb 2.5 TDI V6

VW BOSCH_EDC15V 29F400BT R/W A2 1.4 TDI 75CV
Polo 1.4 TDI 75CV

AUDI BOSCH_EDC15P 29F400BT R/W A2 1.4 TDI 80CV
A3 1.9 TDI 101CV
A3 1.9 TDI 130CV
A4 1.9 TDI 101CV
A4 1.9 TDI 115CV
A4 1.9 TDI 130CV
A6 1.9 TDI 101CV
A6 1.9 TDI 130CV

Bora 1.9 PD
Golf 4 1.9 PD
Lupo 1.2 / 1.4 PD
New Beeatle 1.9 PD
Passat 1.9 PD
Polo 1.4 / 1.9 PD
Sharan 1.9 PD

Skoda Fabia 1.9 PD
Skoda Octavia 1.9 PD

AUDI BOSCH_ME7.5.5 / ME7.1.5 29F400BT R/W A3 1.8 TURBO 20V 150CV
29F800BT A3 1.8 TURBO 20V 180CV
A3 S3 1.8 TURBO 20V 225CV
A4 1.8 TURBO 20V 150CV
A4 1.8 TURBO 20V 180CV
A6 1.8 TURBO 20V 150CV
A6 1.8 TURBO 20V 180CV
TT 1.8 TURBO 20V 150CV
TT 1.8 TURBO 20V 180CV
TT 4X4 1.8 TURBO 20V 225CV

Bora 1.8 Turbo
Golf 4 1.8 Turbo
New Beeatle 1.8 Turbo
Passat 1.8 Turbo
Sharan 1.8 Turbo

Skoda Octavia 1.8 Turbo
Skoda Superb 1.8 Turbo

AUDI BOSCH_EDC15V P40 V6 2500 E3 29F400BT R/W A4 2.5 TDI V6 155/180CV
A6 2.5 TDI V6 155/180CV
A8 2.5 TDI V6 155/180CV

Passat 2.5 V6 155CV

AUDI BOSCH_EDC15V P40 V6 2500 E4 29F800BT R/W A4 2.5 TDI V6 155/180CV
A6 2.5 TDI V6 155/180CV
A8 2.5 TDI V6 155/180CV

Passat 2.5 V6 155CV

AUDI VW BOSCH_EDC16U1 29BL802CB R/W A3 2.0 TDI 140 CV
A4 2.0 TDI 140 CV
A6 2.0 TDI PD

Caddy 1.9 TDI 105 CV
Caddy 2.0 TDI
Golf 5 2.0 TDI 140 CV
Golf 5 1.9 TDI 105 CV
Touran 1.9 / 2.0 TDI 105 CV
Tuareg 2.5 TDI 185 CV

Skoda Octavia 1.9/2.0 TDI PD

VW BOSCH_EDC16U1.2.1 E4 2 ECU 29BL802CB R/W Tuareg 5.0 V10 Read & Write 2 ECU


AUDI VW BOSCH_EDC16U31 M58BW0160 R/W A3 2.0 TDI 140 CV
A4 2.0 TDI 140 CV

Golf 5 1.9 TDI 105 CV
Golf 5 2.0 TDI 140 CV
Tuareg 2.5 TDI 185 CV

AUDI VW BOSCH_EDC16CP34 M58BW0160 R/W A4 3.0 TDI 217 CV
A4 3.0 TDI 4X4 231 CV
A6 2.7 TDI
A6 3.0 TDI 4X4 231 CV
A8 3.0 V6 TDI 215 CV E4

Tuareg 3.0 TDI 217 CV

AUDI BOSCH_ME7xx Boot Mode 29F400BB R/W TUTTE LE AUDI ME7 Boot Mode, pin 24 Flash to mass, see PDF in doc.

AUDI BOSCH_ME7xx Boot Mode 29F800BB R/W TUTTE LE AUDI ME7 Boot Mode, pin 24 Flash to mass, see PDF in doc.


BMW

BMW 320D 136 CV BOSCH_EDC15 2 PLCC 29F010 R/W Serie 3 (E46) 2.0 D EDC15
Serie 5 (E39) 2.0 D EDC15

BMW 330D BOSCH_EDC15 29F400BT R/W Serie 3 (E46) 3.0 D DDE4.0
Serie 5 (E39) 2.5 D DDE4.0
Serie 5 (E39) 3.0 D DDE4.0
Serie 7 (E38) 3.0 D DDE4.0
Serie X5 (E53) 3.0 D DDE4.0

BMW 330D BOSCH_EDC15 Complete 29F400BT R/W Serie 3 (E46) 3.0 D Only at the table
Serie 5 (E39) 2.5 D Only on the table
Serie 5 (E39) 3.0 D Only on the table
Serie 7 (E38) 3.0 D Only on the table
Serie X5 (E53) 3.0 D Only on the table

BMW MS41 SIEMENS 29F200BB R/W Serie 3 (E36) 2.0 i MS41
Serie 3 (E36) 2.5 i MS41
Serie 3 (E36) 2.8 i MS41
Serie 5 (E39) 2.0 i MS41
Serie 5 (E39) 2.5 i MS41
Serie 7 (E38) 2.8 i MS41
Z3 Roadster 2.0 MS41
Z3 Roadster 2.8 MS41

BMW MS42 SIEMENS 29F400BB R/W Serie 3 (E36) 2.0i Ms42
Serie 3 (E36) 2.3i Ms42
Serie 3 (E36) 2.5i Ms42
Serie 3 (E36) 2.8i Ms42
Serie 3 (E36) 3.0i Ms42
Serie 3 (E36) 3.2i Ms42
Serie 5 (E39) 2.0i Ms42
Serie 5 (E39) 2.5i Ms42
Serie 5 (E39) 2.3i Ms42
Serie 5 (E39) 2.8i Ms42
Serie 5 (E39) 3.0i Ms42
Serie 5 (E39) 3.2i Ms42

BMW MS43 SIEMENS 29F400BB R/W Serie 3 (E46) 2.0i Ms43
Serie 3 (E46) 2.3i Ms43
Serie 3 (E46) 2.5i Ms43
Serie 3 (E46) 2.8i Ms43
Serie 3 (E46) 3.0i Ms43
Serie 3 (E46) 3.2i Ms43
Serie 5 (E39) 2.0i Ms43
Serie 5 (E39) 2.3i Ms43
Serie 5 (E39) 2.5i Ms43
Serie 5 (E39) 2.8i Ms43
Serie 5 (E39) 3.0i Ms43
Serie 5 (E39) 3.2i Ms43

BMW 318 IS 16V BOSCH M52 MICRO CC460 R/W Serie 3 (E36) 1.8 i ME5.2.1b
Z3 Roadster 1.9 ME5.2.1b

BMW 318 IS BOSCH BMS46 29F200BB R/W Serie 3 (E46) 1.9 BMS46
Z3 Roadster 1.9 BMS46

BMW M3 E36 MSS50 SIEMENS 2 28F200BXB R/W M3 3.2 E36 MSS50
Z3 M 3.2 MSS50

BMW M3 E46 MSS52 SIEMENS 2 29F200BB R/W M3 3.2 E46 MSS52/53
M5 5.0 V8 MSS54
Z8 5.0 V8

BMW M3 E46 CSL MSS53 SIEMENS 2 29F400BB R/W M3 CSL (E46) 370CV MSS54

BMW ME71 BOSCH MOTRONIC 29F400BB R/W Serie 5 (E39) 4.4 D ME7.1
Serie 7 (E38) 4.4 D ME7.1
Serie X5 (E53) 4.4 D ME7.1


CHRYSLER

CHRYSLER BOSCH_EDC15 C2 29F400BT R/W Grand Cherokee 2.7 CRD
Jeep Cherokee 2.5 CRD
Jeep Cherokee 2.8 CRD
PT Cruiser 2.2 CRD
Voyager 2.5 CRD


CITROEN

CITROEN BOSCH_EDC15 C2 29F400BT R/W Berlingo 2.0 HDI
C5 2.0 HDI
C5 2.2 HDI
C8 2.0 HDI
C8 2.2 HDI
Evasion 2.0 HDI
Jumper 2.0 HDI
Jumper 2.2 HDI
Jumper 2.8 HDI
Jumpy 2.0 HDI
Picasso 2.0 HDI
Synergie 2.0 HDI
Xantia 2.0 HDI
Xsara 2.0 HDI
Xsara Picasso 2.0 HDI

Phedra 2.0 JTD
Phedra 2.2 JTD
Ulysse 2.0 JTD 16V
Ulysse 2.2 JTD 16V

CITROEN BOSCH_EDC16 C2 29BL802CB R/W Berlingo 2.0 HDI
C5 2.0 HDI
C5 2.2 HDI
C8 2.0 HDI
Evasion 2.0 HDI
Jumper 2.0 HDI
Jumper 2.2 HDI
Jumper 2.8 HDI
Jumpy 2.0 HDI
Picasso 2.0 HDI
Synergie 2.0 HDI
Xantia 2.0 HDI
Xsara 2.0 HDI
Xsara Picasso 2.0 HDI

CITROEN BOSCH_EDC16+ C34 M58BW0160 R/W Berlingo 2.0 HDI
C3 1.6 16V HDI
C4 1.6 16V HDI
C5 1.6 16V HDI
C5 2.0 HDI
C5 2.2 HDI
C8 1.6 16V HDI
C8 2.0 HDI
Evasion 2.0 HDI
Jumper 2.0 HDI
Jumper 2.2 HDI
Jumper 2.8 HDI
Jumpy 2.0 HDI
Picasso 2.0 HDI
Synergie 2.0 HDI
Xantia 2.0 HDI
Xsara 2.0 HDI
Xsara Picasso 2.0 HDI

CITROEN BOSCH_ME744 29F400BB R/W C2 1.6 16V E3
C3 1.6 16V E3
C4 1.6 16V E3
Saxo 1.6 16V E3

CITROEN BOSCH_ME745 R/W C3 1.6 16V E4 1-8
C4 1.6 16V E4

CITROEN MARELLI IAW 48P 29F200BB W Saxo 1.6 16V E3 Only Write

CITROEN MARELLI IAW 48P2 29F400BB R/W Saxo 1.6 16V E4

CITROEN_SAGEM2000_14 29F200BB TSOP R/W C1 1.4 8V E3
C2 1.4 8V E3
C3 1.4 8V E3

CITROEN SIEMENS SID 881/801 29F400BB R/W Berlingo 2.0 8V HDI 90CV E Read in Boot Mode, pin 28 Flash to mass
2.0 90CV C5 2.0 8V HDI 90CV E4 Read in Boot Mode, pin 28 Flash to mass
Picasso 2.0 8V HDI 90CV E4 Read in Boot Mode, pin 28 Flash to mass
Xantia 2.0 8V HDI 90CV E4 Read in Boot Mode, pin 28 Flash to mass
Xara 2.0 8V HDI 90CV E4 Read in Boot Mode, pin 28 Flash to mass

CITROEN SIEMENS SID 804 29F400BB R/W C2 1,4 8V HDI 70CV E4 Read in Boot Mode, pin 28 Flash to mass
1.4 70CV C3 1,4 8V HDI 70CV E4 Read in Boot Mode, pin 28 Flash to mass
Saxo 1,4 8V HDI 70CV E4 Read in Boot Mode, pin 28 Flash to mass

CITROEN SID 881/801//804/806 29F400BB R/W Berlingo 2.0 8V HDI 90CV E Boot Mode, pin 28 Flash to mass
1.4 70 CV & 2.0 90CV Boot Mode C1 1,4 8V HDI 70CV E4 Boot Mode, pin 28 Flash to mass
C2 1,4 8V HDI 70CV E4
C3 1,4 8V HDI 70CV E4 Boot Mode, pin 28 Flash to mass
C5 2.0 8V HDI 90CV E4 Boot Mode, pin 28 Flash to mass
Picasso 2.0 8V HDI 90CV E4 Boot Mode, pin 28 Flash to mass
Saxo 1,4 8V HDI 70CV E4 Boot Mode, pin 28 Flash to mass
Xantia 2.0 8V HDI 90CV E4 Boot Mode, pin 28 Flash to mass
Xara 2.0 8V HDI 90CV E4 Boot Mode, pin 28 Flash to mass


FERRARI

FERRARI M52 BOSCH MOTRONIC MICRO CC460 W 355 E 456 M5.2 CC460

FERRARI 360 MODENA BOSCH ME7 IBRIDA R/W Modena 3.6 Bosch ME7.3H4 Boot Mode, pin 20 Flash to mass

FERRARI 430 BOSCH ME7.3.2 29F800BB R/W 430 4.3 V8 Bosch ME7.3.2 Read in Boot Mode, see PDF in doc.


ALFA FIAT LANCIA

Alfa Fiat Lancia BOSCH_EDC 15C E2 R/W Alfa 145 1.9 JTD EDC15C5
Alfa 146 1.9 JTD EDC15C5
Alfa 156 1.9 JTD EDC15C5
Alfa 156 2.4 JTD EDC15C5
Alfa 166 2.4 JTD EDC15C5
Fiat Bravo/a 1.9 JTD EDC15C5
Fiat Multipla 1.9 JTD EDC15C5
Fiat Marea 1.9 JTD EDC15C5
Fiat Marea 2.4 JTD EDC15C5
Lancia K 2.4 JTD EDC15C5
Lancia Lybra 1.9 JTD EDC15C5
Lancia Lybra 2.4 JTD EDC15C5
Lancia Z 2.0 JTD EDC15C5

Alfa Fiat Lancia BOSCH_EDC 15C E3 29F400BT R/W Alfa 147 1.9 JTD 16V EDC15C7
Alfa 147 1.9 JTD 8V EDC15C7
Alfa 156 1.9 JTD EDC15C7
Alfa 156 2.4 JTD EDC15C7
Alfa 166 2.4 JTD EDC15C7
Fiat Bravo/a 1.9 JTD EDC15C7
Fiat Doblo 1.9 JTD EDC15C7
Fiat Ducato 2.0 JTD EDC15C7
Fiat Ducato 2.3 JTD EDC15C7
Fiat Ducato 2.8 JTD EDC15C7
Fiat Marea 1.9 JTD EDC15C7
Fiat Marea 2.4 JTD EDC15C7
Fiat Multipla 1.9 JTD EDC15C7
Fiat Palio 1.9 JTD EDC15C7
Fiat Scudo 2.0 JTD EDC15C7
Fiat Stilo 1.9 JTD EDC15C7
Lancia Lybra 1.9 JTD EDC15C7
Lancia Lybra 2.4 JTD EDC15C7
Lancia Thesis 2.4 JTD EDC15C7

FIAT PUNTO BOSCH_EDC15 C6 29F400BT R/W Fiat Punto 1.9 JTD EDC15C6
Fiat Punto 1.9 JTD EDC15C7

FIAT BOSCH_EDC 16C8 IBRIDA R/W Alfa 147 1.9 16v MJ E4DC16C8
Alfa 156 1.9 16v MJ E4DC16C8
Alfa 156 2.4 16v MJ E4DC16C8
Alfa 166 2.4 16v MJ E4DC16C8
Fiat Stilo 1.9 16v MJ E4DC16C8

FIAT BOSCH_EDC 16C9 29BL802CB R/W Alfa 147 1.9 16v MJ E4DC16C9
Alfa 156 1.9 16v MJ E4DC16C9
Alfa 156 2.4 16v MJ E4DC16C9
Alfa 166 2.4 16v MJ E4DC16C9
Fiat Stilo 1.9 16v MJ E4DC16C9
Fiat Idea 1.9 16v MJ E4DC16C9

FIAT BOSCH_EDC 16+ C39 M58BW0160 R/W Alfa 147 1.9 16v MJ E4DC16C8
Alfa 156 1.9 16v MJ E4DC16C8
Alfa 159 1.9 16v MJ E4DC16C8
Alfa 156 2.4 16v MJ E4DC16C8
Alfa 166 2.4 16v MJ E4DC16C8
Alfa 159 2.4 16v MJ E4DC16C8
Alfa 159 2.4 16v MJ E4DC16C8
Fiat Croma 1.9 16V
Fiat Croma 2.4 20V
Idea 1.9 16v MJ EDC16 C39
Fiat Stilo 1.9 16v MJ E4DC16C8

FIAT 1300 Multiget IAW MJD6JFH MPC555 R/W Punto 1.3 MULTIGET
Idea 1.3 MULTIGET
Panda New 1.3 MULTIJET

ALFA FIAT BOSCH M155 IBRIDA W Alfa 145 1.4 Bosch M1.5.5 Only Write, pin 10 Conn. A to 12 volts, see PDF in doc.
Alfa 145 1.6 Bosch M1.5.5 Only Write, pin 10 Conn. A to 12 volts, see PDF in doc.
Alfa 146 1.4 Bosch M1.5.5 Only Write, pin 10 Conn. A to 12 volts, see PDF in doc.
Alfa 146 1.6 Bosch M1.5.5 Only Write, pin 10 Conn. A to 12 volts, see PDF in doc.
Alfa 146 1.8 Bosch M1.5.5 Only Write, pin 10 Conn. A to 12 volts, see PDF in doc.
Alfa 146 2.0 Bosch M1.5.5 Only Write, pin 10 Conn. A to 12 volts, see PDF in doc.
Alfa 156 1.6 Bosch M1.5.5 Only Write, pin 10 Conn. A to 12 volts, see PDF in doc.
Alfa 156 1.8 Bosch M1.5.5 Only Write, pin 10 Conn. A to 12 volts, see PDF in doc.
Alfa 156 2.0 Bosch M1.5.5 Only Write, pin 10 Conn. A to 12 volts, see PDF in doc.
Alfa 166 2.0 Bosch M1.5.5 Only Write, pin 10 Conn. A to 12 volts, see PDF in doc.
Alfa 166 2.0 Bosch M1.5.5 Only Write, pin 10 Conn. A to 12 volts, see PDF in doc.
Alfa GTV 1.8 TS 16V M1.5.5 Only Write, pin 10 Conn. A to 12 volts, see PDF in doc.
Alfa GTV 2.0 TS 16V M1.5.5 Only Write, pin 10 Conn. A to 12 volts, see PDF in doc.
Alfa GTV 3.0 TS 16V M1.5.5 Only Write, pin 10 Conn. A to 12 volts, see PDF in doc.
Alfa Spider 1.8 TS M1.5.5 Only Write, pin 10 Conn. A to 12 volts, see PDF in doc.
Alfa Spider 2.0 TS 16V M1.5.5 Only Write, pin 10 Conn. A to 12 volts, see PDF in doc.
Alfa Spider 3.0 TS 16V M1.5.5 Only Write, pin 10 Conn. A to 12 volts, see PDF in doc.
Fiat Bravo/Brava 1.2 M1.5.5 Only Write, pin 10 Conn. A to 12 volts, see PDF in doc.

FIAT MARELLI_IAW 4AF 59F IBRIDA R/W 500 1.0/1.1 E3 IAW 59F
MICRO ST10F186 600 1.0/1.1 E3 IAW 59F
Doblr 1.2 8v MPI E3 IAW 59F
Panda 1.0/ 1.1 E3 IAW 59F
Punto 1.2 8v MPI E3 IAW 59F


FIAT MARELLI_IAW 49F /4EF IBRIDA R/W Bravo 1.6 16V IAE 49F
Bravo 1.6 16V IAE 4EF
Stilo 1.6 16V IAE 5NF
Multipla 1.6 16V IAE 5NF

ALFA BOSCH_ME2.1 IBRIDA W Alfa 156 2.0 ME2.1 Only Write
Alfa 166 2.0 V6 Turbo ME2.1 Only Write
Alfa 166 2.5 V6 24V ME2.1 Only Write
Alfa 166 3.0 V6 24V ME2.1 Only Write
Fiat Bravo/Brava 2.0 ME2.1 Only Write
Fiat Bravo/Brava 2.0 20V ME2.1 Only Write
Fiat Coupe 2.0 20V ME2.1 Only Write
Fiat Marea 2.4 MDI 20V ME2.1 Only Write
Lancia Lybra 2.0 i 20V ME2.1 Only Write

ALFA BOSCH_M2.1 28F200BXB R/W Alfa 156 2.5 M2.1
Alfa 166 2.0 V6 Turbo M2.1
Alfa 166 2.5 V6 24V M2.1
Alfa 166 3.0 V6 24V M2.1

MARELLI_IAW 59F /5NF IBRIDA R/W Multipla 1.6 16V IAE 5NF Read in Boot Mode, see PDF in documents
MICRO MOTOROLA New Panda 1.2 16V IAW 5NF Read in Boot Mode, see PDF in documents
Panda 1.2 8V IAW 5NF Read in Boot Mode, see PDF in documents
Punto 1.2 8V IAW 59F
Stilo 1.6 16V IAW 5NF Read in Boot Mode, see PDF in documents

FIAT BOSCH_ME73H4 EURO 4 IBRIDA R/W Fiat Punto 1.2 Bosch ME7.3.1 Boot Mode, pin 20 to mass
Boot Mode Fiat Stilo 2.4 Bosch ME7.3.1
Lancia Y 1.2 Bosch ME7.3.1 Boot Mode, pin 20 to mass

FIAT BOSCH_ME7.2.1 EURO3 IBRIDA R/W Fiat Punto 1.2 ME7.2.1 Euro3 Boot Mode, pin 20 to mass
Boot Mode Lancia Y 1.2 ME7.2.1 Euro3 Boot Mode, pin 20 to mass

ALFA BOSCH_ME7.2.1 EURO 3 IBRIDA R/W Alfa 156 2.0 ME2.1 Boot Mode, pin 20 to mass
Boot Mode Alfa 166 2.5 V6 24V ME2.1 Boot Mode, pin 20 to mass
Alfa GTV 3.0 V6 24V ME2.1 Boot Mode, pin 20 to mass
Alfa Spider 3.0 V6 24V ME2.1 Boot Mode, pin 20 to mass
Fiat Bravo/a 2.0 ME2.1 Boot Mode, pin 20 to mass
Fiat Bravo/a 2.0 20V ME2.1 Boot Mode, pin 20 to mass
Fiat Coupe 2.0 20V ME2.1 Boot Mode, pin 20 to mass
Fiat Marea 2.4 MDI 20V ME2.1 Boot Mode, pin 20 to mass
Lancia Lybra 2.0 i 20V ME2.1 Boot Mode, pin 20 to mass

ALFA BOSCH_ME7.3.1HA EURO

Package included:

1 pc x Galletto 1260 cable

1 pc Driver CD

FAQ:

Q: what is the difference between DigiProg OBD and Galletto 1260?

A: They are both ECU Chip Tuning machine,but they compatible with different cars.

ECU Tuning DigiProg OBD ECU-Flasher

ECU Tuning EOBD2 Galletto 1260 FLASHER

Our Price:
US$29.98

ELM327 is the latest PC-based scan tool. It supports all OBD-II protocols and is dispatched with a number of compatible programs. The processor is an ELM327. The output protocol (connection to laptop) is USB.

Processor: ELM327.

OBD-II Software for ELM327 is a free program that allows you to use your PC and a hardware interface to get the information from your car's computer.

The program is very user-friendly, and easy to learn. It is also very easy to install:

simply extract the files into a folder on your computer's hard drive, and you're ready to go. To uninstall the program, simply delete the entire contents of the folder where the program resides.

The software supports two platforms - DOS and Windows.



OBD-II Protocols:

- ISO15765-4 (CAN)

- ISO14230-4 (KWP2000)

- ISO9141-2

- J1850 VPW

- J1850 PWM



Output protocol: RS232

Baud rate: 9600 or 38400

Indicator LEDs: OBD Tx/Rx, RS232 Tx/Rx, Power

Operating voltage: 12V, internal protection from short circuits/overvoltages

Nominal idle current: 45 mA



Features:

The program lets you perform the following operations:

Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).

Clear trouble codes and turn off the MIL ("Check Engine" light)



Display current sensor data, including:

- Engine RPM

- Calculated Load Value

- Coolant Temperature

- Fuel System Status

- Vehicle Speed

- Short Term Fuel Trim

- Long Term Fuel Trim

- Intake Manifold Pressure

- Timing Advance

- Intake Air Temperature

- Air Flow Rate

- Absolute Throttle Position

- Oxygen sensor voltages/associated short term fuel trims

- Fuel System status

- Fuel Pressure

- Many others...



Upcoming Features:

- Data graphing and logging

- Freeze Frame data

- Continuous and Non-Continuous Oxygen Sensor test results



Free software:

Scantool.net

- GM Mode 22 Scan Tool by Terry

- OBD Gauge for PalmOS and Pocket PC by Dana Peters

- OBD Logger by Jonathan Senkerik

- OBD-II ScanMaster by Wladimir Gurskij (ScanMaster 3.52 - local copy)

- obd2crazy.com

- OBD2 Scantool by Ivan Andrewjeski

- OBDII for ELM322 by David Huffman

- pyOBD by Donour Sizemore for MacOSX and Linux

- RDDTC by Pete Calinski

- Real Scan by Brent Harris

- ScanTest for Pocket PC by Ivan Ganev aka a-ser

- wOBD by WDT



Aavailable cars:

Benz 2001/02/03 W203 C200K (ISO)

BMW X5 2002 (ISO) Chevrolet Aveo (ISO)

Citroen C3 2004 (ISO) ? Daihatsu YRV 2005 (ISO)

Daihatsu YRV Turbo 2006 (ISO)

Fiat Tipo 2002 (ISO)

Ford New?ocus 2006(CAN)



Honda Accord 2006 JDM (ISO)

Honda Accord Euro R 2004 JDM (ISO)

Honda City GD8 (ISO)

Honda Civic ES 1.6A (ISO)

Honda Integra Type R DC5 JDM (ISO)

Honda Jazz 1.4M (ISO)



Hyundai Accent 2004 (ISO)

Hyundai Getz 1.3A 2004 (ISO)

Hyundai Getz 1.6M 2004 (ISO)

Hyundai Matrix 2004 (ISO)

Hyundai Santa Fe 2.4A (ISO)

Hyundai Sonata GLS (ISO)

Hyundai Sonata 2005 (ISO)

Hyundai Tuscani FX (ISO)

Kia Carens 2005 (ISO)

Kia Magentis 2005 (ISO)

Kia Rio LS (ISO)

Kia Sorento SUV 2005 (ISO)

Lexus es300 Mazda 2 (CAN)

Mazda 5 (CAN)

Mazda 6 (CAN)

Mazda Premacy 2001 (ISO)

Mazda RX8 (CAN)

Mitsubishi Colt 2003 (ISO)

Mitsubishi Colt Plus 2005 (ISO)

Mitsubishi Eclipse(GST-----Turbo Car can be tested for the year 1995-2000 ；RS/GS----1994-1996 GS all can do；Turbo Car for the year 1996-2000,only have speed and TPS，can clear the DTCS)

Mitsubishi Lancer Evolution IX 2006 (ISO)

Mitsubishi Pajero 3.5 V6 2006 (ISO)

Nissan Sunny B14 (ISO)

Nissan Sunny VIP FB15 (ISO)

Nissan X-Trail 2.0L 2004 (ISO)

Nissan X-Trail 2.5L 2004 (ISO)

Peugeot 206 2001 –Only can show RPM

Peugeot 206 (ISO)

Peugeot 307 (ISO)

Peugeot 407 (ISO)

Renault Megane II 2005 (ISO)

Renault Kangoo 2006 (ISO)

Subaru Impreza 1.6TS 2002 (ISO)

Subaru Impreza WRX 2005 (ISO)

Toyota Camry 2.0A 2004 (ISO)

Toyota Camry 2.4A 2005 (ISO)

Toyota Corolla Altis 1.6A 2005 (ISO)

Toyota Corolla GLXi G8 1999 (ISO)

Toyota Corolla G9 2002 (ISO)

Toyota Vios 2004 (ISO)



Not available veichles:

Mazda 323 Protege 2003 (OBD-I)

Mitsubishi Lancer 1.6M 2006

Nissan Sunny (N16)

Nissan Cefiro (Teana) 2005

Nissan sentra 1.8 2000/2005

Nissan Cefiro (Teana) 2005

Proton Perdana V6

Subaru Legacy GT 2005

Toyota camry 2002

Toyota Wish JDM (Missing Pin 5 in DLC)

Toyota IST JDM (Missing Pin 5 in DLC)

Toyota altis 1.8 2004

Peugeot 206 2000

Suzuki Jimny 1.3 2000

Diesel engine



Package includes：

One elm327 USB interface

One CD software

FAQ: What is the difference of V.15 ELM327, Plastic ELM327 and Bluetooth ELM327?

There have the same functions. The only difference is the interface:-

The V1.5 ELM327 has both usb and com interface,

The Plastic ELM327 has usb interface only,

The Bluetooth ELM327 has no cable, it works via bluetooth wirelessly.

ELM327 USB Scanner Tool CAN-BUS OBD II (Plastic)

ELM327 V1.5 USB COM OBD2 CAN-BUS Scanner

ELM327 Bluetooth Scanner Tool CAN-BUS OBD II (Wireless Bluetooth)

VCDS VAG COM VAGCOM 912 HEX CAN USB

Read before you order:

• 1. VAGCOM 912 has the same function as VAGCOM 908, it just support more car models than vagcom 908, not other updates.
• 2. Almost VW, AUDI cars before 2010 year are supported! We can NOT guarantee on all 2010 year cars. And we can NOT 100% guarantee it supports your car, as we can not test every models. Consider before you order it, we can NOT offer you a correct support car list now.
• 3. We only have English version software. We only guarantee it works well on Windows XP. Please use the software provide by our disk only, do NOT use original software which will disable the cable.
• 4. Our vagcom cables can only read and erase error codes, can NOT programming or make parameter adaptions
  

Install tips: -
1. Make sure that software and drivers are installed correctly from the supplied disc.
2. Connected cable to computer, but NOT connect to car, make sure you see [picture 1] as showed below.
3. Run the software, in the option menu press test and save.
4. Close the VCDS software and connect to car., put the ignition key on, without starting engine.
5. Start VCDS software and make the test again.
6. Enjoy it.

If occur error while test, like "interface not found", no response, please try following changes: -
7. Change system time befor November of 2008, for example 20/10/2008
8. Change computer for test.

If unfortunatley all tries are fail, please contact us for help. Please tell us which steps you failed, and capture a screen shot for us. Don't worry, we are here to help you.

[picture 1]

Our software only works well with 32bit Windows XP. Windows Vista or Windows 7, 64bit computer may not support well. (though some customer has success install the cable on Vista and work well(specify the USB driver manually), but we can not guarantee)

Please do NOT use original software of 912. It will disable the cable! Only use the software we provide.

Por favor no utilice el software original de 912. Se deshabilita el cable! Sólo el uso del software que ofrecemos.

Prega di non utilizzare software originale di 912. Esso consente di disattivare la cavo! Utilizzare solo il software che offriamo.

S'il vous plaît n'utilisez pas le logiciel original de 912. Il désactivera le câble! Utilisez uniquement les logiciels que nous fournissons.

Bitte nutzen Sie die Original-Software von 912. Es wird deaktivieren Sie die Kabel! Verwenden Sie nur die Software, die wir liefern.

Beta versions contain new features and functions that have not yet been as fully tested as have Release versions. If you use a Beta, you may find bugs or problems and you are expected to report them to us so that we can fix them before making a new Release. Please be sure that you have also installed the latest version on your computer as well so that you can revert back to using that if you encounter problems with the Beta.

Beta 912.0 includes the following new features and improvements:

Basic Settings for latest Control Modules using UDS/ODX/ASAM protocols.
As is the case for other functions under UDS, there are no longer any channel or group numbers. Instead, the Basic Setting to be performed must be selected from a drop-down list:

On UDS control modules which offer "Instructions", VCDS will automatically display them:

In addition, UDS Measuring Values can be displayed simultaneously:

Added ability to view Measuring Values during UDS Output Tests. This can be handy to verify that certain outputs are functioning as intended:

Improved Readiness screen, now shows name of script in title bar and under [Set Readiness] button, or gives a reason why [Set Readiness] is disabled when that is the case:

Support for new and revised models such as the face-lifted 2010 T5 van.

New, revised and expanded ODX/ASAM data set, supporting Basic Settings function and additional new control modules under UDS.

Works only with Intelligent Interfaces (HEX, KEY and Micro-CAN).

Works on Windows 2000, XP, Vista and 7. Windows 95, 98 and ME are no longer supported.


Keywords:

VCDS V912, vag com912, BETA V912, VAG 912, vag 912, vag com 912, vag com 912, vag-com, vag com, vag V912, vag v912, vag com v912, vag com v912

Features

Working with a computer, this item performs the functions of a factory VAG-1551 or VAG-1552 scan tool and more. This item is fully compatible with almost all VW/AUDI/SEAT/SKODA vehicles, including KKL and CAN-BUS.

Functions

Full support for control modules using the new "Service 22" identification methods.
Support for control modules using the new UDS/ODX/ASAM protocol.
The following functions are supported:
Control Module ID (including Advanced ID), Coding, Security Access, and Fault Codes.
New Session Log capabilities.
Support for Generic OBD-II Mode 10.
Support for vehicles with dual ECUs, or example the RS4 and W12 engines.
Both ECUs are accessible simultaneously via address 31 for Basic Settings such as TBA.
Revised Adaptation screen to support the much longer Long Adaptations now appearing in some control modules.
Revised Advanced ID screen for increased flexibility handling the various data items appearing in the latest control modules.
New internal Gateway Coding Assistant (required for Audi B8 platform cars).
Much improved documentation (Label Files) for many older cars
Module Version - identify the control module part number and coding version
DTC Memory - read and clear manufacturer diagnostic trouble codes
Actual Values - access live data
Activation - selected components can be activated
Code Module - code new control modules (most models through 2002)
Adaptation - read/reset Service Light parameters, view/change block learn values
Basic Settings - view and change control module default settings (Excluding 1.8T 01 and newer)
Individual Values - read individual measuring values
Readiness Code - Check status of applicable emissions related systems
Remote Control Programming - program Radio Frequency keys
Key Matching - match keys to Immobilizer control module (5 digit)

Workable Models

All VW, AUDI, SEAT, and SKODA vehicles, includes those with CAN-BUS system.

What can this interface be used for?

This interface (adapter) is used as an interface and a USB cable to connect a VW/AUDI vehicle to a PC with USB port for on-board diagnostics (OBD).

Specifications

OBDII Plug: J1962 16-Pin Male (to Car)
Connection Port: USB port
Length: 1.8 meters
Weight: About 150g
Color: Black
Powered from car battery over OBD2 connector

OBD2 ELM327 Bluetooth CAN-BUS Scanner Tool

Newly developed bluetooth ELM327,support all OBD-II protocols as follows:
ISO15765-4 (CAN);
ISO14230-4 (KWP2000)
ISO9141-2
J1850 VPW
J1850 PWM

Function:
1.Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).
2.Clear trouble codes and turn off the MIL ("Check Engine" light)
3.Display current sensor data, including:
4.Engine RPM
5.Calculated Load Value
6.Coolant Temperature
7.Fuel System Status
8.Vehicle Speed
9.Short Term Fuel Trim
10.Long Term Fuel Trim
11.Intake Manifold Pressure
12.Timing Advance
13. Intake Air Temperature
14.Air Flow Rate
15.Absolute Throttle Position
16.Oxygen sensor voltages/associated short term fuel trims
17. Fuel System status
18.Fuel Pressure

Compatible vehicles:

Benz 2001/02/03 W203 C200K (ISO)

BMW X5 2002 (ISO) Chevrolet Aveo (ISO)

Citroen C3 2004 (ISO) ? Daihatsu YRV 2005 (ISO)

Daihatsu YRV Turbo 2006 (ISO)

Fiat Tipo 2002 (ISO)

Ford New?ocus 2006(CAN)

Honda Accord 2006 JDM (ISO)

Honda Accord Euro R 2004 JDM (ISO)

Honda City GD8 (ISO)

Honda Civic ES 1.6A (ISO)

Honda Integra Type R DC5 JDM (ISO)

Honda Jazz 1.4M (ISO)

Hyundai Accent 2004 (ISO)

Hyundai Getz 1.3A 2004 (ISO)

Hyundai Getz 1.6M 2004 (ISO)

Hyundai Matrix 2004 (ISO)

Hyundai Santa Fe 2.4A (ISO)

Hyundai Sonata GLS (ISO)

Hyundai Sonata 2005 (ISO)

Hyundai Tuscani FX (ISO)

Kia Carens 2005 (ISO)

Kia Magentis 2005 (ISO)

Kia Rio LS (ISO)

Kia Sorento SUV 2005 (ISO)

Lexus es300 Mazda 2 (CAN)

Mazda 5 (CAN)

Mazda 6 (CAN)

Mazda Premacy 2001 (ISO)

Mazda RX8 (CAN)

Mitsubishi Colt 2003 (ISO)

Mitsubishi Colt Plus 2005 (ISO)

Mitsubishi Eclipse(GST-----Turbo Car can be tested for the year 1995-2000 ；RS/GS----1994-1996 GS all can do；Turbo Car for the year 1996-2000,only have speed and TPS，can clear the DTCS)

Mitsubishi Lancer Evolution IX 2006 (ISO)

Mitsubishi Pajero 3.5 V6 2006 (ISO)

Nissan Sunny B14 (ISO)

Nissan Sunny VIP FB15 (ISO)

Nissan X-Trail 2.0L 2004 (ISO)

Nissan X-Trail 2.5L 2004 (ISO)

Peugeot 206 2001 –Only can show RPM

Peugeot 206 (ISO)

Peugeot 307 (ISO)

Peugeot 407 (ISO)

Renault Megane II 2005 (ISO)

Renault Kangoo 2006 (ISO)

Subaru Impreza 1.6TS 2002 (ISO)

Subaru Impreza WRX 2005 (ISO)

Toyota Camry 2.0A 2004 (ISO)

Toyota Camry 2.4A 2005 (ISO)

Toyota Corolla Altis 1.6A 2005 (ISO)

Toyota Corolla GLXi G8 1999 (ISO)

Toyota Corolla G9 2002 (ISO)

Toyota Vios 2004 (ISO)

Not available veichles:

Mazda 323 Protege 2003 (OBD-I)

Mitsubishi Lancer 1.6M 2006

Nissan Sunny (N16)

Nissan Cefiro (Teana) 2005

Nissan sentra 1.8 2000/2005

Nissan Cefiro (Teana) 2005

Proton Perdana V6

Subaru Legacy GT 2005

Toyota camry 2002

Toyota Wish JDM (Missing Pin 5 in DLC)

Toyota IST JDM (Missing Pin 5 in DLC)

Toyota altis 1.8 2004

Peugeot 206 2000

Suzuki Jimny 1.3 2000

Diesel engine

What is included in package:
1pc x ELM327 unit(bluetooth version)
1pc x CD drive

FAQ: What is the difference of V.15 ELM327, Plastic ELM327 and Bluetooth ELM327?

There have the same functions. The only difference is the interface:-

The V1.5 ELM327 has both usb and com interface,

The Plastic ELM327 has usb interface only,

The Bluetooth ELM327 has no cable, it works via bluetooth wirelessly.

ELM327 USB Scanner Tool CAN-BUS OBD II (Plastic)

ELM327 V1.5 USB COM OBD2 CAN-BUS Scanner

Our Price:
US$29.98

ELM327 Bluetooth Scanner Tool CAN-BUS OBD II (Wireless Bluetooth)

OBD2 ELM327 Bluetooth CAN-BUS Scanner Tool

Newly developed bluetooth ELM327,support all OBD-II protocols as follows:
ISO15765-4 (CAN);
ISO14230-4 (KWP2000)
ISO9141-2
J1850 VPW
J1850 PWM

Function:
1.Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).
2.Clear trouble codes and turn off the MIL ("Check Engine" light)
3.Display current sensor data, including:
4.Engine RPM
5.Calculated Load Value
6.Coolant Temperature
7.Fuel System Status
8.Vehicle Speed
9.Short Term Fuel Trim
10.Long Term Fuel Trim
11.Intake Manifold Pressure
12.Timing Advance
13. Intake Air Temperature
14.Air Flow Rate
15.Absolute Throttle Position
16.Oxygen sensor voltages/associated short term fuel trims
17. Fuel System status
18.Fuel Pressure

Compatible vehicles:

Benz 2001/02/03 W203 C200K (ISO)

BMW X5 2002 (ISO) Chevrolet Aveo (ISO)

Citroen C3 2004 (ISO) ? Daihatsu YRV 2005 (ISO)

Daihatsu YRV Turbo 2006 (ISO)

Fiat Tipo 2002 (ISO)

Ford New?ocus 2006(CAN)

Honda Accord 2006 JDM (ISO)

Honda Accord Euro R 2004 JDM (ISO)

Honda City GD8 (ISO)

Honda Civic ES 1.6A (ISO)

Honda Integra Type R DC5 JDM (ISO)

Honda Jazz 1.4M (ISO)

Hyundai Accent 2004 (ISO)

Hyundai Getz 1.3A 2004 (ISO)

Hyundai Getz 1.6M 2004 (ISO)

Hyundai Matrix 2004 (ISO)

Hyundai Santa Fe 2.4A (ISO)

Hyundai Sonata GLS (ISO)

Hyundai Sonata 2005 (ISO)

Hyundai Tuscani FX (ISO)

Kia Carens 2005 (ISO)

Kia Magentis 2005 (ISO)

Kia Rio LS (ISO)

Kia Sorento SUV 2005 (ISO)

Lexus es300 Mazda 2 (CAN)

Mazda 5 (CAN)

Mazda 6 (CAN)

Mazda Premacy 2001 (ISO)

Mazda RX8 (CAN)

Mitsubishi Colt 2003 (ISO)

Mitsubishi Colt Plus 2005 (ISO)

Mitsubishi Eclipse(GST-----Turbo Car can be tested for the year 1995-2000 ；RS/GS----1994-1996 GS all can do；Turbo Car for the year 1996-2000,only have speed and TPS，can clear the DTCS)

Mitsubishi Lancer Evolution IX 2006 (ISO)

Mitsubishi Pajero 3.5 V6 2006 (ISO)

Nissan Sunny B14 (ISO)

Nissan Sunny VIP FB15 (ISO)

Nissan X-Trail 2.0L 2004 (ISO)

Nissan X-Trail 2.5L 2004 (ISO)

Peugeot 206 2001 –Only can show RPM

Peugeot 206 (ISO)

Peugeot 307 (ISO)

Peugeot 407 (ISO)

Renault Megane II 2005 (ISO)

Renault Kangoo 2006 (ISO)

Subaru Impreza 1.6TS 2002 (ISO)

Subaru Impreza WRX 2005 (ISO)

Toyota Camry 2.0A 2004 (ISO)

Toyota Camry 2.4A 2005 (ISO)

Toyota Corolla Altis 1.6A 2005 (ISO)

Toyota Corolla GLXi G8 1999 (ISO)

Toyota Corolla G9 2002 (ISO)

Toyota Vios 2004 (ISO)

Not available veichles:

Mazda 323 Protege 2003 (OBD-I)

Mitsubishi Lancer 1.6M 2006

Nissan Sunny (N16)

Nissan Cefiro (Teana) 2005

Nissan sentra 1.8 2000/2005

Nissan Cefiro (Teana) 2005

Proton Perdana V6

Subaru Legacy GT 2005

Toyota camry 2002

Toyota Wish JDM (Missing Pin 5 in DLC)

Toyota IST JDM (Missing Pin 5 in DLC)

Toyota altis 1.8 2004

Peugeot 206 2000

Suzuki Jimny 1.3 2000

Diesel engine

What is included in package:
1pc x ELM327 unit(bluetooth version)
1pc x CD drive

FAQ: What is the difference of V.15 ELM327, Plastic ELM327 and Bluetooth ELM327?

There have the same functions. The only difference is the interface:-

The V1.5 ELM327 has both usb and com interface,

The Plastic ELM327 has usb interface only,

The Bluetooth ELM327 has no cable, it works via bluetooth wirelessly.

ELM327 USB Scanner Tool CAN-BUS OBD II (Plastic)

ELM327 V1.5 USB COM OBD2 CAN-BUS Scanner

Our Price:
US$29.98

ELM327 Bluetooth Scanner Tool CAN-BUS OBD II (Wireless Bluetooth)

VAG CAN Commander 5.1

Compatible with certain models of VW, Audi, Seat, and Skoda
Connect your computer to your car
USB to OBDII - CANBUS connection
Displays live data from your vehicle
Displays diagnostic trouble codes (DTCs) and definitions on screen
Reads and clears all generic DTCs and some manufacturer specific DTCs
Read security access code of immobilizer, eeprom and flash memory of instrument cluster
Plug and play: No need for additional batteries, cables, connectors, or converters

Diagnostics Vehicle Types Including++:

- 2003+ VW Touran (1T chassis)
- 2004+ VW Golf (1K chassis)
- 2004+ VW Caddy (2K chassis)
- 2004+ Audi A3 (8P chassis)
- 2004+ Seat Altea (5P chassis) and Altea XL
- 2004+ Skoda Octavia (1Z chassis)
- 2005+ Seat Toledo (5P chassis)
- 2005+ Golf Plus (5M chassis) - All Golf-5 platform cars (A5 platform)
- 2005+ Seat Leon (1P chassis)
- 2005+ Jetta (1K chassis)
- 2006+ Eos (1F chassis)
- 2003+ Audi A8 and A8L (D3 platform, 4E chassis)
- 2005+ Audi A6 (C6 platform, 4F chassis)
- 2005+ Audi A4 (B7 platform) (some control modules)
- 2005+ VW Passat (B6 Platform, 3C chassis)
- 2006+ Audi Q7 (4L chassis)
- 2007+ Audi R8 (42 chassis)
- 2007+ Audi TT (8J chassis)
- 2005+ Porsche Cayenne
- Skoda: Roomster, Scout

Operating Software Compatibility: Windows 98SE, ME, 2000, XP
OBDII Plug: 16-pin (Male)
USB: 2.0 and backward compatible
Dimensions: L:186cm

Package Contents

USB VAG Diagnostic Cable C 5.1 OBDII
CD with software

VAG CAN Commander 5.1

Compatible with certain models of VW, Audi, Seat, and Skoda
Connect your computer to your car
USB to OBDII - CANBUS connection
Displays live data from your vehicle
Displays diagnostic trouble codes (DTCs) and definitions on screen
Reads and clears all generic DTCs and some manufacturer specific DTCs
Read security access code of immobilizer, eeprom and flash memory of instrument cluster
Plug and play: No need for additional batteries, cables, connectors, or converters

Diagnostics Vehicle Types Including++:

- 2003+ VW Touran (1T chassis)
- 2004+ VW Golf (1K chassis)
- 2004+ VW Caddy (2K chassis)
- 2004+ Audi A3 (8P chassis)
- 2004+ Seat Altea (5P chassis) and Altea XL
- 2004+ Skoda Octavia (1Z chassis)
- 2005+ Seat Toledo (5P chassis)
- 2005+ Golf Plus (5M chassis) - All Golf-5 platform cars (A5 platform)
- 2005+ Seat Leon (1P chassis)
- 2005+ Jetta (1K chassis)
- 2006+ Eos (1F chassis)
- 2003+ Audi A8 and A8L (D3 platform, 4E chassis)
- 2005+ Audi A6 (C6 platform, 4F chassis)
- 2005+ Audi A4 (B7 platform) (some control modules)
- 2005+ VW Passat (B6 Platform, 3C chassis)
- 2006+ Audi Q7 (4L chassis)
- 2007+ Audi R8 (42 chassis)
- 2007+ Audi TT (8J chassis)
- 2005+ Porsche Cayenne
- Skoda: Roomster, Scout

Operating Software Compatibility: Windows 98SE, ME, 2000, XP
OBDII Plug: 16-pin (Male)
USB: 2.0 and backward compatible
Dimensions: L:186cm

Package Contents

USB VAG Diagnostic Cable C 5.1 OBDII
CD with software

Features
Working with a computer, this item performs the functions of a factory VAG-1551 or VAG-1552 scan tool and more. This item is fully compatible with almost all VW/AUDI/SEAT/SKODA vehicles, including KKL and CAN-BUS.

Functions
Module Version - identify the control module part number and coding version
DTC Memory - read and clear manufacturer diagnostic trouble codes
Actual Values - access live data
Activation - selected components can be activated
Code Module - code new control modules (most models through 2002)
Adaptation - read/reset Service Light parameters, view/change block learn values
Basic Settings - view and change control module default settings (Excluding 1.8T 01 and newer)
Individual Values - read individual measuring values
Readiness Code - Check status of applicable emissions related systems
Remote Control Programming - program Radio Frequency keys
Key Matching - match keys to Immobilizer control module (5 digit)

Workable Models

All VW, AUDI, SEAT, and SKODA vehicles, includes those with CAN-BUS system.

What can this interface be used for?
This interface (adapter) is used as an interface and a USB cable to connect a VW/AUDI vehicle to a PC with USB port for on-board diagnostics (OBD).

Specifications
OBDII Plug: J1962 16-Pin Male (to Car)
Connection Port: USB port
Length: 1.8 meters
Weight: About 150g
Color: Black
Powered from car battery over OBD2 connector

Car Diagnostics USB OBDII 409 Interface VAG-COM Cable

Description:

Primary Function: USB Vag-Com interface cable
OBDII Plug: J1962 16-Pin Male (to Car)
USB Port enabled
Operating Software Compatibility: Windows 98SE / ME / 2000 / NT and XP.
Supports terminal (K) bus communication
Terminal (L) ignition for waking up car computing system (ECU) engine control unit
Has 3 different protocols with same OBD2 connector including ISO/KWP, VPW, PMW.
Refer to your car user manual or check with your car dealer or local mechanic whether your car is compatible with this product.

Compatible Vehicles: Volkswagen, Audi, skoda, seat:

Audi Models:
- Compatible: A2 / A3 / A4 Cabriolet / A6 / A8 / S2 / S3 / TT
- Not Compatible: 80 / 100 / 200 / A3(8P) / A4(B7) / A6(C6/4F) / A8 / A8L(D3/4E) / Q7
SEAT Models:
- Compatible: Alhambra / Altea / Arosa / Cordoba / Ibiza / Inca / Leon MK 1 / Leon MK 2 / Toledo
- Not Compatible: Altea (5P) / Leon (1P) / Toledo (5P)
Skoda:
- Compatible: Fabia / Felicia / Octavia MK 1 / Octavia MK 2 / Superb
- Not Compatible: Octavia (1Z)
VW:
- Compatible: Beetle / Bora / Caddy / Corrado / Golf MK2 / Golf MK3 / Golf MK4 / Jetta MK3 / Jetta MK4/ Lupo / Passat MK3 / Passat MK4 / Polo MK3 / Polo MK4 / Touran / Touareg / Transporter T3 / Transporter T4 / Transporter T5.
- Not Compatible: Caddy (2K) / Golf MK5 (1K) / Golf Plus / Jetta MK5 (1K) / Passat MK5 (B6) / Passat MK6 (B6) / Phaeton /Touran (1T)

Dimension: L:154 (CM)
Manufacturer Ref: C44D47A6AF72
Catalog Ref: Car accessories, cable fault code, VAG-COM, OBD2 cable

Other Features

Also supports ISO9141 protocol
No DC or alternate power supply needed, just connect to your car and computer
Work with most Volkswagen and Audi models sold worldwide from 1994 to current year
The CVFG-A11 cable can not work if your car uses a protocol bus system like VPW, PWM or CAN -bus
The K/L Diagnostic interface cables works on ISO/KWP (Key Word Protocol) that were launched after 1996.

Package Including:

1pc x VAG COM 409.1 Cable
1pc x CD Drive

MCU controlled Interface for Mercedes Benz Carsoft 7.4 BRAND NEW.

YOU CAN READ/ERASE ALL FAULT CODES!!!!

READ ECU INFORMATION!!!!

YOU GET REPAIR INFORMATION AND FEATURES LIKE LIVE DATA AND CODING!!!! TOTAL AND SINGLE DIAGNOSIS - READ and ERASE FAULT CODES LIVE DATA (some ECUs only) - ECU INFO - REPAIR INFO - PRINT REPORT

Petrol Engines : ENGINE - TYPES until April 2004

Additional Features: - ME LIVE DATA, ME CODING, ME ADAPTATION Vehicle Types: - W124 / W202 / W140 / R129 / W210 / W208 / R170 / W209 / W203 / W163 / W168 / W220 / W215 / R230 / G461 / G463 / Vito / V-Class / Sprinter

Diesel Engines : ENGINE - TYPES until April 2004

Additional Features: - CDI LIVE DATA, CDI INJECTOR TEST Vehicle Types: - W124 / W202 / W140 / W210 / W208 / W203 / W163 / W168 / W220 / G461 / G463 / Vito / V-Class / Sprinter ABS - ASR - ETS - ESP - BRAKE Systems until April 2004 Additional Features: - ESP LIVE DATA, ABS ACTIVATION '95 onwards Vehicle Types: - W124 / W202 / W140 / R129 / W210 / W208 / R170 / W211 / W209 / W203 / W163 / W168 / W220 / W215 / R230 / G461 / G463 / Vito / V-Class / Sprinter SBC - SENSITIVE BRAKE CONTROL Systems till April 2004

Additional Features: LIVE DATA , DE-ACTIVATION & ACTIVATION OF THE BRAKES

Vehicle Types: W211 / R230 AIRBAG - AIRBAG Systems until April 2004

Additional Features:

ECU CODING

Vehicle Types : - W124 / W202 / W140 / R129 / W210 / W208 / R170 / W203 / W163 / W168 / W220 / W215 / R230 / G461 / G463 / Vito / V-Class / Sprinter KI - INSTRUMENT CLUSTERS until April 2004

Vehicle Types: - W202 / W140 / R129 / W210 / W208 / R170 / W209 / W203 / W163 / W168 / W220 / W215 / R230 / G461 / G463 / Vito / V-Class / Sprinter BAS - BRAKE ASSISTANCE Systems until April 2004

Vehicle Types : - W202 / W210 / R129 / W140 / W208 / R170 / W211 / W209 / W203 / W163 / W168 / W220 / W215 / R230 / G461 / G463 / Vito / V-Class / Sprinter EGS - GEARBOX Systems until April 2004

Additional Features: - LIVE DATA . ADAPTATION Vehicle Types: - W124 / W202 / W140 / R129 / W210 / W208 / R170 / W211 / W209 / W203 / W163 / W168 / W220 / W215 / R230 / G461 / G463 KG - KEYLESS GO Systems until April 2004

Vehicle Types: - W220 / W215 / R230 ASSYST - SERVICE INTERVAL Systems until April 2004 Additional Features: - SERVICE RESET, SERVICE

PROGRAMMING

Vehicle Types: - W202 / W140 / R129 / W210 / W208 / R170 / W203 / W163 / W168 / W220 / W215 / R230 / G461 / G463 / Vito / V-Class / Sprinter AIRCONDITIONING - AIRCO Systems until April 2004 Additional Features: - LIVE DATA INFO (Guidance to Display A/C Live Data on vehicle display)

Vehicle Types: - W124 / W202 / W140 / R129 / W210 / W208 / R170 / W209 / W203 / W163 / W168 / W220 / W215 / R230 / G461 / G463 / Vito/ V-Class / Sprinter AIRMATIC - AIR SUSPENSION Systems until April 2004 Additional Features: - LIVE DATA , ACTIVATION

Vehicle Types: - W220 / W215 ABC - ACTIVE BODYCONTROL Systems until April 2004

Vehicle Types: - W220 / W215 / R230 PSE - PNEUMATIC Systems until April 2004

Vehicle Types: - W124 / W202 / W140 / R129 / W210 / W208 / R170 / W220 / W215 / R230 / G461 / G463 PTS - PARKTRONIC Systems until April 2004 Additional Features: - LIVE DATA

Vehicle Types: - W202 / W140 / R129 / W210 / W208 / R170 / W209 / W203 / W163 / W220 / W215 / R230 / G461 / G463 AAM - ALL ACTIVITY Systems until April 2004 Additional Features: - ECU CODING

Vehicle Types: - W163 EAM - EXTENDED ACTIVITY Systems until April 2004 Additional Features: - ECU CODING

Vehicle Types: - W163 D2B - COMMAND Systems until April 2004 Additional Features: - ECU CODING

Vehicle Types: - W202 / W140 / R129 / W210 / W208 / R170 / W209 / W203 / W163 / W168 / W220 / W215 / R230 / G461 / G463 ATA / DAS - ANTI THEFT ALARM Systems until April 2004

Vehicle Types: - W124 / W202 / W140 / R129 / W210 / W208 / R170 / W209 / W203 / W163 / W168 / W220 / W215 / R230 / G461 / G463 EIS - ELECTRONIC IGNITION Systems until April 2004

Vehicle Types: - W124 / W202 / W140 / R129 / W210 / W208 / W209 / W203 / W220 / W215 / R230 / G461 / G463 UCP - UPPER CONTROL PANEL Systems until April 2004

Vehicle Types: - W209 / W203 / W220 / W215 LCP - LOWER CONTROL PANEL Systems until April 2004

Vehicle Types: - W210 / W208 / R230 OCP - OVERHEAD CONTROL PANEL Systems till April 2004

Vehicle Types: - W210 / W208 / W209 / W203 / W220 / W215 / R230 HRA - XENON LIGHT Systems until April 2004 Additional Features: - LIVE DATA , ACTIVATION

Vehicle Types: - W140 / R129 / W210 / W208 / R170 / W209 / W203 / W163 / W168 / W220 / W215 / R230 / G461 / G463 RVS / VD - CONVERTIBLE TOP Systems till April 2004

Vehicle Types: - R170 / R230 SAM - SIGNAL ACQUISITION Systems until April 2004

Vehicle Types: - W202 / W210 / W208 / W209 / W203 / W220 / W215 / R230 DCM - DOOR CONTROL Systems until April 2004

Vehicle Types: - W202 / W210 / W208 / W209 / W203 / W220 / W215 / R230 ESA - ELECTRICAL SEAT Systems until April 2004

Vehicle Types: - W202 / W210 / W208 / W209 / W203 / W220 / W215 / R23 FOR ALL MERCEDES MODELS UP TO 2004

Package Contains:

MB Carsoft 7.4 Interface OBD2
Connection cable MB 38 pin connection
Cable MB 3 pin
Banana cable
RS232 extension cable

FAQ

1. What can I do with this tool?
A: You can read or erase all fault codes with this tool.

Alldata 10.10: Full complect on HDD DL

Automotive repair shops that use the ALLDATA system have a clear differentiation from other repair facilities. ALLDATA-equipped shops can provide their customers with the most accurate repair estimates and proof of diagnostic and repair procedures. ALLDATA also includes factory-correct maintenance schedules that itemize additionally needed services. Moreover, ALLDATA helps shops build consumer confidence and loyalty.

Professional repair shops need current, factory-correct information to meet the complex repair demands of today's automotive industry. ALLDATA shops have fast access to the industry's best information for vehicles from 1982 to present including TSBs, maintenance schedules, manufacturer recall information, OE solutions, and factory images and diagrams.

ALLDATA HDD, the leading computer-based diagnostic, repair and estimating information system, can help you boost shop performance and build customer loyalty as you efficiently repair more makes and reduce comebacks.

The most comprehensive information for 1982 to present vehicles

OEM images, diagrams and diagnostic flow charts

Parts and labor information

Maintenance schedules

Manufacturer TSBs and Recalls

Integrated estimating software

OEM wiring diagrams with connector, ground, power distribution and splice information

A2Z Component Search - the fastest route available to component information

Whether you measure productivity by the number of vehicles repaired in a day, the variety of vehicles you're able to work on, or the time spent on diagnosis and repair, using the right information and shop management tools is vital to the success of your business. ALLDATA can help you succeed in every way

HDD list: -

GM 1-1
GM 1-2
GM 2-1
GM 2-2
GM 3
CHRYSLER 1-1
CHRYSLER 1-2
FORD 1-1
FORD 1-2
FORD 2
IMPORT 1-1
IMPORT 1-2
IMPORT 2-1
IMPORT 2-2
IMPORT 3-1
IMPORT 3-2
IMPORT 4-1
IMPORT 4-2
IMPORT 5-1
IMPORT 5-2
IMPORT 6-1
IMPORT 6-2
IMPORT 7-1
IMPORT 7-2
IMPORT 8-1
IMPORT 8-2

Installation Notes:

Run the setup to install the alldata.

The MaxScan VAG405 code scanner is an OEM level diagnostic scan tool for most VW/AUDIs sold worldwide since 1990 to present INC CAN BUS. Accurate, reliable and easy to use, It can access MOST modules, the MaxScan VAG405 is a time saver and a money maker!

It also doubles up as a Generic OBD2 fault code reader for most other manufacturers.. (Engine DTC Check)

Features & Benefit

1. Works with Volkswagen and Audi(Audi/Seat/Skoda/Jetta/Golf/Beetle/Touareg/GTI/ Passat and more) sold worldwide since 1990

2. Reads and erases Diagnostic Trouble Codes (DTCs) of most electronically controlled vehicle modules, including Engine, ABS, Airbags, Transmission, Radio, Climate Control(A/C), Cent.Elect. Steering Wheel, Instruments, Immobilizer, etc.

3. Reads and clears generic trouble codes of cars using ISO 9141-2 ("CARB"), ISO 14230 ("KWP-2000") and ISO-15765 ("CAN") protocols.

4. Turns off MIL lights of engine, airbags, ABS , A/T and most other systems

5. C.A.N.(Controller Area Network) Capability

6. Resets oil service light

7. Retrieves vehicle information (VIN)

8. Displays I/M Readiness Status.

9. Displays DTC definitions on Unit Screen

10. Highly reliable and accurate

11. Easy to use with friendly interface

12. Safely communicates with the on-board computers

13. Large, easy-to-read backlit LCD

14. Stand-alone unit with no need for an additional laptop computer to operate.

This Tool performs as a FULL diagnostic tool for VAG range and as a Generic Fault Code Reader for other Vehicles that are OBD2 complient..

Package Includes:

1pc x MaxScan VAG 405 HandHeld Scanner
1pc x 16 Pin OBD 2 Data Link cable
1pc x User Manual

Audi VW ACTIVATOR PORSCHE VAG K CAN COMMANDER 3.6

Odometer correct CAN based cars

VW Golf5
VW Jetta (MY2006)
VW Caddy
VW Crossgolf
VW Touaran
VW EOS
VW Individual
VW Passat platform B6 (MY2006)
Seat Toledo (CAN)
Seat Leon (CAN)
Seat Altea
Seat Altea XL
Skoda Octavia II
Skoda Scout
Audi A3
Audi A8
Audi A6
Audi Q7
Audi Allroad 2004+

Security code reading (CAN) / Read/Write EEPROM memory

VW Golf5
VW Jetta (MY2006)
VW Caddy
VW Crossgolf
VW Touaran
VW EOS
VW Individual
VW Passat platform B6 (MY2006)
Seat Toledo (CAN)
Seat Leon (CAN)
Seat Altea
Seat Altea XL
Skoda Octavia II
Skoda Scout
Audi A3
Audi A8 - R/W EEPROM
Audi Q7
Audi Allroad
Audi A6

K-line UPDATE - Odometer correct / Security code reading / Read/Write EEPROM

Audi A2 (K)
Audi A3 VDO/M73 up to 2003 (K)
Audi A4 VDO/M73 (K)
Audi A4 BOSCH (K) up to 2002
Audi A6 VDO (K)
Audi Allroad (K) up to 2004
Audi A8 up to Jan 1999
Audi TT (K)
Seat Alhambra (K)
Seat Arosa (K)
Seat Cordoba after 1999 (K)
Seat Ibiza VDO after 1999 (K) (MY2007 covered)
Seat Leon (K)
Seat Toledo (K)
Skoda Octavia (K)
Skoda Superb (K)
Skoda Roomster (K) (MY2007 covered)
Sko bia (K) (MY2007 covered)
VW Bora (K)
VW Beetle (K)
VW Golf4 VDO/Motometer/BOSCH (K)
VW Jetta (K)
VW Passat (K)
VW Polo VDO/Motometer (K) (MY2007 covered)
VW Sharan (K)
VW T4/T5 VDO (K) (MY2007 covered)

Read/Write EEPROM of Engine Control Units

BOSCH VAG-EDC15x, VAG-ME7.1.1, VAG-ME7.1, VAG-ME7.5, VAG-Cartronic ME7.8. (extracting security code, odometer correction, enable disable immobilizer and s.o.)
Porsche 911 (996/997), Porsche Boxter, Porsche Cayman, Porsche Cayenne - Read EEPROM via OBDII
BOSCH VAG-EDC15x, VAG-ME7.1.1, VAG-ME7.1, VAG-ME7.5, VAG-Cartronic ME7.8, MED9x - FSI, EDC16x - Read flashmemory by OBDII (near update programming of flash memories with function for resetting of reflashing counter)

Key learning function (without need of secutity access code/login)

Audi A2
Audi A3 VDO/M73 up to 2003
Audi A4 VDO/M73 up to 2000
Audi A4 after 2000 - petrol engines >= 1.8
Audi A6 VDO (K)
Audi A6 (CAN) petrol engines
Audi Allroad (K) up to 2004
Audi Allroad (CAN) petrol engines
Audi A8 up to 1998
Audi A8 from 2001 to 2002 2.5TDI
Audi A8 (CAN) 2003+ - first component protection generation
Audi TT (K)
Audi Q7 petrol engines
Seat Altea (CAN)
Seat Cordoba after 1999 (K)
Seat Ibiza (VDO) after 1999 (K)
Seat Leon (K+CAN)
Seat Toledo (K+CAN)
Skoda Octavia
Skoda Octavia II (CAN)
Skoda Superb
Skoda Roomster
Skoda Scout (CAN)
Sko bia
VW Phaeton petrol
VW Touareg petrol
VW Bora
VW Beetle
VW Caddy (CAN)
VW EOS (CAN)
VW Golf4 VDO/Motometer
VW Golf5 VDO
VW Crossgolf (CAN)
VW Individual (CAN)
VW Jetta (K+CAN)
VW Passat B5 (K) B6(CAN)
VW Polo5
VW Sharan after year 2000
VW T5
VW Touaran VDO (CAN)
Porsche Cayenne (K)

Key learning Cayenne (CAN)

VAG MMI TV Activation - A6,A8,Q7

Package Including:
1pc x VAG K+CAN Commander 3.0 Cable
1pc x CD Drive

OP-COM - PC based Opel diagnostic

VERSION：OPCOM 090420

OP-COM is a PC based diagnostic program.
( run on pc with Windows XP only. vista or win7 will destroy it.)

It covers almost all Opel cars, even new cars(cars manufactured in or before 2009) with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.
The program lets you to read out and clear fault codes, shows you live data, lets you to perform output test, and supports remote, and key programming.

The program supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit, just to name a few examples.

Since Opel uses many pin in the OBD connector, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication.

PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)
Fault codes will be shown with all available information:
Full fault code text description
Full status information (Present, Not present, Intermittent)

You can print out, save, or copy the fault codes to any other application. From the fault codes window, you can go directly to the measuring blocks window.

The program shows you measuring block information on many control module, you can choose anything from the list on your own.

The program is capable of showing 8 measuring block parameter simultaneously. The sample rate is depends mostly on the communication protocol. For example, older system, like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow, during communication, while newer Multec, or Bosch units are faster (using KWP-2000), and the newest CAN based control units are very fast!

You can also run output tests on many controllers.
PIN6-PIN14
PIN3-PIN11
PIN1
HSCAN - Dual-wire, High Speed CAN-BUS, 500 kbps
MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps
SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps

You will get a feedback on the state of the activated output. This will helps you to find the failed. Components more easily. With OP-COM, you can learn keys to immobiliser, and remote keys to the central door locking.

You can also reset, and program the following immobiliser related items: ECM, BCM, IPC.

You will need the vehicle security code, which can be found on the CAR-PASS.

You can also reset, and program the Service interval reminder on Astra-G, Zafira, Corsa-C, Meriva

You can code SAB6, and SAB8 airbags with the software.

The diagnostic inteface is USB port based, so there will be NO COMPATIBILITY ISSUES, with serial to USB converters.

The speed of the communication over the USB-BUS is enough to handle the awesome speed of the High-Speed CAN-BUS systems, which is currently 500kbps. This is the main reason, why only the USB port based interface is available for CAN-BUS.

Compared to the TECH2, which is the dealers tool (with a 32 MB Card+CANdi interface), the price of OP-COM is quite affordable.


Package Including: -
1.OP COM Interface
2.USB Cable
3.Software and Drivers CD

OP-COM - PC based Opel diagnostic

VERSION：OPCOM 090420

OP-COM is a PC based diagnostic program.
( run on pc with Windows XP only. vista or win7 will destroy it.)

It covers almost all Opel cars, even new cars(cars manufactured in or before 2009) with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.
The program lets you to read out and clear fault codes, shows you live data, lets you to perform output test, and supports remote, and key programming.

The program supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit, just to name a few examples.

Since Opel uses many pin in the OBD connector, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication.

PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)
Fault codes will be shown with all available information:
Full fault code text description
Full status information (Present, Not present, Intermittent)

You can print out, save, or copy the fault codes to any other application. From the fault codes window, you can go directly to the measuring blocks window.

The program shows you measuring block information on many control module, you can choose anything from the list on your own.

The program is capable of showing 8 measuring block parameter simultaneously. The sample rate is depends mostly on the communication protocol. For example, older system, like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow, during communication, while newer Multec, or Bosch units are faster (using KWP-2000), and the newest CAN based control units are very fast!

You can also run output tests on many controllers.
PIN6-PIN14
PIN3-PIN11
PIN1
HSCAN - Dual-wire, High Speed CAN-BUS, 500 kbps
MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps
SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps

You will get a feedback on the state of the activated output. This will helps you to find the failed. Components more easily. With OP-COM, you can learn keys to immobiliser, and remote keys to the central door locking.

You can also reset, and program the following immobiliser related items: ECM, BCM, IPC.

You will need the vehicle security code, which can be found on the CAR-PASS.

You can also reset, and program the Service interval reminder on Astra-G, Zafira, Corsa-C, Meriva

You can code SAB6, and SAB8 airbags with the software.

The diagnostic inteface is USB port based, so there will be NO COMPATIBILITY ISSUES, with serial to USB converters.

The speed of the communication over the USB-BUS is enough to handle the awesome speed of the High-Speed CAN-BUS systems, which is currently 500kbps. This is the main reason, why only the USB port based interface is available for CAN-BUS.

Compared to the TECH2, which is the dealers tool (with a 32 MB Card+CANdi interface), the price of OP-COM is quite affordable.


Package Including: -
1.OP COM Interface
2.USB Cable
3.Software and Drivers CD

Universal Dash Programmer Tacho Pro 2008 PLUS UNLOCK

Tacho Universal is the most sold programming-device for digital speedometers worldwide. The system is a high-quality tool, which offers a maximum of flexibility and working comfort despite simplest operation. You can serve almost any vehicle with the Tacho Universal.

Vehicles Supported

Click here for the supported vehicles.

Specification
Outstanding characteristics of our programming system are:

The current odometer reading is decoded and shown in the LCD display
Easy self explanitory operation by clear menu guidance
Backlit display makes working possible in overcast conditions
All datasets can be edited, saved and loaded
The stored data can be transferred to a PC for archiving
Up to 200 files can be stored in the Tacho Universal
Broken speedometers can be repaired comfortably

Package Included

item no. component number note
1 cable P607 for Tacho Universal 0676 OK
2 cable 11DU for Tacho Universal 0677 OK
3 Dongle CAN Hardware for Tacho Universal 0709 OK
4 Cable BMW OBD2+MB Service Reset for Tacho Universal 0742 OK
5 Cable ALFA156 for Tacho Universal 0678 OK
6 Cable ALFA145_146 for Tacho Universal 0679 OK
7 Cable P206 JAEGER for Tacho Universal 0684 OK
8 Cable ALFA166 for Tacho Universal 0681 OK
9 Cable P908 for Tacho Universal 0682 OK
10 Cable ACCORD for Tacho Universal 0683 OK
11 Cable P406 JAEGER for Tacho Universal 0680 OK
12 Cable MB-DiaMox for Tacho Universal 0685 OK
13 Cable GTV SPIDER for Tacho Universal 0686 OK
14 Cable MB SPRINTER Kienzle for Tacho Universal 0687 OK
15 Cable MB-OBD2 for Tacho Universal 0688 OK
16 Cable MB-CAN for Tacho Universal 0689 OK
17 Cable CRYSLER OBD2 for Tacho Universal 0743 OK
18 Cable Multi CAN for Tacho Universal 0690 OK
19 Cable P-106 for Tacho Universal 0691 OK
20 Cable SCOPRIO for Tacho Universal 0692 OK
21 Cable VW GOLF3+MB C-CLASS OLD for Tacho Universal 0744 OK
22 Cable SPRINT VDO for Tacho Universal 0693 OK
23 Cable VW CAN for Tacho Universal 0694 OK
24 Cable BMW HW 4,5,6 for Tacho Universal 0695 OK
25 Cable SHARAN 2000 for Tacho Universal 0696 OK
26 Cable AUDI 2000 for Tacho Universal 0697 OK
27 Cable OBD2 VW-OPEL for Tacho Universal 0698 OK
28 Cable POLO98/BELLTLE/B5 for Tacho Universal 0699 OK
29 Cable BMW DIAG for Tacho Universal 0700 OK
30 Cable BMW E36 for Tacho Universal 0701 OK
31 Cable BMW Z3/compact for Tacho Universal 0702 OK
32 Cable AUDI+VW OBD2+2 for Tacho Universal 0783 OK
33 DONGLE CRYSLER OBD2 for Tacho Universal 0703 OK
34 Dongle 912 for Tacho Universal 0704 OK
35 Cable 912 for Tacho Universal 0712 OK
37 NEC Dongle for Tacho Universal (9S12 DONGLE) 0732 OK
38 Adapter 93cx6 for Tacho Universal 0705 OK
39 Adapter 24COX for Tacho Universal 0706 OK
40 Adapter 35/95XXX for Tacho Universal 0707 OK
42 CLIP EEPROM DIP-8CON for Tacho Universal 0715 OK
43 CLIP EEPROM SOIC-14CON for Tacho Universal (5251) 0714 OK
44 CLIP EEPROM SOIC-8CON for Tacho Universal (5250) 0713 OK
45 Cable power supply for Tacho Universal 0711 OK
47 Tacho Universal hand-held device 0684 OK
48 BMW key Reader PRO 0675 OK
81 BMW CAS CABLE OK
82 GE Cherokee 4199 OK
83 Serial Communication Cable OK
84 USER MANUAL PDF DVD OK

Universal Dash Programmer Tacho Pro 2008 PLUS UNLOCK

Tacho Universal is the most sold programming-device for digital speedometers worldwide. The system is a high-quality tool, which offers a maximum of flexibility and working comfort despite simplest operation. You can serve almost any vehicle with the Tacho Universal.

Vehicles Supported

Click here for the supported vehicles.

Specification
Outstanding characteristics of our programming system are:

The current odometer reading is decoded and shown in the LCD display
Easy self explanitory operation by clear menu guidance
Backlit display makes working possible in overcast conditions
All datasets can be edited, saved and loaded
The stored data can be transferred to a PC for archiving
Up to 200 files can be stored in the Tacho Universal
Broken speedometers can be repaired comfortably

Package Included

item no. component number note
1 cable P607 for Tacho Universal 0676 OK
2 cable 11DU for Tacho Universal 0677 OK
3 Dongle CAN Hardware for Tacho Universal 0709 OK
4 Cable BMW OBD2+MB Service Reset for Tacho Universal 0742 OK
5 Cable ALFA156 for Tacho Universal 0678 OK
6 Cable ALFA145_146 for Tacho Universal 0679 OK
7 Cable P206 JAEGER for Tacho Universal 0684 OK
8 Cable ALFA166 for Tacho Universal 0681 OK
9 Cable P908 for Tacho Universal 0682 OK
10 Cable ACCORD for Tacho Universal 0683 OK
11 Cable P406 JAEGER for Tacho Universal 0680 OK
12 Cable MB-DiaMox for Tacho Universal 0685 OK
13 Cable GTV SPIDER for Tacho Universal 0686 OK
14 Cable MB SPRINTER Kienzle for Tacho Universal 0687 OK
15 Cable MB-OBD2 for Tacho Universal 0688 OK
16 Cable MB-CAN for Tacho Universal 0689 OK
17 Cable CRYSLER OBD2 for Tacho Universal 0743 OK
18 Cable Multi CAN for Tacho Universal 0690 OK
19 Cable P-106 for Tacho Universal 0691 OK
20 Cable SCOPRIO for Tacho Universal 0692 OK
21 Cable VW GOLF3+MB C-CLASS OLD for Tacho Universal 0744 OK
22 Cable SPRINT VDO for Tacho Universal 0693 OK
23 Cable VW CAN for Tacho Universal 0694 OK
24 Cable BMW HW 4,5,6 for Tacho Universal 0695 OK
25 Cable SHARAN 2000 for Tacho Universal 0696 OK
26 Cable AUDI 2000 for Tacho Universal 0697 OK
27 Cable OBD2 VW-OPEL for Tacho Universal 0698 OK
28 Cable POLO98/BELLTLE/B5 for Tacho Universal 0699 OK
29 Cable BMW DIAG for Tacho Universal 0700 OK
30 Cable BMW E36 for Tacho Universal 0701 OK
31 Cable BMW Z3/compact for Tacho Universal 0702 OK
32 Cable AUDI+VW OBD2+2 for Tacho Universal 0783 OK
33 DONGLE CRYSLER OBD2 for Tacho Universal 0703 OK
34 Dongle 912 for Tacho Universal 0704 OK
35 Cable 912 for Tacho Universal 0712 OK
37 NEC Dongle for Tacho Universal (9S12 DONGLE) 0732 OK
38 Adapter 93cx6 for Tacho Universal 0705 OK
39 Adapter 24COX for Tacho Universal 0706 OK
40 Adapter 35/95XXX for Tacho Universal 0707 OK
42 CLIP EEPROM DIP-8CON for Tacho Universal 0715 OK
43 CLIP EEPROM SOIC-14CON for Tacho Universal (5251) 0714 OK
44 CLIP EEPROM SOIC-8CON for Tacho Universal (5250) 0713 OK
45 Cable power supply for Tacho Universal 0711 OK
47 Tacho Universal hand-held device 0684 OK
48 BMW key Reader PRO 0675 OK
81 BMW CAS CABLE OK
82 GE Cherokee 4199 OK
83 Serial Communication Cable OK
84 USER MANUAL PDF DVD OK

Car Scan Tool Scanner Code Reader OVS6 specially for VW/Audi

Description:

The OVS6 code scanner is specially designed to work with most Volkswagen and Audis sold worldwide of 1990 or newer models.

If a VW/AUDI has a 16-pin ?BD-II style ?ata Link Connector (DTC),the code reader will certainly work.

If it has an old-style 2?Data link connector (DTC),then it depends on whether there are 4 or 3 wires connecting to the pins .If there are 4 wires , each connecting a pain ,then it will work .If there are only 3 wires ,leaving one pain disconnected ,then it will work.

For VW/AUDI with old-style 2?Data Link Connector (DTC),you need to have a 2? cabling adapter which is not included in this product package

Features:

A.Works with Volkswagen and Audi (Audi/ Seat/ Skoda/ Jetta/ Golf / Beetle/ Touareg/ GTI/ Passat and more) sold worldwide since 1990.

B.Reads and erases Diagnostic Trouble Codes (DTCs) of engine, ABS, airbags, transmission, radio, climate control(A/C), cent. elect., steering wheel, instruments, immobilizer, etc. (18 Systems)

C.Reads and clears generic trouble codes of cars using ISO 9141-2 ("CARB"), ISO 14230 ("KWP-2000") and ISO- 15765 ("CAN") protocols

D.Turns off MIL lights of engine, airbags, ABS , A/T and most other systems

E.C.A.N.(Controller Area Network) capability

F. Resets oil service light (depends on vehicle support)

G.???Retrieves vehicle information (VIN)

H.Displays I/M Readiness Status

I.Displays DTC definitions on unit screen

J.Highly reliable and accurate

K. Easy to use with friendly interface

L.Safely communicates with the on-board computers

M.Large, easy-to-read backlit LCD

N.System Upgradeable via internet

O.Stand-alone unit with no need for an additional laptop computer to operate



Surpport following protocols:

J1850 PWM
J1850 VPW
KPW 2000
ISO 14230-04
ISO 9141

Will It Work With My Car?

This reader works with the majority of OBD 2, EOBD and CAN-BUS vehicles manufactured worldwide including the following:

Acura Kia
Asuna Land Rover
Audi Lexus
Bentley Lincoln
Buick Mazda
Cadillac Mercury
Chevrolet Mini
Chevy Murkur
Chrysler Nissan
Citroen Oldsmobile
Daewoo Opel
Dodge Peugeot
Eagle Plymouth
Fiat Pontiac
Ford Porsch
Geo Renault
GM Rover
GMC Saab
Honda Saturn
Hummer Scion
Hyundai
Infinity
Isuzu
Jaguar
Jeep

Package include:

1pc x OVS6 Scanner
1pc x .Nylon Carry Case
1pc x OBD II Cable
1pc x User Manual(English)
1pc x CD (OBD2 DTCS)

LAUNCH OBD2 CODE READER CREADER V

CReaderV is newly developed by LAUNCH, specially designed for car owners or DIYs to diagnose any vehicle that is compliant to OBDII/EOBD. It not only can read/clear DTCs, but also can read live data in 2 modes, and perform many special tests. Tri-languages make it operation easily for a technician. The feature of upgrading online ensures it can test new model cars and/or functions in the future.

Specification:
Display: Backlit, 160 x 160 pixels
Operating Temperature: 0 to 60 degree (32 to 140 F)
Storage Temperature: -20 to 70 degree (-4 to 158 F)
Power: 8 to 18 Volts provided via DLC
Unit Dimensions: 126 mm x 8 mm x 2 mm(Length/width/thickness)
Test Cable length: 0.9m

Function:
1. Read Codes
2. Erase Codes
3. View Freeze Data
4. Data Stream:Entire Data list ,Custom Data list
5. Special Tests:I/M Readiness,MIL Status,O2 Sensor Test,On-board monitor test,EVAP system test,Vehicle Info
6. Code Lookup

Pakage includes:
1 creader v main unit

MVP Key Decoder Spanish 8.5V

MVP means Multi Vehicle Programmer, MVP is made by Advanced Diagnostics Limited, it is the update version of perfect product AD100.

The idea of MVP is: you only pay a little money and you can use the original full functions code read by installment plan. You can pay token when you make the key.

Covers all version functions of T300, AUTOMAM, K1, 2005, 2008, DECODER), and add more functions, such as the update 06-07 Honda system, Peugeot system and control, Hyundai system and control, the menu and control of Daewoo, Kia control, GM control and System update, Mitsubishi CAN BUS System, VW menu and control, CAN BUS Interface.

The function:
1. Read the default code of car
2. Cleanup all default code
3. Read the data of system
4. Read the IMMO/ECU ID code
5. Read the code of mechanical key
6. Cleanup the memory of car key
7. Programmer a new key
8. Read the enter code of car key
9. Discern the type of ECU
10. Programmer ECU-IMMOBILISER
11. Read the EKA code
12. Programmer the new EKA code
13. Programmer remote device
14. Matching the intelligent key
15. Matching the intelligent remote key

Added the model after update:
1. SAAB-Matching key of CAN BUS system
2. Honda (07 Civic)
3. Toyota/Lexus-CAN BUS system
4. Volvo-key matching
5. Mitsubishi-CAN BUS system
6. Hyundai/Kia-CAN BUS system
7. NISSAN-matching intelligent remote key
8. VAG read code function
9. ROVER-MG and so on.

Package Including:
MVP Hand Held tester x 1pc
9 inch main cable x 1pc
12V Power x 1pc
Honda adapter x 2pcs
Peugeot adapter x 2pcs
GM/Daewoo adapter x 1pcs
Mitsubishi adapter x 1pcs
Suzuki adapter x 1pcs
Nissan adapter x 2pcs
OBD-II adapter x 1pcs
CHRYSLER 138 adapter x1pc (newly added in Nov. 8th)
CHRYSLER 138 adapter x1pc (newly added in Nov. 8th)
Packing Case Included

FAQ: Frequently Asked Questions:
Q: How to know the MVP password?
A: The password is on the back of the MVP.When you received the product,please check the back,you will found the password.

Q: What is the version of MVP?
A: The spanish version is 8.5V,English version is 5.8V.

Q: SBB and MVP which is better?
A: SBB is a universal key program tool.It do not have lots of adapters, it is directly connect to the car's OBD 16Pin connector.Different from SBB,MVP have lots of adapters.Different demands will cause different choose,it depends on customer's needs.

Q: Can MVP do Chrysler cars?
A: Sorry, MVP can not do Chrysler cars.

MVP Key Decoder Spanish 8.5V

SBB Key Programmer IMMOBILISER

Professional OBD-II EOBD Code Reader Scanner tool English/Spanish

Display: 128x64 Pixel LCD

Functions:
Displays the DTC definitions
Reads and clears all generic, and some manufacturer, specific DTCs
Works with CAN-equipped vehicles
Resets check engine lights
Views OBD-II Freeze Frame data
Determines the Malfunction Indicator lamp (MIL) status
I/M readiness status
Retrieves the Vehicle Identification Number (VIN)
Scanning live data
Saves scanning Data (memory: 4MB)

Protocols:SAE-J1850 PWM, SAE-J1850 VPW, KWP2000(ISO-14230), ISO-9141, CAN BUS (ISO-15765-4), EOBD-II

Car Compatibility:U.S. - European - Japanese - Asian - German - Korean Models

Specific Model Compatibility:
Suitable for almost all cars after 2001 - 2006 (EOBD-II)
GM '96 - '2006 (OBD-II)
Ford '96 - '2006 (OBD-II)
Chrysler '96 - '2006 (OBD-II)
Toyota '96 - '2006 (OBD-II)
Honda '96 - '2006 (OBD-II)
NISSAN '96 - '2006 (OBD-II)
All other - Asian and European '96 - '2006 (OBD-II)

Power Source: provided by vehicle battery§
Dimension: 160x105x57mm (LxWxD) §

Other Features:
CD Manual with§ all codes explained
saves up to 38 scans for later viewing§
Screen§ contrast adjustment and backlight

Language: English/Spanish

Package includes:
Model CVELY-1019
Diagnostic Cable
CD with Manual§

FAQ:

Q: Does this product have spanish version?

A: yes, this product now have spanish/English version,Russia and Germany version need customized.

Q: Can this product be updated?

A: No,this item can not be updated.

White is a pure color. Simple and elegance. Many people with quality life love white color. take a look at the following White Netbook.

Highlight

D900 CANSCAN OBD2 Live PCM Data Code Reader Scanner

An essential piece of kit for all car and van owners save time and money with this hand held OBDII ScanTools which enables you to troubleshoot any problems in your vehicle by reading the Diagnostic Trouble Codes (DTC) that appear when the "check engine" light is showing.

DTCs are codes that are stored by the car's in-board computer system in response to a vehicle issue. Codes relate to a particular problem and are made up of a 5 digit alphanumeric sequence and are used as a guide to help locate the fault in order for you to fix the vehicle.

This scanner has CAN Protocol Support which gives wider vehicle coverage. It resets the check engine lights, reads and clears all generic, and some manufacturer specific, DTC, displays the I/M readiness status, views OBD II freeze frame data, displays pending codes, retrieves vehicle information (VIN), and determines the status of the malfunction indicator (MIL) lamp.

Help prevent costly future engine trouble and identify problems when buying or selling a used vehicle with the MULTOBD scan tool.

Features:

Display: backlight 128 x 64 pixel display with contrast adjustment

easy-to-read screen and also saves up to 15 scans for later viewing.

Operating temperature: 0-50 C (-32 to 122F)

External power: 8.0 to 15.0 volts provided by vehicle battery

Internal Power: 3 AAA battery (included)

Specifications:

Power: directly from the vehicle or by X3 AA batteries

Unit dimensions: 9 x 20 x 3cm / 3.3 x 8 x 1.2" (W x L x D)

Screen dimensions: 6 x4.5cm / 2.3 x 1.6" (W x L)

Cable length: 109cm /43"

Compatibility:

This is an OBDII and EOBD scanner which supports the following protocols:

CAN

KWP 2000

ISO 9141-2

PWM

VPW

The D900 CanScan is brand new and is supplied with: scanner unit OBD II connector cable, disc with comprehensive user manual, OBD information and compatibility list and padded storage case with wrist strap.

Supports ISO, VPW and PWM bus systems as well as can bus systems

U.S. Models - European - Japanese - Asian - German - Korean:

Suitable for almost all cars after 1996 .

GM '96 - Current Year (OBD-II)

Ford '96 - Current Year (OBD-II)

Chrysler '96 - Current Year (OBD-II)

Toyota '96 - Current Year (OBD-II)

Honda '96 - Current Year (OBD-II)

NISSAN '96 - Current Year (OBD-II)

All other - Asian and European '96 - Current Year (OBD-II)

Functions:

Displays the DTC definitions on screen unlike previous models

Wider coverage: works with CAN-equipped vehicles

Reads and clears all generic, and some manufacturer, specific DTCs

Resets check engine lights

Views OBD II Live data

Views OBD II freeze frame data

Displays I/M readiness status

Retrieves the Vehicle Identification Number (VIN)

Determines the malfunction indicator lamp (MIL) status

Hot keys for quick read and release

Hand held and easy to use with one plug-in only

Highly reliable and accurate

Safely communicates with the onboard computer

No batteries needed for operation powered via detachable OBD2 cable

Battery compartment for off-vehicle reviewing or for when upgrading from PC

Package contains:

Scanner with detachable OBD2 Extension Cable

Nylon carry pouch for transportation of the tool and it's accessories

CD-ROM that includes User Manual

D900 CANSCAN OBD2 Live PCM Data Code Reader Scanner

An essential piece of kit for all car and van owners save time and money with this hand held OBDII ScanTools which enables you to troubleshoot any problems in your vehicle by reading the Diagnostic Trouble Codes (DTC) that appear when the "check engine" light is showing.

DTCs are codes that are stored by the car's in-board computer system in response to a vehicle issue. Codes relate to a particular problem and are made up of a 5 digit alphanumeric sequence and are used as a guide to help locate the fault in order for you to fix the vehicle.

This scanner has CAN Protocol Support which gives wider vehicle coverage. It resets the check engine lights, reads and clears all generic, and some manufacturer specific, DTC, displays the I/M readiness status, views OBD II freeze frame data, displays pending codes, retrieves vehicle information (VIN), and determines the status of the malfunction indicator (MIL) lamp.

Help prevent costly future engine trouble and identify problems when buying or selling a used vehicle with the MULTOBD scan tool.

Features:

Display: backlight 128 x 64 pixel display with contrast adjustment

easy-to-read screen and also saves up to 15 scans for later viewing.

Operating temperature: 0-50 C (-32 to 122F)

External power: 8.0 to 15.0 volts provided by vehicle battery

Internal Power: 3 AAA battery (included)

Specifications:

Power: directly from the vehicle or by X3 AA batteries

Unit dimensions: 9 x 20 x 3cm / 3.3 x 8 x 1.2" (W x L x D)

Screen dimensions: 6 x4.5cm / 2.3 x 1.6" (W x L)

Cable length: 109cm /43"

Compatibility:

This is an OBDII and EOBD scanner which supports the following protocols:

CAN

KWP 2000

ISO 9141-2

PWM

VPW

The D900 CanScan is brand new and is supplied with: scanner unit OBD II connector cable, disc with comprehensive user manual, OBD information and compatibility list and padded storage case with wrist strap.

Supports ISO, VPW and PWM bus systems as well as can bus systems

U.S. Models - European - Japanese - Asian - German - Korean:

Suitable for almost all cars after 1996 .

GM '96 - Current Year (OBD-II)

Ford '96 - Current Year (OBD-II)

Chrysler '96 - Current Year (OBD-II)

Toyota '96 - Current Year (OBD-II)

Honda '96 - Current Year (OBD-II)

NISSAN '96 - Current Year (OBD-II)

All other - Asian and European '96 - Current Year (OBD-II)

Functions:

Displays the DTC definitions on screen unlike previous models

Wider coverage: works with CAN-equipped vehicles

Reads and clears all generic, and some manufacturer, specific DTCs

Resets check engine lights

Views OBD II Live data

Views OBD II freeze frame data

Displays I/M readiness status

Retrieves the Vehicle Identification Number (VIN)

Determines the malfunction indicator lamp (MIL) status

Hot keys for quick read and release

Hand held and easy to use with one plug-in only

Highly reliable and accurate

Safely communicates with the onboard computer

No batteries needed for operation powered via detachable OBD2 cable

Battery compartment for off-vehicle reviewing or for when upgrading from PC

Package contains:

Scanner with detachable OBD2 Extension Cable

Nylon carry pouch for transportation of the tool and it's accessories

CD-ROM that includes User Manual

KWP 2000 Plus ECU REMAP Flasher Tuning Tool

USE the KWP2000 PLUS YOU CAN DO:

A. Read and analys your current ECU software;
B.Upgrad the ECU software with a re-mapped file ;
C.Repair ECUs with software problems or corruption.

How do you use the KWP2000 PLUS?

A: You need a computer. Installing KWP2000 Plus software.
B:Connect USB cable to your PC;
C:Connect to your car via standard 16-pin OBD2 connector;
D:Supports high speed ECU flashing
E:Led indications for USB-power Car-power/rx/tx
F:Support KWP2000+ software and other KWP/ ISO software

How to Read and Write data?


to Read to Write
- Click read button to read out the original data
- Click write button and select the file you want to write
- Save the file to you HD, edit or forward it -Follow the instructions on screen
- switch off ignition and wait 10 seconds

Package Included:

6 pc x Connect cables

1 pc x KWP2000+ Main unit

1 pc x Driver CD

KWP 2000 Plus ECU REMAP Flasher Tuning Tool

USE the KWP2000 PLUS YOU CAN DO:

A. Read and analys your current ECU software;
B.Upgrad the ECU software with a re-mapped file ;
C.Repair ECUs with software problems or corruption.

How do you use the KWP2000 PLUS?

A: You need a computer. Installing KWP2000 Plus software.
B:Connect USB cable to your PC;
C:Connect to your car via standard 16-pin OBD2 connector;
D:Supports high speed ECU flashing
E:Led indications for USB-power Car-power/rx/tx
F:Support KWP2000+ software and other KWP/ ISO software

How to Read and Write data?


to Read to Write
- Click read button to read out the original data
- Click write button and select the file you want to write
- Save the file to you HD, edit or forward it -Follow the instructions on screen
- switch off ignition and wait 10 seconds

Package Included:

6 pc x Connect cables

1 pc x KWP2000+ Main unit

1 pc x Driver CD

Honda FLY108 For HONDA FORD MAZDA

FLY108 supports 30 languages:
1. Spanish 2. Slovenia 3. English 4. Greece 5. German 6. Danmark 7. Czechic 8. Chinese(Taiwan) 9. Chinese(China) 10. AmerEnglish 11. Vietnam 12. Turkey 13. Thailand 14. Swedish 15. Russian 16. Portuguese 17. Portuguese(Brazil) 18. Poland 19. Norwegian 20. Holand 21. Korea 22. Japanese 23. Italy 24. Indian 25. Hungary 26. French 27. French(Canada) 28. Finland 29. Spanish(Mexico) 30. Russian

FLY108 functions include:
1.ALL honda vehicles (Include all functions of fly100 and Super gna 600)
2.All ford vehicles(Include all ford functions of original VCM/IDS)
3.All mazda vehicles(Include all mazda functions of original VCM/IDS)
4.mazda Odometer Rewrite by OBD-16 no password

Hardware and software requirements:
1.PC or laptop with either Windows 2000 Professional (SP4 or later) or XP (SP1 or later)
2.Hard disk drive with at least 400MB of free space
3.CD-ROM drive (if a high-speed Internet connection is not available)
4.Ethernet adapter required to connect PC to IDT
5.Monitor capable of displaying in VGA mode or above (1024 x 768 recommended)

Operation Notes:
1.FLY108 can only work for WIN XP and WIN2000. It cannot work for VISTA

FLY108 Kit Includes:
1.FLY108 vehicle communication module
2.OBD-16 Cable
3.Honda-3PIN Cable
4.Ethernet link cable/RJ45 Tie-in
5.One Box

Honda FLY108 For HONDA FORD MAZDA

FLY108 supports 30 languages:
1. Spanish 2. Slovenia 3. English 4. Greece 5. German 6. Danmark 7. Czechic 8. Chinese(Taiwan) 9. Chinese(China) 10. AmerEnglish 11. Vietnam 12. Turkey 13. Thailand 14. Swedish 15. Russian 16. Portuguese 17. Portuguese(Brazil) 18. Poland 19. Norwegian 20. Holand 21. Korea 22. Japanese 23. Italy 24. Indian 25. Hungary 26. French 27. French(Canada) 28. Finland 29. Spanish(Mexico) 30. Russian

FLY108 functions include:
1.ALL honda vehicles (Include all functions of fly100 and Super gna 600)
2.All ford vehicles(Include all ford functions of original VCM/IDS)
3.All mazda vehicles(Include all mazda functions of original VCM/IDS)
4.mazda Odometer Rewrite by OBD-16 no password

Hardware and software requirements:
1.PC or laptop with either Windows 2000 Professional (SP4 or later) or XP (SP1 or later)
2.Hard disk drive with at least 400MB of free space
3.CD-ROM drive (if a high-speed Internet connection is not available)
4.Ethernet adapter required to connect PC to IDT
5.Monitor capable of displaying in VGA mode or above (1024 x 768 recommended)

Operation Notes:
1.FLY108 can only work for WIN XP and WIN2000. It cannot work for VISTA

FLY108 Kit Includes:
1.FLY108 vehicle communication module
2.OBD-16 Cable
3.Honda-3PIN Cable
4.Ethernet link cable/RJ45 Tie-in
5.One Box

Easy and convenient generator of microprocessor software dumps

• Support of keys based on the NEC controller. Such as 0x28, 0x35, 0x40, 0x51, 0x57,
0x61, 0x71, 0x81, 0x229.
• Ability to check status and proper operation of Electronic Steering Lock (ESL)
• Ability to program ESL right on a car (No need to replace it)

Supported vehicles:
• W202 (MC68HC05X32 x 2 controller)
• W203 (MC68HC908AZ60 controller)
• W208 (MC68HC05X32 x 2 controller)
• W209 (MC9S12DG128 controller)
• W210 (MC68HC05X32 x 2 controller)
• W211 (MC68HC912DG128A controller)
• W215 (MC68HC908AZ60 controller)
• W220 (MC68HC908AZ60, MC68HC05X32 x 2 controller)
• W230 (MC68HC908AZ60, MC68HC05X32 x 2 controller)
• W639 Vito (MC68HC908AZ60 controller)

Package Including:
1pc x NEC controller programming tool
1pc x Adapter to work with NEC controllers (for soldering)
1pc x USB-cable
1pc x Carrying Case

(No wooden box any more as it's too heavey and cost hight shipping fee.)

OBD2 EOBD ELM327 CAN-BUS Scanner Tool V1.3a

The program is very user-friendly, and easy to learn. It is also very easy to install: simply extract the files into a folder on your computer's hard drive, and you're ready to go. To uninstall the program, simply delete the entire contents of the folder where the program resides.
The software supports two platforms - DOS and Windows.

Supported Vehicles:

Benz 2001/02/03 W203 C200K (ISO)

BMW X5 2002 (ISO) Chevrolet Aveo (ISO)

Citroen C3 2004 (ISO) Daihatsu YRV 2005 (ISO)

Daihatsu YRV Turbo 2006 (ISO)

Fiat Tipo 2002 (ISO)

Ford New?ocus 2006(CAN)

Honda Accord 2006 JDM (ISO)

Honda Accord Euro R 2004 JDM (ISO)

Honda City GD8 (ISO)

Honda Civic ES 1.6A (ISO)

Honda Integra Type R DC5 JDM (ISO)

Honda Jazz 1.4M (ISO)

Hyundai Accent 2004 (ISO)

Hyundai Getz 1.3A 2004 (ISO)

Hyundai Getz 1.6M 2004 (ISO)

Hyundai Matrix 2004 (ISO)

Hyundai Santa Fe 2.4A (ISO)

Hyundai Sonata GLS (ISO)

Hyundai Sonata 2005 (ISO)

Hyundai Tuscani FX (ISO)

Kia Carens 2005 (ISO)

Kia Magentis 2005 (ISO)

Kia Rio LS (ISO)

Kia Sorento SUV 2005 (ISO)

Lexus es300 Mazda 2 (CAN)

Mazda 5 (CAN)

Mazda 6 (CAN)

Mazda Premacy 2001 (ISO)

Mazda RX8 (CAN)

Mitsubishi Colt 2003 (ISO)

Mitsubishi Colt Plus 2005 (ISO)

Mitsubishi Eclipse(GST-----Turbo Car can be tested for the year 1995-2000 ；RS/GS----1994-1996 GS all can do；Turbo Car for the year 1996-2000,only have speed and TPS，can clear the DTCS)

Mitsubishi Lancer Evolution IX 2006 (ISO)

Mitsubishi Pajero 3.5 V6 2006 (ISO)

Nissan Sunny B14 (ISO)

Nissan Sunny VIP FB15 (ISO)

Nissan X-Trail 2.0L 2004 (ISO)

Nissan X-Trail 2.5L 2004 (ISO)

Peugeot 206 2001 –Only can show RPM

Peugeot 206 (ISO)

Peugeot 307 (ISO)

Peugeot 407 (ISO)

Renault Megane II 2005 (ISO)

Renault Kangoo 2006 (ISO)

Subaru Impreza 1.6TS 2002 (ISO)

Subaru Impreza WRX 2005 (ISO)

Toyota Camry 2.0A 2004 (ISO)

Toyota Camry 2.4A 2005 (ISO)

Toyota Corolla Altis 1.6A 2005 (ISO)

Toyota Corolla GLXi G8 1999 (ISO)

Toyota Corolla G9 2002 (ISO)

Toyota Vios 2004 (ISO)

Not available veichles:

Mazda 323 Protege 2003 (OBD-I)

Mitsubishi Lancer 1.6M 2006

Nissan Sunny (N16)

Nissan Cefiro (Teana) 2005

Nissan sentra 1.8 2000/2005

Nissan Cefiro (Teana) 2005

Proton Perdana V6

Subaru Legacy GT 2005

Toyota camry 2002

Toyota Wish JDM (Missing Pin 5 in DLC)

Toyota IST JDM (Missing Pin 5 in DLC)

Toyota altis 1.8 2004

Peugeot 206 2000

Suzuki Jimny 1.3 2000

Diesel engine

Function:

Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).

Clear trouble codes and turn off the MIL ("Check Engine" light)

Display current sensor data, including:

Engine RPM

Calculated Load Value

Coolant Temperature

Fuel System Status

Vehicle Speed

Short Term Fuel Trim

Long Term Fuel Trim

Intake Manifold Pressure

Timing Advance

Intake Air Temperature

Air Flow Rate

Absolute Throttle Position

Oxygen sensor voltages/associated short term fuel trims

Fuel System status

Fuel Pressure

Package Including:
1pc x ELM327 main unit
1pc x CD Drive

OBD2 II Scanner Tool GS500

Describtion:

The MaxScan GS500 is the best solution to troubleshoot all 1996 and newer OBD2 Compliant vehicles. The scan tool delivers all nine OBD-II test modes,retriving live engine datastreanm and parameters to enable technicians accurately diagnose the toughest problems.

Features

1. Reads generic and certain proprietary manufacturer diagnostic trouble codes (including pending codes)

2. Erases diagnostic trouble codes

3. Resets the engine check light (MIL - Malfunction Indicator Lamp)

4. Detects OBDII freeze frame information

5. Retrieves the VIN (Vehicle Identification Number), CIN & CVN on vehicles from 2002 that support Mode 9

6. Has a wider vehicle coverage as supports the new CAN-Bus standard

7. Code definitions displayed on unit screen .no need to look them up!

8. No batteries required for operation. power is supplied by the vehicle over the cable

9. Easy to use with friendly menu interface

10. Hot Keys for quick reading & erasing of codes

12. Detachable and replaceable 16-pin OBDII cable

13. Brand new from the factory

14. Built-in OBD II DTC lookup library

15. Reads Live 02 sensor test data

16. Displays Live PCM data stream

17. Displays monitor and I/M readiness status (emissions)

18. Performs a scan of modules present

Functions

1. Misfire

2. Fuel System

3. CCM (Comprehensive Components Monitor)

4. EGR System

5. O2 Sensor

6. Catalyst

7. Evaporative System

8. O2 Sensor Heater

9. Secondary Air

10. Heated Catalyst

11. A/C SystemPlus Many More! (Dependent on manufacturer support

Compatible Vehicles:

American / Australian / Asian / British / European / German / Korean / Japanese

Worldwide

All Other OBDII/CAN-Bus Compatible Vehicles From Year 1994 Onwards

Please Note! A Rough Guide To Compatibility:

Some Worldwide cars from 1994 onwards

USA cars from 1996

Some Australian / Asian / British / European / German / Korean / Japanese petrol cars from 1996

Most Australian / Asian / British / European / German / Korean / Japanese petrol cars from 2001

Most Australian / Asian / British / European / German / Korean / Japanese diesel cars from 2003

Also reads & clears certain manufacturer specific codes for:

GM auxhall/Opel/Ford rysler & Toyota!

Please do not ask if your vehicle is compatible, as I will not be able to help you.

Please carryout your own research or ask your local main dealer for info:

ISO 15765-4 - CAN-Bus

SAE J2480 - CAN-Bus

ISO 14230-4 - KWP 2000

ISO 9141

ISO 9141-2

SAE J1850 - PWM

SAE J1850 - VPW

Specifications

1. Large, 128 x 64 easy-to-read backlit LCD display with adjustable contrast

2. Operating Temperature: 0 to 50 ℃ (-32 ℃ to 122 F℃）

Supported Standards：

ISO 15765-4 - CAN-Bus

SAE J2480 - CAN-Bus

ISO 14230-4 - KWP 2000

ISO 9141

ISO 9141-2

SAE J1850 - PWM

SAE J1850 - VPW

Package includes:

1 main unit

1 interface cable connect the car with the computer

1 user manuel

1 Carry Bag

FAQ:

Q: Can this item be updated?

A: This item can not be updated.

Q: What language this prouct have?

A: This product only have englishe language,no other languages.

SuperVAG K+CAN

Newest Version: V4.8

2010.01.19 update V4.8

Greek language added
UDS protocal added for reading fauty codes and erasing fauty codes

Language

English/Spanish/Italian/Portuguese

Features

support Comprehensive model, support the great majority of VW,Audi,Skoda model.
suport Comprehensive Anti-theft System,such as IMMO1,IMMO2,IMMO3,WFS ,ect.
support K-Lines Can BUS cables
used 32-bit processor, the computing power and the compatibility more stronger
big flash volume , support the cpu extend,can be last upgrade
6. high screen Resolution,richer information
suport system checked, can be checked the error online
upgrade easy and fast,support online upgrade
Man-machine interface more friendly, more convenient operation, easy to learn and use support system since the detection, on-line check system failures

Input convenience, use of multi-function digital keyboard, supports digital Shortcuts
nice looks and generous, using ergonomic design, feel good, easy to control
shell with durable materials, applicable to the complex working environment

Function

This product can be used to odometer correction ,read Security Access Code, key programmer, airbag reset tool, TV Activation and diagnostic for VW Passat,VW ,VW Bora,VW Polo,VW Golf,Audi A6,Audi A8,Audi A4, Skoda Superb, Skoda Octavia, Skoda Fabia vehicles

CAN odometer correction

VW Golf5
VW Jetta (MY2006)
VW Caddy
VW Crossgolf
VW Touaran
VW EOS
VW Individual
VW Passat platform B6 (MY2006)
Seat Toledo (CAN)
Seat Leon (CAN)
Seat Altea
Seat Altea XL
Skoda Octavia II
Skoda Scout
Audi A3
Audi A8
Audi A6
Audi Q7
Audi Allroad 2004+

CAN security access code reading

VW Golf5
VW Jetta (MY2006)
VW Caddy
VW Crossgolf
VW Touaran
VW EOS
VW Individual
VW Passat platform B6 (MY2006)
Seat Toledo (CAN)
Seat Leon (CAN)
Seat Altea
Seat Altea XL
Skoda Octavia II
Skoda Scout
Audi A3
Audi A8 - R/W EEPROM
Audi Q7
Audi Allroad
Audi A6

K-line Security Access Code reading and odometer correction

Audi A2 (K)
Audi A3 VDO/M73 up to 2003 (K)
Audi A4 VDO/M73 (K)
Audi A4 BOSCH (K) up to 2002
Audi A6 VDO (K)
Audi Allroad (K) up to 2004
Audi A8 up to Jan 1999
Audi TT (K)
Seat Alhambra (K)
Seat Arosa (K)
Seat Cordoba after 1999 (K)
Seat Ibiza VDO after 1999 (K) (MY2007 covered)
Seat Leon (K)
Seat Toledo (K)
Skoda Octavia (K)
Skoda Superb (K)
Skoda Roomster (K) (MY2007 covered)
Skoda Fabia (K) (MY2007 covered)
VW Bora (K)
VW Beetle (K)
VW Golf4 VDO/Motometer/BOSCH (K)
VW Jetta (K)
VW Passat (K)
VW Polo VDO/Motometer (K) (MY2007 covered)
VW Sharan (K)
VW T4/T5 VDO (K) (MY2007 covered)

Engine security code and kilometres reading

Suport vehicles :BOSCH VAG-EDC15x, VAG-ME7.1.1, VAG-ME7.1, VAG-ME7.5, VAG-Cartronic ME7.8.

Key programmer

Audi A2
Audi A3 VDO/M73 up to 2003
Audi A4 VDO/M73 up to 2000
Audi A4 after 2000 - petrol engines >= 1.8
Audi A6 VDO (K)
Audi A6 (CAN) petrol engines
Audi Allroad (K) up to 2004
Audi Allroad (CAN) petrol engines
Audi A8 up to 1998
Audi A8 from 2001 to 2002 2.5TDI
Audi A8 (CAN) 2003+ - first component protection generation
Audi TT (K)
Audi Q7 petrol engines
Seat Altea (CAN)
Seat Cordoba after 1999 (K)
Seat Ibiza (VDO) after 1999 (K)
Seat Leon (K+CAN)
Seat Toledo (K+CAN)
Skoda Octavia
Skoda Octavia II (CAN)
Skoda Superb
Skoda Roomster
Skoda Scout (CAN)
Skoda Fabia
VW Phaeton petrol
VW Touareg petrol
VW Bora
VW Beetle
VW Caddy (CAN)
VW EOS (CAN)
VW Golf4 VDO/Motometer
VW Golf5 VDO
VW Crossgolf (CAN)
VW Individual (CAN)
VW Jetta (K+CAN)
VW Passat B5 (K) B6(CAN)
VW Polo5
VW Sharan after year 2000
VW T5
VW Touaran VDO (CAN)
Porsche Cayenne (K)

TV Activation

VAG MMI TV Activation - A6,A8,Q7

Airbag resetting

1C0 909 605 C, 8L0 959 655 A, 1J0 909 609, 6Q0 909 605 C,6Q0 909 605 A, 6Q0
909 605 B, 3B0 959 655 B,1C0 909 605 F, 1C0 909 605 H, 1J0 909 607, 1J0 909
603, 4B0 959 655 C, 4B0 959 655 J, 4D0 959 655 C,8L0 959 655 F8A0 959 655 C,
8A0 959 655 K, 8A0 959 655 K, 4D0 959 655 H, 8D0 959 655 C, 8D0 959 655 L

Diagnostic

Support all of VW, Audi, Seat, and Skada vehicles.

Used as adpters

This product can be used as the following types of communication adapter:

KWP2000
VAG K+CAN 1.4
CAN COMMAND 5
EOBD 1250
EDC16 1244
SuperVag V3.7

SuperVag V3.8

SuperVag V3.9

SuperVag V4.0

SuperVag V4.1

SuperVAG V4.6

SuperVAG V4.8

Toyota Smart Keymaker OBD(Support Toyota Lexus Smart Key)


Safe and efficient: Only need 20 seconds to add one key
It is safe for the security alarm system
Support all kinds of Toyota and Lexus smart key system: support K line and CAN-BUS protocols
It is the most safe and fast key programmer device for Toyota and Lexus series till now.
It supports all key lost
Please read the operation instructions and important notice before making a key



Use the main key to add the other keys:

Connect the programmer to the OBD port of the car, there are some short beep sounds after power on, it enters auto search car status.

Press the start button twice to wake up the anti-theft module. When the connection with the module is done successfully after 7 seconds, there is a long beep 4-5 sounds (4 sounds means the system is IV K system, 5 sounds means V CANBUS system). Wait 30 seconds, there are a long beep sounds, it means the car enter into add key state.

Add smart key: put the original car key (with the logo side) access to the start button, you should hear two beep sounds. SEC light will flash twice; within 5 seconds, put the key close to the start button, you should hear 2 beep sound, SEC light will flash twice; after learn all the smart key, wait 30 seconds till SEC light begin flash, and the car will close adaptation mode automatically.
All the key was lost or only have vice key, need to do initialization:

Press constantly the LED button, and plug into the OBD port of the car, after two short beep sounds, finish press, it enters into auto search car status.

Press the start button twice, in order to wake the anti-theft computer. When the connection with the Computer of car is done successfully after 7 seconds, there is a long beep 4-5 sound (4 sounds mean the system is IV K system, 5 sounds mean V CANBUS system), 5 seconds later, LED light go out. Wait 10-16 minutes,there are a long beep sounds, and LED light flicker, it means the car enter into study key state.

All keys lost matching mode: Add every smart key which need to program(with the logo side)access to the start button, meanwhile you will here two beep sound. SEC light will shine twice; After you finisher studying all the smart keys, wait 30 seconds till SEC light shining, the system will Auto-close study state

Notice:

1. Must use the right new smart keymaker, and follow the right step above, otherwise you take the consequences.

2. If the device can? match the key, and LED light shining constantly, pls clear the error code by using anti-theft system such as T300.

3. After finishing program keys, the key can strat but the SEC light is still turn on, maybe you use the vice key, only main key can manually shut the study mode.

4. Dont try to open the cover of programmer and dash board, otherwise you take the consequences.

5. This machine is only provided for the legal auto repair. Otherwise you will take the above consequences.

Package Including:
1 x Toyota 4C & 4D Chip OBD2 Keymaker

This Colored Spy and Surveillance Camera with audio gives sharp clear FULL COLOR Picture. Plug RCA audio-video cable and the power supply into the camera jack and plug the other end to any ordinary TV and your ready to go. It wont even take you 5 minutes to set this thing up. It is Plug and Play!

You can also easily record video with this miniature spy camera, just connect a VCR. The spy cam can be used for a variety of different security applications; ideal for monitoring entry ways, children's rooms, garage, home office, shop or any other area in your home, business and even for recreational purposes. Because of the small size, these cameras can easily be discretely hidden. Always keep in mind to use the camera in accordance with privacy laws.

• Best performing color wired CMOS camera
• Plug and Watch
• 5 Minutes to set-up
• Advanced CMOS sensor
• In Full Color
• With Audio
• Includes Power Adaptor
• For Recreation and Security
• 
  

Applications

• Front door to see who's knocking (and HEAR what he's saying!)
• Baby's Nursery or Kindergarten Rooms
• Driveway, Lawn and Backyard
• Living Room or any other room
• Cash Register Monitoring
• Workspace and Employee Camera
• Shops and Stores

Note:

The picture on this item only for reference, we will ship the random brand but same type memory card to you because of the stock. If you have favorite brand, please select other item.

Audi 2x2 to OBD2 Adapter

Feature:

This adapter is a connector which allows you to connect the 2x2 port in older (1990 to 1995) pre OBD I vehicles to the OBD II connector for current generation diagnostic tools.

Please note this is an adapter and not an interface cable.

Connects 2x2 port to OBD II connector in 1990-1995 pre OBD I vehicles
High quality precision moulded diagnostic connector made to fit all Audi/VW/Seat/Skoda vehicles
Brand new and factory packaged.
This purchase is for one 16pin adapter cable.

Packing:
1pc x Audi 2x2 to OBD2 Adapter

BMW Airbag Scan/Reset Tool

Detailed Description
Models available for most BMWs built between 1994 and 2003
Displays all SRS fault codes, tells you what's wrong.
Resets the "SRS" Light.
Reset airbag.
Very, very easy to use
With user manual in the package,tell you how to use this item.

BMW Scanner1.36

the version of the BMW-scanner for E38/E39/E46/E53 differs from the previous version (V1.25)
through following opportunities:
The high-grade program module for work with ZKE (Body Control Module) Is added
Functions of adaptation second-hand blocks SRS MRS2-MRS4 (in V1.25 - only MRS4) Are added
Support of the diagnostic report of blocks DME of series ME7 Is added
Functions of installation of indications odometer (miles/km) and language of messages BK
(GE/EN/FR/IT) Are added
The base of support on updating run in IKE and LCM (LCM-4 up to 09.2004) Is added

The new generation of automotive code readers that supportController Area Network(CAN) protocol has arrived. The new model cas810CAN OBD2 auto scanner supports all OBD2 protocols, including the newlyreleased Controller Area Network(CAN) protocol, allowing users to keepup with the latest development in automotive diagnostic scanning.

Features & Benefits
1 Reads Generic Codes(P0, p2, p3, U0) and Manufacturer Specific Codes (P1, P3, and U1)
2 Erases trouble codes and Resets Check Engine Lights
3 Displays I/M Readiness Status and state OBD check
4 Detects OBD2 Freeze Frame Information
5 Determines the malfunction indicator lamp(MIL) status
6 Identifies and Displays Pending Codes
7 Retrieves VIN(Vehicle Identification No.) on 2002 and newer vehicles that support Mode 9
8 Wider vehicle coverage with CAN Protocol support
9 Displays Total # of Codes Retrieved
10 Code definitions displayed on unit screen
11 Memory/battery backup for off-vehicle data review and analysis
12 Unit upgradeable via flash programming
13 Easy to use with friendly menu interface
14 Large, 128 x 64 easy-to-read backlit LCD display with adjustable contrast
15 Hot Keys for quick READ & ERAS
16 Detachable and replaceable 16-pin OBD2 cable

Launch X431 Super 16 Diagnostic Connector

As you are aware, the Launch X-431 has a number of 16-pin OBD II-style plugs, OBD II 16C and CAN 2 are by far the most popular fitments. Although the machine generally tells you what plug to use, this is only after you have connected to the car, so valuable time can be lost.

With the New Launch Super 16, you can avoid all this, because it covers the functions of both these popular plugs. In addition Vectra Cs and Astra Hs are specially catered for by the Super 16, resulting in much greater capability for the X-431, when interrogating these vehicles.

You can use the Super 16 with the Peugeot/Citroen CAN adaptor, to permit access to these vehicles from 2004-2005.

Feature:
Bult-in high speed, low speed double, single line CAN-BUS
OBD II diagnostic connector compatible with all models, easy to operation.

Package Including:
1x Super-16 Connector

Launch X431 Super 16 Diagnostic Connector

As you are aware, the Launch X-431 has a number of 16-pin OBD II-style plugs, OBD II 16C and CAN 2 are by far the most popular fitments. Although the machine generally tells you what plug to use, this is only after you have connected to the car, so valuable time can be lost.

With the New Launch Super 16, you can avoid all this, because it covers the functions of both these popular plugs. In addition Vectra Cs and Astra Hs are specially catered for by the Super 16, resulting in much greater capability for the X-431, when interrogating these vehicles.

You can use the Super 16 with the Peugeot/Citroen CAN adaptor, to permit access to these vehicles from 2004-2005.

Feature:
Bult-in high speed, low speed double, single line CAN-BUS
OBD II diagnostic connector compatible with all models, easy to operation.

Package Including:
1x Super-16 Connector

MaxiScan MS509 OBD2 Scanner Code Reader Live Data

Prints data via your PC!

Reads live PCM Data Stream!

Vehicle Covered:

GM '96 - Current Year (OBD-II)
Ford '96 - Current Year (OBD-II)
Chrysler '96 - Current Year (OBD-II)
Toyota '96 - Current Year (OBD-II)
Honda '96 - Current Year (OBD-II)
NISSAN '96 - Current Year (OBD-II)
All other Asian and European '96 - Current Year (OBD-II)

Features & Benefits
Works on all 1996 & later OBD2 compliant US, European & Asian vehicles.
Easily determines the cause of the “Check Engine Light”.
Retrieves generic (P0, P2, P3, & U0) & manufacturer specific (P1, P3, and U1) codes.
Turns off Check Engine Light, clears codes & resets monitors.
Displays DTC definitions onscreen.
Views freeze frame data.
Displays monitor & I/M readiness status (emissions).
Identifies pending codes.
Reads live PCM data stream.
Displays live O2 sensor test data.
Graphs data – (1996 and newer).
Reads, stores & playbacks live sensor data.
Memory/battery backup for off-vehicle data review & analysis.
Bilingual interface & definitions—English/Spanish.
Performs modules present test.
Retrieves vehicle information (VIN, CID and CVN).
Supports CAN (Controller Area Network) & all other current OBD2 protocols.
Built-in OBD2 DTC lookup library.
Large easy-to-read backlit LCD screen.
Software upgradeable via internet.
Prints data via PC.

Package List:
1pc x Main unit of MS590 Code Scanner
1pc x 6-foot OBD II cable
1pc x USB cable
1pc x CD User's Manual
1pc x Carrying Bag

Features:
Software is 03/2009 Version English
( run on pc with Windows XP only. vista or win7 will destroy it.)
XP-STAR(Auto-Link Blue STAR) realizes all the functions of official factory BENZ Star2000: reading out and erasing trouble code; reading the real-time data of sensor and actuator; coding and programming. It applies the latest high-tech central gateway system of car model 221/211 and 203 with software version updated to October of 2006, can enter all the Benz cars, such as autobus truck, saloon car, sports car, smart car and so on.

New Features:
1.This version of MB STAR C3 can fit all computers,it is not only limited on IBM T30,provide great convenience to customers.It has one hard disk contain DAS and WIS system.
2.With a 7 meter RS232-RS485 cable,provide more convenience to garage when diagnose.
3.Every hard disk has it's special number,have self-test function.Just give us the self-test report and the number,we will find out what's the matter with this tool,avoid the shipping charge when this tool need fix.Great improvement!

FUNCTIONS
1.1989~up to now Car, Bus, Truck, Sprint, Smart ;
2.All electric system Diagnostic;(Do not include flash code)
3.reading trouble code
4.erasing trouble code
5.live-data
6.adaptation
7.component testing
8.maintenance
9.information consultation
10.component location diagram
11.wiring diagram

Testable system:
ENGINE
AUTO-SPEED
AIRCONDITIONAL SYSTEM
SRS
ABS
ASR
MPL
GM
BENZ ORIGINAL ANTI-THEFT
DASX SYSTEM
KEYZESS GO SYSTEM
OBD-II SYSTEM

Product software includes: (Version: 06/2009 )
1.D-A-S: the automatically Diagnosis Assistance System ,Concise interface and straightforward operation with IBM high-quality computer can realize the quick and accurate code reading and the whole car system testing
2.W-I-S net: Workshop Information System Supply the whole view of the wiring diagram in a car,component location diagram and maintenance method. What you do is to enter the chassis number, and then you will get the manufacture data, engine configuration and the car model -all in detail.
3.EPC.net : Electronic Parts Catalog
4.ST Finder:Part location finder
5. STARUTILITIES : the movement management system and self-test

Software Language:
English/Chinese/Deutsch/French/Italian/Spanish/Portuguese/Finnish/Danish/Swedish.

Please leave message while you place order or send us email, tell us what language you need.

Package includes:
1x MULTIPLEXER
1x 16pinOBD II cable
1x 4pin cable
1x 38 pin cable
1x 14pin track cable
1x COM cable
1xRS232 to RS485 Cable
1x Serial adapter cable
One 120G Hard Disc for DAS, EPC and WIS V2008.04, FINDER V2008.02

YH6000 Data Processor for Auto Odometer and Audio

YH6000 (the Data Processor for Automobile Odometer and Audio) is an updated product based on YH3000A, a very popular set among his increasing users. After updated, large scale vehicles extended and more powerful functions it has. It�s mainly used for instrument clusters adjusting and audio decoding and also for memory programming. It can work independently or work with computer at options. Updating through Internet, instruction guiding, automatically reading and adjusting no need to calculations and fully supports latest vehicles.

Features:
1. Handhold operation (no extra pc or computer needed), quick and convenient; Work with computer, updating on line, memory programming.
2. Vehicles extended, most models up to 2004.
3. Automatically read out mileage and adjust directly at will.
4. USB port: Plug and Play.
5. Device intelligent identify, all device can use the same socket.
6. Can be use as a programmer. Let you read, save, display, edit the memory and also send the data back to the manufacturer for technical support.
7. Large display screen, device data can be browsed and analyzed.