VCDS VAG COM VAGCOM 912 HEX CAN USB

Read before you order:

• 1. VAGCOM 912 has the same function as VAGCOM 908, it just support more car models than vagcom 908, not other updates.
• 2. Almost VW, AUDI cars before 2010 year are supported! We can NOT guarantee on all 2010 year cars. And we can NOT 100% guarantee it supports your car, as we can not test every models. Consider before you order it, we can NOT offer you a correct support car list now.
• 3. We only have English version software. We only guarantee it works well on Windows XP. Please use the software provide by our disk only, do NOT use original software which will disable the cable.
• 4. Our vagcom cables can only read and erase error codes, can NOT programming or make parameter adaptions
  

Install tips: -
1. Make sure that software and drivers are installed correctly from the supplied disc.
2. Connected cable to computer, but NOT connect to car, make sure you see [picture 1] as showed below.
3. Run the software, in the option menu press test and save.
4. Close the VCDS software and connect to car., put the ignition key on, without starting engine.
5. Start VCDS software and make the test again.
6. Enjoy it.

If occur error while test, like "interface not found", no response, please try following changes: -
7. Change system time befor November of 2008, for example 20/10/2008
8. Change computer for test.

If unfortunatley all tries are fail, please contact us for help. Please tell us which steps you failed, and capture a screen shot for us. Don't worry, we are here to help you.

[picture 1]

Our software only works well with 32bit Windows XP. Windows Vista or Windows 7, 64bit computer may not support well. (though some customer has success install the cable on Vista and work well(specify the USB driver manually), but we can not guarantee)

Please do NOT use original software of 912. It will disable the cable! Only use the software we provide.

Por favor no utilice el software original de 912. Se deshabilita el cable! Sólo el uso del software que ofrecemos.

Prega di non utilizzare software originale di 912. Esso consente di disattivare la cavo! Utilizzare solo il software che offriamo.

S'il vous plaît n'utilisez pas le logiciel original de 912. Il désactivera le câble! Utilisez uniquement les logiciels que nous fournissons.

Bitte nutzen Sie die Original-Software von 912. Es wird deaktivieren Sie die Kabel! Verwenden Sie nur die Software, die wir liefern.

Beta versions contain new features and functions that have not yet been as fully tested as have Release versions. If you use a Beta, you may find bugs or problems and you are expected to report them to us so that we can fix them before making a new Release. Please be sure that you have also installed the latest version on your computer as well so that you can revert back to using that if you encounter problems with the Beta.

Beta 912.0 includes the following new features and improvements:

Basic Settings for latest Control Modules using UDS/ODX/ASAM protocols.
As is the case for other functions under UDS, there are no longer any channel or group numbers. Instead, the Basic Setting to be performed must be selected from a drop-down list:

On UDS control modules which offer "Instructions", VCDS will automatically display them:

In addition, UDS Measuring Values can be displayed simultaneously:

Added ability to view Measuring Values during UDS Output Tests. This can be handy to verify that certain outputs are functioning as intended:

Improved Readiness screen, now shows name of script in title bar and under [Set Readiness] button, or gives a reason why [Set Readiness] is disabled when that is the case:

Support for new and revised models such as the face-lifted 2010 T5 van.

New, revised and expanded ODX/ASAM data set, supporting Basic Settings function and additional new control modules under UDS.

Works only with Intelligent Interfaces (HEX, KEY and Micro-CAN).

Works on Windows 2000, XP, Vista and 7. Windows 95, 98 and ME are no longer supported.


Keywords:

VCDS V912, vag com912, BETA V912, VAG 912, vag 912, vag com 912, vag com 912, vag-com, vag com, vag V912, vag v912, vag com v912, vag com v912

Features

Working with a computer, this item performs the functions of a factory VAG-1551 or VAG-1552 scan tool and more. This item is fully compatible with almost all VW/AUDI/SEAT/SKODA vehicles, including KKL and CAN-BUS.

Functions

Full support for control modules using the new "Service 22" identification methods.
Support for control modules using the new UDS/ODX/ASAM protocol.
The following functions are supported:
Control Module ID (including Advanced ID), Coding, Security Access, and Fault Codes.
New Session Log capabilities.
Support for Generic OBD-II Mode 10.
Support for vehicles with dual ECUs, or example the RS4 and W12 engines.
Both ECUs are accessible simultaneously via address 31 for Basic Settings such as TBA.
Revised Adaptation screen to support the much longer Long Adaptations now appearing in some control modules.
Revised Advanced ID screen for increased flexibility handling the various data items appearing in the latest control modules.
New internal Gateway Coding Assistant (required for Audi B8 platform cars).
Much improved documentation (Label Files) for many older cars
Module Version - identify the control module part number and coding version
DTC Memory - read and clear manufacturer diagnostic trouble codes
Actual Values - access live data
Activation - selected components can be activated
Code Module - code new control modules (most models through 2002)
Adaptation - read/reset Service Light parameters, view/change block learn values
Basic Settings - view and change control module default settings (Excluding 1.8T 01 and newer)
Individual Values - read individual measuring values
Readiness Code - Check status of applicable emissions related systems
Remote Control Programming - program Radio Frequency keys
Key Matching - match keys to Immobilizer control module (5 digit)

Workable Models

All VW, AUDI, SEAT, and SKODA vehicles, includes those with CAN-BUS system.

What can this interface be used for?

This interface (adapter) is used as an interface and a USB cable to connect a VW/AUDI vehicle to a PC with USB port for on-board diagnostics (OBD).

Specifications

OBDII Plug: J1962 16-Pin Male (to Car)
Connection Port: USB port
Length: 1.8 meters
Weight: About 150g
Color: Black
Powered from car battery over OBD2 connector

SuperVAG K+CAN

Newest Version: V4.8

2010.01.19 update V4.8

Greek language added
UDS protocal added for reading fauty codes and erasing fauty codes

Language

English/Spanish/Italian/Portuguese

Features

support Comprehensive model, support the great majority of VW,Audi,Skoda model.
suport Comprehensive Anti-theft System,such as IMMO1,IMMO2,IMMO3,WFS ,ect.
support K-Lines Can BUS cables
used 32-bit processor, the computing power and the compatibility more stronger
big flash volume , support the cpu extend,can be last upgrade
6. high screen Resolution,richer information
suport system checked, can be checked the error online
upgrade easy and fast,support online upgrade
Man-machine interface more friendly, more convenient operation, easy to learn and use support system since the detection, on-line check system failures

Input convenience, use of multi-function digital keyboard, supports digital Shortcuts
nice looks and generous, using ergonomic design, feel good, easy to control
shell with durable materials, applicable to the complex working environment

Function

This product can be used to odometer correction ,read Security Access Code, key programmer, airbag reset tool, TV Activation and diagnostic for VW Passat,VW ,VW Bora,VW Polo,VW Golf,Audi A6,Audi A8,Audi A4, Skoda Superb, Skoda Octavia, Skoda Fabia vehicles

CAN odometer correction

VW Golf5
VW Jetta (MY2006)
VW Caddy
VW Crossgolf
VW Touaran
VW EOS
VW Individual
VW Passat platform B6 (MY2006)
Seat Toledo (CAN)
Seat Leon (CAN)
Seat Altea
Seat Altea XL
Skoda Octavia II
Skoda Scout
Audi A3
Audi A8
Audi A6
Audi Q7
Audi Allroad 2004+

CAN security access code reading

VW Golf5
VW Jetta (MY2006)
VW Caddy
VW Crossgolf
VW Touaran
VW EOS
VW Individual
VW Passat platform B6 (MY2006)
Seat Toledo (CAN)
Seat Leon (CAN)
Seat Altea
Seat Altea XL
Skoda Octavia II
Skoda Scout
Audi A3
Audi A8 - R/W EEPROM
Audi Q7
Audi Allroad
Audi A6

K-line Security Access Code reading and odometer correction

Audi A2 (K)
Audi A3 VDO/M73 up to 2003 (K)
Audi A4 VDO/M73 (K)
Audi A4 BOSCH (K) up to 2002
Audi A6 VDO (K)
Audi Allroad (K) up to 2004
Audi A8 up to Jan 1999
Audi TT (K)
Seat Alhambra (K)
Seat Arosa (K)
Seat Cordoba after 1999 (K)
Seat Ibiza VDO after 1999 (K) (MY2007 covered)
Seat Leon (K)
Seat Toledo (K)
Skoda Octavia (K)
Skoda Superb (K)
Skoda Roomster (K) (MY2007 covered)
Skoda Fabia (K) (MY2007 covered)
VW Bora (K)
VW Beetle (K)
VW Golf4 VDO/Motometer/BOSCH (K)
VW Jetta (K)
VW Passat (K)
VW Polo VDO/Motometer (K) (MY2007 covered)
VW Sharan (K)
VW T4/T5 VDO (K) (MY2007 covered)

Engine security code and kilometres reading

Suport vehicles :BOSCH VAG-EDC15x, VAG-ME7.1.1, VAG-ME7.1, VAG-ME7.5, VAG-Cartronic ME7.8.

Key programmer

Audi A2
Audi A3 VDO/M73 up to 2003
Audi A4 VDO/M73 up to 2000
Audi A4 after 2000 - petrol engines >= 1.8
Audi A6 VDO (K)
Audi A6 (CAN) petrol engines
Audi Allroad (K) up to 2004
Audi Allroad (CAN) petrol engines
Audi A8 up to 1998
Audi A8 from 2001 to 2002 2.5TDI
Audi A8 (CAN) 2003+ - first component protection generation
Audi TT (K)
Audi Q7 petrol engines
Seat Altea (CAN)
Seat Cordoba after 1999 (K)
Seat Ibiza (VDO) after 1999 (K)
Seat Leon (K+CAN)
Seat Toledo (K+CAN)
Skoda Octavia
Skoda Octavia II (CAN)
Skoda Superb
Skoda Roomster
Skoda Scout (CAN)
Skoda Fabia
VW Phaeton petrol
VW Touareg petrol
VW Bora
VW Beetle
VW Caddy (CAN)
VW EOS (CAN)
VW Golf4 VDO/Motometer
VW Golf5 VDO
VW Crossgolf (CAN)
VW Individual (CAN)
VW Jetta (K+CAN)
VW Passat B5 (K) B6(CAN)
VW Polo5
VW Sharan after year 2000
VW T5
VW Touaran VDO (CAN)
Porsche Cayenne (K)

TV Activation

VAG MMI TV Activation - A6,A8,Q7

Airbag resetting

1C0 909 605 C, 8L0 959 655 A, 1J0 909 609, 6Q0 909 605 C,6Q0 909 605 A, 6Q0
909 605 B, 3B0 959 655 B,1C0 909 605 F, 1C0 909 605 H, 1J0 909 607, 1J0 909
603, 4B0 959 655 C, 4B0 959 655 J, 4D0 959 655 C,8L0 959 655 F8A0 959 655 C,
8A0 959 655 K, 8A0 959 655 K, 4D0 959 655 H, 8D0 959 655 C, 8D0 959 655 L

Diagnostic

Support all of VW, Audi, Seat, and Skada vehicles.

Used as adpters

This product can be used as the following types of communication adapter:

KWP2000
VAG K+CAN 1.4
CAN COMMAND 5
EOBD 1250
EDC16 1244
SuperVag V3.7

SuperVag V3.8

SuperVag V3.9

SuperVag V4.0

SuperVag V4.1

SuperVAG V4.6

SuperVAG V4.8

Features
Working with a computer, this item performs the functions of a factory VAG-1551 or VAG-1552 scan tool and more. This item is fully compatible with almost all VW/AUDI/SEAT/SKODA vehicles, including KKL and CAN-BUS.

Functions
Module Version - identify the control module part number and coding version
DTC Memory - read and clear manufacturer diagnostic trouble codes
Actual Values - access live data
Activation - selected components can be activated
Code Module - code new control modules (most models through 2002)
Adaptation - read/reset Service Light parameters, view/change block learn values
Basic Settings - view and change control module default settings (Excluding 1.8T 01 and newer)
Individual Values - read individual measuring values
Readiness Code - Check status of applicable emissions related systems
Remote Control Programming - program Radio Frequency keys
Key Matching - match keys to Immobilizer control module (5 digit)

Workable Models

All VW, AUDI, SEAT, and SKODA vehicles, includes those with CAN-BUS system.

What can this interface be used for?
This interface (adapter) is used as an interface and a USB cable to connect a VW/AUDI vehicle to a PC with USB port for on-board diagnostics (OBD).

Specifications
OBDII Plug: J1962 16-Pin Male (to Car)
Connection Port: USB port
Length: 1.8 meters
Weight: About 150g
Color: Black
Powered from car battery over OBD2 connector

VAGCOM 912 is available, see if you need it.

http://www.dandebiz.com/vcds-vag-com-vagcom-912-hex-can-usb_p7963.html

VAG 908.1 is out of stock now. VAGCOM 912 will be sent instead.

VAG 908.1 updated ODX data for 2010 models

Our software only works well with 32bit Windows XP. Windows Vista or Windows 7, 64bit computer may not support well. (though some customer has success install the cable on Vista and work well(specify the USB driver manually), but we can not guarantee)

Please do NOT use original software of 908.1. It will disable the cable! Only use the software we provide.

Por favor no utilice el software original de 908,1. Se deshabilita el cable! Sólo el uso del software que ofrecemos.

Prega di non utilizzare software originale di 908,1. Esso consente di disattivare la cavo! Utilizzare solo il software che offriamo.

S'il vous plaît n'utilisez pas le logiciel original de 908,1. Il désactivera le câble! Utilisez uniquement les logiciels que nous fournissons.

Bitte nutzen Sie die Original-Software von 908,1. Es wird deaktivieren Sie die Kabel! Verwenden Sie nur die Software, die wir liefern.

Almost VW, AUDI cars before 2010 year are supported! We can not guarantee on 2010 year cars. And we can not 100% guarantee it supports your car, as we can not test every models. Thank you for your understanding!

Following steps to install: -
1. Make sure that software and drivers are installed correctly from the supplied disc.
2. Connected cable to computer, but NOT connect to car.
3. Run the software, in the option menu press test and save.
4. Close the VCDS software and connect to car., put the ignition key on, without starting engine.
5. Start VCDS software and make the test again.
6. Work ok.

If occur error while test, like "interface not found", no response, please try following changes: -
1. Change system time befor Apr 2009
2. Change computer for test.
3. Change software to test

www.dandebiz.com/freedownload/VAG908_Installer_v100.zip

www.dandebiz.com/freedownload/VAG908_Installer_v150.zip

If unfortunatley all tries are fail, please contact us for exchange! Very sorry!

Supports Measuring Values, Output Tests, and Adaptations on control modules using the new UDS/ODX/ASAM protocol.

Adds new UDS addresses and updated ODX data for 2010 models.

Includes support for TP1.6 protocol which is required for the 6J Ibiza and speeds up access on many modules in other models.

The Select Control Module screen now shows "Installed Modules" rather than "Common Modules" if the car being worked on is new enough to have a proper CAN Gateway.
Modified SRI Screen to show more info and force user to select a job before proceeding.
Adds drop-box function selection in Basic Settings and Adaptation.
Reads Mileage stored in many EDC16 ECUs.
New CODES file, now with over 13, 000 fault code and measuring value texts.
New USB drivers for enhanced PC compatibility and stability.
New firmware for HEX interfaces required for compatibility with 6J Ibiza
Updated Label files; better documentation for new and existing models.



Keywords:

VCDS V908, vag com908, BETA V908, VAG 908.1, vag 908, vag com 908.1, vag com 908, vag-com, vag com, vag V908, vag v908.1, vag com v908, vag com v908

VAGCOM 912 is available, see if you need it.

http://www.dandebiz.com/vcds-vag-com-vagcom-912-hex-can-usb_p7963.html

VAG 908.1 is out of stock now. VAGCOM 912 will be sent instead.

VAG 908.1 updated ODX data for 2010 models

Our software only works well with 32bit Windows XP. Windows Vista or Windows 7, 64bit computer may not support well. (though some customer has success install the cable on Vista and work well(specify the USB driver manually), but we can not guarantee)

Please do NOT use original software of 908.1. It will disable the cable! Only use the software we provide.

Por favor no utilice el software original de 908,1. Se deshabilita el cable! Sólo el uso del software que ofrecemos.

Prega di non utilizzare software originale di 908,1. Esso consente di disattivare la cavo! Utilizzare solo il software che offriamo.

S'il vous plaît n'utilisez pas le logiciel original de 908,1. Il désactivera le câble! Utilisez uniquement les logiciels que nous fournissons.

Bitte nutzen Sie die Original-Software von 908,1. Es wird deaktivieren Sie die Kabel! Verwenden Sie nur die Software, die wir liefern.

Almost VW, AUDI cars before 2010 year are supported! We can not guarantee on 2010 year cars. And we can not 100% guarantee it supports your car, as we can not test every models. Thank you for your understanding!

Following steps to install: -
1. Make sure that software and drivers are installed correctly from the supplied disc.
2. Connected cable to computer, but NOT connect to car.
3. Run the software, in the option menu press test and save.
4. Close the VCDS software and connect to car., put the ignition key on, without starting engine.
5. Start VCDS software and make the test again.
6. Work ok.

If occur error while test, like "interface not found", no response, please try following changes: -
1. Change system time befor Apr 2009
2. Change computer for test.
3. Change software to test

www.dandebiz.com/freedownload/VAG908_Installer_v100.zip

www.dandebiz.com/freedownload/VAG908_Installer_v150.zip

If unfortunatley all tries are fail, please contact us for exchange! Very sorry!

Supports Measuring Values, Output Tests, and Adaptations on control modules using the new UDS/ODX/ASAM protocol.

Adds new UDS addresses and updated ODX data for 2010 models.

Includes support for TP1.6 protocol which is required for the 6J Ibiza and speeds up access on many modules in other models.

The Select Control Module screen now shows "Installed Modules" rather than "Common Modules" if the car being worked on is new enough to have a proper CAN Gateway.
Modified SRI Screen to show more info and force user to select a job before proceeding.
Adds drop-box function selection in Basic Settings and Adaptation.
Reads Mileage stored in many EDC16 ECUs.
New CODES file, now with over 13, 000 fault code and measuring value texts.
New USB drivers for enhanced PC compatibility and stability.
New firmware for HEX interfaces required for compatibility with 6J Ibiza
Updated Label files; better documentation for new and existing models.



Keywords:

VCDS V908, vag com908, BETA V908, VAG 908.1, vag 908, vag com 908.1, vag com 908, vag-com, vag com, vag V908, vag v908.1, vag com v908, vag com v908

Audi VW ACTIVATOR PORSCHE VAG K CAN COMMANDER 3.6

Odometer correct CAN based cars

VW Golf5
VW Jetta (MY2006)
VW Caddy
VW Crossgolf
VW Touaran
VW EOS
VW Individual
VW Passat platform B6 (MY2006)
Seat Toledo (CAN)
Seat Leon (CAN)
Seat Altea
Seat Altea XL
Skoda Octavia II
Skoda Scout
Audi A3
Audi A8
Audi A6
Audi Q7
Audi Allroad 2004+

Security code reading (CAN) / Read/Write EEPROM memory

VW Golf5
VW Jetta (MY2006)
VW Caddy
VW Crossgolf
VW Touaran
VW EOS
VW Individual
VW Passat platform B6 (MY2006)
Seat Toledo (CAN)
Seat Leon (CAN)
Seat Altea
Seat Altea XL
Skoda Octavia II
Skoda Scout
Audi A3
Audi A8 - R/W EEPROM
Audi Q7
Audi Allroad
Audi A6

K-line UPDATE - Odometer correct / Security code reading / Read/Write EEPROM

Audi A2 (K)
Audi A3 VDO/M73 up to 2003 (K)
Audi A4 VDO/M73 (K)
Audi A4 BOSCH (K) up to 2002
Audi A6 VDO (K)
Audi Allroad (K) up to 2004
Audi A8 up to Jan 1999
Audi TT (K)
Seat Alhambra (K)
Seat Arosa (K)
Seat Cordoba after 1999 (K)
Seat Ibiza VDO after 1999 (K) (MY2007 covered)
Seat Leon (K)
Seat Toledo (K)
Skoda Octavia (K)
Skoda Superb (K)
Skoda Roomster (K) (MY2007 covered)
Sko bia (K) (MY2007 covered)
VW Bora (K)
VW Beetle (K)
VW Golf4 VDO/Motometer/BOSCH (K)
VW Jetta (K)
VW Passat (K)
VW Polo VDO/Motometer (K) (MY2007 covered)
VW Sharan (K)
VW T4/T5 VDO (K) (MY2007 covered)

Read/Write EEPROM of Engine Control Units

BOSCH VAG-EDC15x, VAG-ME7.1.1, VAG-ME7.1, VAG-ME7.5, VAG-Cartronic ME7.8. (extracting security code, odometer correction, enable disable immobilizer and s.o.)
Porsche 911 (996/997), Porsche Boxter, Porsche Cayman, Porsche Cayenne - Read EEPROM via OBDII
BOSCH VAG-EDC15x, VAG-ME7.1.1, VAG-ME7.1, VAG-ME7.5, VAG-Cartronic ME7.8, MED9x - FSI, EDC16x - Read flashmemory by OBDII (near update programming of flash memories with function for resetting of reflashing counter)

Key learning function (without need of secutity access code/login)

Audi A2
Audi A3 VDO/M73 up to 2003
Audi A4 VDO/M73 up to 2000
Audi A4 after 2000 - petrol engines >= 1.8
Audi A6 VDO (K)
Audi A6 (CAN) petrol engines
Audi Allroad (K) up to 2004
Audi Allroad (CAN) petrol engines
Audi A8 up to 1998
Audi A8 from 2001 to 2002 2.5TDI
Audi A8 (CAN) 2003+ - first component protection generation
Audi TT (K)
Audi Q7 petrol engines
Seat Altea (CAN)
Seat Cordoba after 1999 (K)
Seat Ibiza (VDO) after 1999 (K)
Seat Leon (K+CAN)
Seat Toledo (K+CAN)
Skoda Octavia
Skoda Octavia II (CAN)
Skoda Superb
Skoda Roomster
Skoda Scout (CAN)
Sko bia
VW Phaeton petrol
VW Touareg petrol
VW Bora
VW Beetle
VW Caddy (CAN)
VW EOS (CAN)
VW Golf4 VDO/Motometer
VW Golf5 VDO
VW Crossgolf (CAN)
VW Individual (CAN)
VW Jetta (K+CAN)
VW Passat B5 (K) B6(CAN)
VW Polo5
VW Sharan after year 2000
VW T5
VW Touaran VDO (CAN)
Porsche Cayenne (K)

Key learning Cayenne (CAN)

VAG MMI TV Activation - A6,A8,Q7

Package Including:
1pc x VAG K+CAN Commander 3.0 Cable
1pc x CD Drive

This product is English version only.

How to install VAG COM 812.4 in my computer? (Guideline)

VAG-COM 812.4

Features:

Compatible with the newest cars which require a direct CAN connection for diagnostics including all Golf-5 platform cars and latest Audi A3, A6 and A8,Q7,etc.

Protocol timing indistinguishable from a real VAG/VAS tool. Works reliably even with "difficult" control modules such as the 1991-1994 1Z Audi TDIs and the 1993-1994 Audi 2.6L with Hella ECU. Built-In VAG-Saver functionality -- instantly alerts the user if either the K/K1 line or the L/K2 line is shorted to Ground or Vbatt.

Full support for dual-K lines found in "new" (B6/8E chassis Audi A4 and 2002+ Audi A6,A8,etc.

1. USB connector plugs into most modern laptops!

2. Compatible with the latest cars which require a direct CAN connection for diagnostics including all Golf-5 platform cars and latest Audi A3, A6 and A8.

3. Protocol timing indistinguishable from a real VAG/VAS tool. Works reliably even with "difficult" control modules such as the 1991-1994 1Z Audi TDIs and the 1993-1994 Audi 2.6L with Hella ECU.

4. Built-In VAG-Saver functionality -- instantly alerts the user if either the K/K1 line or the L/K2 line is shorted to Ground or Vbatt.

5. Full support for dual-K lines found in "new" (B6/8E chassis Audi A4 and 2002+ Audi A6 -- no VAS-6017 required -- no manual switches!

6. Fully backwards compatible with older cars using a single K-line or K plus L.

7. Bi-Color (red/green) status/activity LED

The product description:

OBDII Can USB with the latest cars which require a direct CAN connection for diagnostics including all Golf-5 platform cars and latest Audi A3, A6 and A8,Q7.

Protocol timing indistinguishable from a real VAG/VAS tool.

The possibility that software is complete is on the xxxxx renewal, function all of, support the car type to 2007.

Diagnostics Type including:

All Golf-5 platform cars (A5 platform) including:

• 2003+ VW Touran (1T chassis)
• 2004+ VW Golf (1K chassis)
• 2004+ VW Caddy (2K chassis)
• 2004+ Audi A3 (8P chassis)
• 2004+ Seat Altea (5P chassis)
• 2004+ Skoda Octavia (1Z chassis)
• 2005+ Seat Toledo (5P chassis)
• 2005+ Golf Plus (5M chassis)
• 2005+ Seat Leon (1P chassis)
• 2005.5+ Jetta (1K chassis)
• 2006+ Eos (1F chassis)
• 2003+ Audi A8 and A8L (D3 platform, 4E chassis)
• 2005+ Audi A6 (C6 platform, 4F chassis)
• 2005+ Audi A4 ("B7" platform) (some control modules)
• 2005.5+ VW Passat (B6 Platform, 3C chassis)
• 2006+ Audi Q7 (4L chassis)
• 2007+ Audi R8 (42 chassis)
• 2007+ Audi TT (8J chassis)
• 2007+ VW Touareg (7L6 chassis) ("facelift", built after Nov. 30 2006)

This product is English version only.

How to install VAG COM 812.4 in my computer? (Guideline)

VAG-COM 812.4

Features:

Compatible with the newest cars which require a direct CAN connection for diagnostics including all Golf-5 platform cars and latest Audi A3, A6 and A8,Q7,etc.

Protocol timing indistinguishable from a real VAG/VAS tool. Works reliably even with "difficult" control modules such as the 1991-1994 1Z Audi TDIs and the 1993-1994 Audi 2.6L with Hella ECU. Built-In VAG-Saver functionality -- instantly alerts the user if either the K/K1 line or the L/K2 line is shorted to Ground or Vbatt.

Full support for dual-K lines found in "new" (B6/8E chassis Audi A4 and 2002+ Audi A6,A8,etc.

1. USB connector plugs into most modern laptops!

2. Compatible with the latest cars which require a direct CAN connection for diagnostics including all Golf-5 platform cars and latest Audi A3, A6 and A8.

3. Protocol timing indistinguishable from a real VAG/VAS tool. Works reliably even with "difficult" control modules such as the 1991-1994 1Z Audi TDIs and the 1993-1994 Audi 2.6L with Hella ECU.

4. Built-In VAG-Saver functionality -- instantly alerts the user if either the K/K1 line or the L/K2 line is shorted to Ground or Vbatt.

5. Full support for dual-K lines found in "new" (B6/8E chassis Audi A4 and 2002+ Audi A6 -- no VAS-6017 required -- no manual switches!

6. Fully backwards compatible with older cars using a single K-line or K plus L.

7. Bi-Color (red/green) status/activity LED

The product description:

OBDII Can USB with the latest cars which require a direct CAN connection for diagnostics including all Golf-5 platform cars and latest Audi A3, A6 and A8,Q7.

Protocol timing indistinguishable from a real VAG/VAS tool.

The possibility that software is complete is on the xxxxx renewal, function all of, support the car type to 2007.

Diagnostics Type including:

All Golf-5 platform cars (A5 platform) including:

• 2003+ VW Touran (1T chassis)
• 2004+ VW Golf (1K chassis)
• 2004+ VW Caddy (2K chassis)
• 2004+ Audi A3 (8P chassis)
• 2004+ Seat Altea (5P chassis)
• 2004+ Skoda Octavia (1Z chassis)
• 2005+ Seat Toledo (5P chassis)
• 2005+ Golf Plus (5M chassis)
• 2005+ Seat Leon (1P chassis)
• 2005.5+ Jetta (1K chassis)
• 2006+ Eos (1F chassis)
• 2003+ Audi A8 and A8L (D3 platform, 4E chassis)
• 2005+ Audi A6 (C6 platform, 4F chassis)
• 2005+ Audi A4 ("B7" platform) (some control modules)
• 2005.5+ VW Passat (B6 Platform, 3C chassis)
• 2006+ Audi Q7 (4L chassis)
• 2007+ Audi R8 (42 chassis)
• 2007+ Audi TT (8J chassis)
• 2007+ VW Touareg (7L6 chassis) ("facelift", built after Nov. 30 2006)

VAG CAN Commander 5.1

Compatible with certain models of VW, Audi, Seat, and Skoda
Connect your computer to your car
USB to OBDII - CANBUS connection
Displays live data from your vehicle
Displays diagnostic trouble codes (DTCs) and definitions on screen
Reads and clears all generic DTCs and some manufacturer specific DTCs
Read security access code of immobilizer, eeprom and flash memory of instrument cluster
Plug and play: No need for additional batteries, cables, connectors, or converters

Diagnostics Vehicle Types Including++:

- 2003+ VW Touran (1T chassis)
- 2004+ VW Golf (1K chassis)
- 2004+ VW Caddy (2K chassis)
- 2004+ Audi A3 (8P chassis)
- 2004+ Seat Altea (5P chassis) and Altea XL
- 2004+ Skoda Octavia (1Z chassis)
- 2005+ Seat Toledo (5P chassis)
- 2005+ Golf Plus (5M chassis) - All Golf-5 platform cars (A5 platform)
- 2005+ Seat Leon (1P chassis)
- 2005+ Jetta (1K chassis)
- 2006+ Eos (1F chassis)
- 2003+ Audi A8 and A8L (D3 platform, 4E chassis)
- 2005+ Audi A6 (C6 platform, 4F chassis)
- 2005+ Audi A4 (B7 platform) (some control modules)
- 2005+ VW Passat (B6 Platform, 3C chassis)
- 2006+ Audi Q7 (4L chassis)
- 2007+ Audi R8 (42 chassis)
- 2007+ Audi TT (8J chassis)
- 2005+ Porsche Cayenne
- Skoda: Roomster, Scout

Operating Software Compatibility: Windows 98SE, ME, 2000, XP
OBDII Plug: 16-pin (Male)
USB: 2.0 and backward compatible
Dimensions: L:186cm

Package Contents

USB VAG Diagnostic Cable C 5.1 OBDII
CD with software

VAG CAN Commander 5.1

Compatible with certain models of VW, Audi, Seat, and Skoda
Connect your computer to your car
USB to OBDII - CANBUS connection
Displays live data from your vehicle
Displays diagnostic trouble codes (DTCs) and definitions on screen
Reads and clears all generic DTCs and some manufacturer specific DTCs
Read security access code of immobilizer, eeprom and flash memory of instrument cluster
Plug and play: No need for additional batteries, cables, connectors, or converters

Diagnostics Vehicle Types Including++:

- 2003+ VW Touran (1T chassis)
- 2004+ VW Golf (1K chassis)
- 2004+ VW Caddy (2K chassis)
- 2004+ Audi A3 (8P chassis)
- 2004+ Seat Altea (5P chassis) and Altea XL
- 2004+ Skoda Octavia (1Z chassis)
- 2005+ Seat Toledo (5P chassis)
- 2005+ Golf Plus (5M chassis) - All Golf-5 platform cars (A5 platform)
- 2005+ Seat Leon (1P chassis)
- 2005+ Jetta (1K chassis)
- 2006+ Eos (1F chassis)
- 2003+ Audi A8 and A8L (D3 platform, 4E chassis)
- 2005+ Audi A6 (C6 platform, 4F chassis)
- 2005+ Audi A4 (B7 platform) (some control modules)
- 2005+ VW Passat (B6 Platform, 3C chassis)
- 2006+ Audi Q7 (4L chassis)
- 2007+ Audi R8 (42 chassis)
- 2007+ Audi TT (8J chassis)
- 2005+ Porsche Cayenne
- Skoda: Roomster, Scout

Operating Software Compatibility: Windows 98SE, ME, 2000, XP
OBDII Plug: 16-pin (Male)
USB: 2.0 and backward compatible
Dimensions: L:186cm

Package Contents

USB VAG Diagnostic Cable C 5.1 OBDII
CD with software

Car Scan Tool Scanner Code Reader OVS6 specially for VW/Audi

Description:

The OVS6 code scanner is specially designed to work with most Volkswagen and Audis sold worldwide of 1990 or newer models.

If a VW/AUDI has a 16-pin ?BD-II style ?ata Link Connector (DTC),the code reader will certainly work.

If it has an old-style 2?Data link connector (DTC),then it depends on whether there are 4 or 3 wires connecting to the pins .If there are 4 wires , each connecting a pain ,then it will work .If there are only 3 wires ,leaving one pain disconnected ,then it will work.

For VW/AUDI with old-style 2?Data Link Connector (DTC),you need to have a 2? cabling adapter which is not included in this product package

Features:

A.Works with Volkswagen and Audi (Audi/ Seat/ Skoda/ Jetta/ Golf / Beetle/ Touareg/ GTI/ Passat and more) sold worldwide since 1990.

B.Reads and erases Diagnostic Trouble Codes (DTCs) of engine, ABS, airbags, transmission, radio, climate control(A/C), cent. elect., steering wheel, instruments, immobilizer, etc. (18 Systems)

C.Reads and clears generic trouble codes of cars using ISO 9141-2 ("CARB"), ISO 14230 ("KWP-2000") and ISO- 15765 ("CAN") protocols

D.Turns off MIL lights of engine, airbags, ABS , A/T and most other systems

E.C.A.N.(Controller Area Network) capability

F. Resets oil service light (depends on vehicle support)

G.???Retrieves vehicle information (VIN)

H.Displays I/M Readiness Status

I.Displays DTC definitions on unit screen

J.Highly reliable and accurate

K. Easy to use with friendly interface

L.Safely communicates with the on-board computers

M.Large, easy-to-read backlit LCD

N.System Upgradeable via internet

O.Stand-alone unit with no need for an additional laptop computer to operate



Surpport following protocols:

J1850 PWM
J1850 VPW
KPW 2000
ISO 14230-04
ISO 9141

Will It Work With My Car?

This reader works with the majority of OBD 2, EOBD and CAN-BUS vehicles manufactured worldwide including the following:

Acura Kia
Asuna Land Rover
Audi Lexus
Bentley Lincoln
Buick Mazda
Cadillac Mercury
Chevrolet Mini
Chevy Murkur
Chrysler Nissan
Citroen Oldsmobile
Daewoo Opel
Dodge Peugeot
Eagle Plymouth
Fiat Pontiac
Ford Porsch
Geo Renault
GM Rover
GMC Saab
Honda Saturn
Hummer Scion
Hyundai
Infinity
Isuzu
Jaguar
Jeep

Package include:

1pc x OVS6 Scanner
1pc x .Nylon Carry Case
1pc x OBD II Cable
1pc x User Manual(English)
1pc x CD (OBD2 DTCS)

VAG IMMO3

Description:

Interface connects to RS232 of PC
Read IMMO Login code from supported VAG cars via diagnostic connector
Key learning and adaption via diagnostic connector

Using this device you can read the security Login Code for VAG Cars who are made starting +/- June 2000 to year 2004 and who are using Immobilizer System 3.

Cars models before year 2000 have an older immobilizer system where a Login Code is not integrated in Engine ECU. These old model cars also need a Login Code to program new keys, but in that case you need another Login Code Reader, where a Login Code can be simply read from Instrument Cluster. This login reader can be bought from us too.

Codes from some car models after June 2000 can be read from Instrument Cluster too, but some Instrument Clusters are very hard to access and to read, or they must be scanned before getting access to the Cluster. Well, it will take too much time and sometimes it can be impossible i.e. Audi A4-2001+ (All remaining by OBD.)

In such cases we have a second possibility. We can read out the Login Code by OBD from Engine ECU. This Login Code in Engine ECU is the same as the Log in Code in Instrument Cluster.

With this device you can read the security Login Code for VAG Cars starting at +/-June 2000 till 2004with BOSCH ECU's EDC15/ME7.1/ME7.1.1/ME7.5. These ECU's are in the most engines of VAG Concern from +/-June 2000 till 2004.

Everything is based on K-Line Diagnostic VAG cars, so it doesn't work on Can Bus Diagnostic VAG, i.e. Golf-5, Touareg, etc.

Package Including:

1pc x VAG IMMO3 Cable

1pc x CD Drive

Car Diagnostics USB OBDII 409 Interface VAG-COM Cable

Description:

Primary Function: USB Vag-Com interface cable
OBDII Plug: J1962 16-Pin Male (to Car)
USB Port enabled
Operating Software Compatibility: Windows 98SE / ME / 2000 / NT and XP.
Supports terminal (K) bus communication
Terminal (L) ignition for waking up car computing system (ECU) engine control unit
Has 3 different protocols with same OBD2 connector including ISO/KWP, VPW, PMW.
Refer to your car user manual or check with your car dealer or local mechanic whether your car is compatible with this product.

Compatible Vehicles: Volkswagen, Audi, skoda, seat:

Audi Models:
- Compatible: A2 / A3 / A4 Cabriolet / A6 / A8 / S2 / S3 / TT
- Not Compatible: 80 / 100 / 200 / A3(8P) / A4(B7) / A6(C6/4F) / A8 / A8L(D3/4E) / Q7
SEAT Models:
- Compatible: Alhambra / Altea / Arosa / Cordoba / Ibiza / Inca / Leon MK 1 / Leon MK 2 / Toledo
- Not Compatible: Altea (5P) / Leon (1P) / Toledo (5P)
Skoda:
- Compatible: Fabia / Felicia / Octavia MK 1 / Octavia MK 2 / Superb
- Not Compatible: Octavia (1Z)
VW:
- Compatible: Beetle / Bora / Caddy / Corrado / Golf MK2 / Golf MK3 / Golf MK4 / Jetta MK3 / Jetta MK4/ Lupo / Passat MK3 / Passat MK4 / Polo MK3 / Polo MK4 / Touran / Touareg / Transporter T3 / Transporter T4 / Transporter T5.
- Not Compatible: Caddy (2K) / Golf MK5 (1K) / Golf Plus / Jetta MK5 (1K) / Passat MK5 (B6) / Passat MK6 (B6) / Phaeton /Touran (1T)

Dimension: L:154 (CM)
Manufacturer Ref: C44D47A6AF72
Catalog Ref: Car accessories, cable fault code, VAG-COM, OBD2 cable

Other Features

Also supports ISO9141 protocol
No DC or alternate power supply needed, just connect to your car and computer
Work with most Volkswagen and Audi models sold worldwide from 1994 to current year
The CVFG-A11 cable can not work if your car uses a protocol bus system like VPW, PWM or CAN -bus
The K/L Diagnostic interface cables works on ISO/KWP (Key Word Protocol) that were launched after 1996.

Package Including:

1pc x VAG COM 409.1 Cable
1pc x CD Drive

Features:
- Integrated OBD2 connector
- Indication LED`s for K-Lines
- VIP Edition with much more features than the normal edition
- Can work as KKL Interface with 3rd party software also

Functions:
- diagnostics (incl. airbag feature etc.)
- dashboard correction / adjustment
- imob. programming / reprogramming.

Workable Model:
- almost all VW (Volkswagen and compatible) VDO dashes until 2004
(used in B5, B6, some Audi, Seat, Skoda Fabia, Octavia,Sharan, Galaxy, Alhambra)
- also can handle Magneti Marelli dashes
- all VW Modells that communicate by K-Line and have IMO in Dashboard.

Vagcom COM KKL VAG-COM 409.1

Description:

This diagnostic cable is usable for ISO9141 and KWP2000 transmission protocol like used for example by:

--Volkswagen

--Skoda

--Audi

--Seat

Reference Data

1.This cable can not work if your car uses a protocol/ bussystem like VPW,PWM or Can-bus.

2.Terminal Bus of communication

3.Terminal L= Ignition for waking up car computing system (ECU: Engine Control Unit)

4.Existed 3 different protocols with same OBD2 connector incl. ISO/KWP, VPW, PMW

5.This K/L Diaqnostic interface & cables work on ISO/KWP (Kev Word Protocol) Iaunched after 1996 only

6.Supported also ISO9141 protocol

7.The cables may work with some versions of the Carsoft, but carsoft used a lot of different intercaces during the different versions and also had some custom interfaces.

8. Product running as virtual comport, like many products it usees a USB to Rs232 converter chip .But under special circumstances this can give some problems regarding time especially on the handshake lines.

9. Read & erase error code, log data e. g. speed, gasoline, consume engine-rotating(RPM: Rotation Per Minutes).

Packaged insided:

1 x VAG COM 409.1 Cable
1 x Driver CD

K+CAN Commander 1.4

Features (Deutsch):

1. Diagnostic via CAN-und Spezial-Function via K-Line.

2. Covers all electronic control units in vehicles (diagnostic addresses from 0x01 to 0x80). This can allow of user to investigate and diagnosis some new units untouchable for remaining diagnostic tools. Functions are under CAN-TP2.0.

3. Manual definition of running diagnostic session ¡§C not like remaining diagnostic tools always standard diagnostic session 0x89. Function is under CAN-TP2.0.

4. Broadcast diagnostic request ¡§C disable normal communication, clear DTCs, Logistic (transport) mode,xxxxx Functions are under CAN-TP2.0.

5. Allows managing of brand new units (and immobilizer units) where is allowed programming of PIN, SKC, BGW, MAC. Functions are under CAN-TP2.0.

6. Most of popular diagnostic requests ¡§C identifications, coding, adaptations, DTCs and xxxxx Functions are under CAN-TP2.0.

7. Special Function:

Odometer correction in instrument clusters and EDC15x.

Read Security Access Code/Login WFS.

Read/program immobilizer data.

Read/write EEPROM from instrument cluster/immobilizer. All supported clusters CAN/K.

VAG MMI TV Activation.

Read/Write EEPROM of Engine Control Units BOSCH VAG-EDC15x, VAG-ME7.1.1, VAG-Cartronic ME7.8,Porsche.

Key learning buttons for easy usage (not needed security code). Can do component security authorization.

Key learning Porsche CAYENNE (not needed security code) K+CAN.

Custom memory reading from different units like ECUs, EZS-Kessy and xxxxx.

Reading flash memories EDC16x, EDC15x, ME7x, MED951, MED751 (with next update will be possible programming of flash memories

Crash data clear in airbag units

List of vehicles covered from function odometer change via OBDII:

• Audi Q7 (CAN)
• Audi A2 (K)
• Audi A3 (CAN) bis zu 2007!
• Audi A3 VDO/M73 bis 2003 (K)
• Audi A4 VDO/M73 (K)
• Audi A4 BOSCH - RB4 Cluster (CRYPTO EEPROMs R / W von OBDII)
• Audi A6 VDO (K)
• Audi A6 (CAN)
• Audi Allroud (K) bis 2004
• Audi A8 (K) VDO93xx
• Audi A8 (CAN) bis zu 2007!
• Audi TT (K)
• Seat Alhambra (K)
• Seat Altea (CAN)
• Seat Arosa (K)
• Seat Cordoba nach 1999 (K)
• Seat Ibiza VDO nach 1999 (K)
• Seat Leon (K + CAN)
• Seat Toledo (K + CAN)
• Skoda Octavia (K)
• Skoda Octavia II (CAN)
• Skoda Superb (K)
• Skoda Roomster (K)
• Skoda Scout (CAN)
• Skoda Fabia (K)
• VW Bora (K)
• VW-Käfer (K)
• VW Caddy (CAN)
• VW EOS (CAN)
• VW Golf4 VDO / Motometer / Bosch RB
• VW Golf5 VDO (CAN)
• VW CrossGolf (CAN)
• VW Individual (CAN)
• VW Jetta (K + CAN)
• VW Passat B5/B6 (K + CAN)
• VW Polo VDO / Motometer (K)
• VW Sharan (K)
• VW T4/T5 VDO (K)
• VW Touaran VDO (CAN)